| Flooring square footage | Average cost |
|---|---|
| 100 – 250 sq. ft. | $600 |
| 251 – 500 sq. ft. | $750 |
| 501 – 750 sq. ft. | $1,601 |
| 751 – 1000 sq. ft. | $2,100 |
What is the average cost to sand and refinish hardwood floors?
According to HomeAdvisor, the typical price range to refinish hardwood floors is between $1,074 and $2,485, with the national average at $1,757. This comes out to $3 to $8 per square foot, including materials and labor. Roughly 80 percent of the cost to refinish hardwood floors comes from labor.
How much should I pay to have my wood floors refinished?
In Australia, Victoria has the lowest average pay for timber flooring sanding, which costs about $25 per square metre, followed by Queensland with $25.70 per square metre. The cost of floor sanding per square meter in New South Wales is about $28 per square metre.
Is it cheaper to refinish or replace hardwood floors?
In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. … Even if you have this, it will still be less expensive then replacing the whole floor.
How much does it cost to refinish 1200 square feet of hardwood floors?
| Room size | Square feet | Average cost |
|---|---|---|
| 24×24 | 576 | $1,200 – $2,800 |
| Stairs (12 to 14 steps) | — | $300 – $1,200 |
| Whole house | 1,000 | $2,000 – $4,000 |
| Whole house | 1,500 | $2,800 – $6,000 |
Are my wood floors worth refinishing?
Is It Worth It To Refinish Your Hardwood Floors? Yes, it’s worth refinishing hardwood floors instead of replacing them. Refinishing is cost-effective, it’s quicker, and it’s a lot easier because it requires less labor.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
How much should floor sanding cost?
Sanding costs $0.50 to $3.00 per square foot to sand hardwood floors. An average 12 x 14 foot room would cost $80 to $500 depending on how many passes it needs and the area you live in. Regardless of condition, you’ll always want to start by sanding.
How often do wood floors need to be refinished?
A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It’s commonly accepted that you refinish every seven to ten years.
What is the difference between refinishing and resurfacing wood floors?
What’s the Difference? Refinishing involves sanding down the uppermost layer of the floor and applying fresh stain and lacquer over the existing wood. … Resurfacing your floor involves more than just putting a layer of polish on top.
How do you tell if your wood floors can be refinished?
Water Test. Pour a spoonful of water onto the floor. If it forms droplets that stay on the surface of the wood, the floor finish is still good. If the water is slowly absorbed into the wood, the finish is worn and needs to be restored.
Can old hardwood floors be refinished?
The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours, your floors will look as good as new. … With either finish, we recommend a fresh coat every two years or whenever the floor looks worn.
How much does it cost to rip up carpet and put in hardwood?
Labor rates total $4.25 to $9.25 per square foot to remove the old carpet and replace it with hardwood flooring. Adding on to your cost to install hardwood flooring is another $3 to $14 per square foot for the wood too.
Can you refinish floors yourself?
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
How many square feet is a 12×12 room?
How many square feet is a 12×12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).