How many square feet will a 3 ton AC cool?

How Much Does It Cost to Install 500 Square Feet of Hardwood Floors? Based on the national average cost per square foot, expect to pay between $2,500 and $5,000 for a 500-square-foot solid wood floor. For engineered wood, plan on forking over roughly $2,000 to $4,500 for installation costs for the same size room.

How many sq feet will a 3 ton AC unit cool?

1,201 to 1,500 square feet homes should use 2.5 tons. If your home size is higher than the number above but is less not more than 1,800 square feet, you can go for a three-ton A/C. Choose a unit that is 3.5 tons if your home measures more than 1,800 but not more 2,100 square feet.

What size AC do I need for a 2000 square foot home?

From all that, we can deduce that a 2,000 sq. ft. home needs a 3.5 ton AC unit.

Is 3 ton AC big enough?

Pro Tip: as a rule of thumb, the maximum AC unit size you need to install should not be more than 15% more than the BTU’s you need to cool your house. This means that if your house requires a 24,000 BTU unit (2 tons), you should not install one that is larger than 30,000 BTU’s (3 tons) to maintain energy efficiency.

What size air conditioner do I need for a 3500 square foot house?

Many homes especially in warm climates have more than one central air conditioner. For example, consider a 3500 square foot home in Zone 2 with a Very Sunny rating. It would need between approx. 76,000 and 104,000 BTUs of cooling!

How many square feet will a 3 ton unit do?

ZONE 2
1.5 Tons 600 – 950 sf
2.5 Tons 1251 – 1550 sf
3 Tons 1501 – 1850 sf
3.5 Tons 1851 – 2150 sf
4 Tons 2151 – 2500 sf

What is a good SEER rating?

There’s no magic SEER number. Anything over 13 is great. Because if you have an old 8 SEER system and replace it with a 16 SEER unit, you could significantly reduce the cost of cooling your home. Don’t forget to look at tax credits and manufacturer’s rebates that can bring the down the cost of a high SEER system.

How many sq ft will a 2.5 ton AC cool?

According to this common but somewhat inaccurate method, you need 1 ton of air cooling capacity for every so many square feet of living space. While there’s some dispute over the exact amount, an often-used amount is 600 square feet. A 2.5-ton unit, then, theoretically would fit a 1,500-square-foot home.

How much does a 3 ton Rheem AC unit cost?

Rheem AC Prices by Unit Size
Unit Size Cooling Area Installed Cost
3 Tons 1600 – 1900 sqft $2,845
3.5 Tons 1900 – 2200 sqft $3,174
4 Tons 2200 – 2600 sqft $3,450
5 Tons 2600 – 3200 sqft $4,160

What SEER AC should I get?

In Northern states, ACs and heat pumps must be at least 13 SEER. In Southern states, 14 SEER is the minimum because the air conditioning season is longer, often from spring into fall. Above the minimum, ACs range to as high as 26 SEER. Heat pumps range to almost 25 SEER.

Is it better to undersize or oversize AC?

Construction Advice: When sizing a cooling system for a home, keep in mind that it’s better to undersize than to oversize. A smaller system may run a bit more often, but it will cost less to operate. A larger system will cost more to operate, in addition to being inefficient, which will cost more money in the long run.

What size AC unit do I need for a 2700 square foot house?

Tonnage Table
Area (Square Feet): BTU Tonnage
2,400 sq ft 48,000 BTU 4 Tons
2,700 sq ft 54,000 BTU 4.5 Tons
3,000 sq ft 60,000 BTU 5 Tons
3,300 sq ft 66,000 BTU 5.5 Tons

What size AC do I need for 2500 square feet?

STEP 1: Determine how many BTUs of heating and tons of AC you need
House Square Footage BTUs Needed
1,200 – 1,400 23,000
1,400 – 1,500 24,000
1,500 – 2,000 30,000
2,000 – 2,500 34,000

How much should a 3 ton air conditioner cost?

AC Installation Costs by Tons
Central Air Conditioner Size AC Unit BTU AC Unit Only
2.5 Tons 30000 BTU $2,895
3 Tons 36000 BTU $2,920
3.5 Tons 42000 BTU $3,550
4 Tons 48000 BTU $3,650

How much does an air conditioner cost for a 2000 sq ft home?

It helps in finding out how much area you want to cool in your home. Installation of a central AC into a 2000 sq. ft. home would cost anywhere between $3,000 to $6,000.

What ton AC do I need?

To estimate your AC tonnage needs, multiply the number of square feet you’re cooling times 25. This equals the total number of BTUs you need to adequately cool your space. Next, divide that number by 12,000 to determine the tonnage capability you need in your new air conditioning unit.

Exit mobile version