Kills over 75 kinds of pantry pests, crawling and flying insects and controls a wide range of hard-to-kill insects including: moths, ants, black flies, carpet beetles, cockroaches, crickets, earwigs, fleas, flies, fruit flies, mosquitoes, beetles, spiders, ticks, wasps, yellow jackets, and more.
How quickly does Talstar work?
Answer: It all depends on the insect that is walking over the area treated with Talstar P, but most will die rather quickly, which means within 20 to 30 minutes to a few hours. Larger insects can take longer, such as roaches, scorpions, and spiders can take a day or two sometimes. Definitely not 7 to 10 days.
Which is better Talstar or Bifen?
Answer: Talstar P and Bifen IT are essentially the same product but made by different manufacturers. Bifen IT is the low cost, generic version of Talstar with the same efficiency. Talstar P and Bifen IT both share the benefit of being a low toxic option with minimal dermal toxicity.
How long does Talstar pro last?
And with its flexible label, Talstar Professional is approved in multiple use-sites, so you can use it almost anywhere: indoors and out, in industrial, commercial and food-handling areas. Talstar can last up to 3 months.
Will Talstar get rid of roaches?
Talstar P is labeled for roaches but is not the best choice, especially for German roaches, as they typically require a more aggressive treatment. … The most effective way to treat for German roaches is to use a combination of an insecticide residual spray, strong roach bait gel, and an insect growth regulator (IGR).
Is Talstar good for fleas?
The Talstar is the insecticide that will kill the fleas and leave a residual, and the NyGuard is the birth control that will halt the infestation from growing. Mix these in your sprayer together with water and spray any areas outdoors where you are having a problem with fleas or any other insect.
Is Talstar safe after it dries?
Talstar P (Talstar One) is completely safe after it has dried. Your pets are safe to enter the area even if there is a dew. It will not cause the active ingredient to “reactivate” to a state that could be harmful.
Can you mix Bifen and talstar?
Answer: There would be no valid reason for mixing Bifen XTS with Talstar P or Tengard. Mixing 2-3 insecticides together does not make either stronger and can contaminate an area making it highly repellent so that insects will avoid it and neither can do their job of killing the insects.
What is better than Talstar P?
Onslaught is micro-encapsulated and will last a little longer on outdoor surfaces which does give it a bit of advantage over Talstar P or Bifen IT. You can also use either one to do a barrier treatment around the outside of your home and in your crawl space to stop pests from moving indoors.
Is talstar a Bifen?
Professionals and homeowners alike use Talstar P insecticide to eliminate pest infestations indoors and outdoors. Its potent formula contains bifenthrin and starts to work on contact to remove insects and prevent infestation for more than three months with one application.
Is Talstar Pro safe?
We would recommend our most popular insecticide, Talstar. It is a very safe product to use around children and pets and is widely used by professional companies every day in thousands of homes across the country. It is odorless, can be used indoors and outdoors and it is labeled for over 80 different insects.
Is Talstar a repellent?
Talstar P is a repellent insecticide since it acts quickly enough that social insects such as ants cannot create a pheromone trail. This means that Talstar P will be most effective as a barrier with a thorough application. Talstar P residual can last up to 3 months.
Is Talstar good for spiders?
Talstar Professional is a very good spider spray that can be used outdoors and indoors to kill spiders on contact. Simply spray it on the lawn, under and behind shrubs, vegetation, debris, etc. Talstar Professional will kill spiders on contact and provide control for 2 – 4 weeks.
How do you use Talstar P for roaches?
How to Use Talstar P (Pro) One Insecticide – YouTube
How much is a gallon of talstar?
Answer: The Talstar P product label allows you to use 0.5 fl oz – 1 fl oz per gallon of water for indoor and outdoor spraying. We recommend using the 1 fl oz per gallon of water usage rate for the fastest knockdown and longest lasting residual.
How much talstar per gallon does a mosquito need?
You can use 0.5 oz up to 1 oz per gallon of Talstar P (Talstar One) per gallon of water for mosquito control.
How do you mix Talstar for fleas?
If you want to mix up two gallons of Talstar/Nyguard you will need to add 2 fl oz of Talstar and 6ml of Nyguard in 2 gallons of water and you will need to spray this over a 2,000 sq ft area. Please note that Talstar cannot be broadcast sprayed over carpets and furniture indoors.
How do you use Nyguard?
NyGuard® IGR Concentrate may be applied with a ULV generator or fogger at a rate of 1 ml per 1,000 cubic feet. If used alone, dilute concentrate with water at the rate of 1 ml of concentrate with 1 fl. oz. of water, and fog solution at a rate of 1 fl.
Is Talstar P rain proof?
Talstar P can be applied to a damp or dry lawn. If rain is expected within 6 hours of application, we would recommend waiting until after the rain has stopped to apply. Talstar P is rainfast after about 6 hours.
Is Talstar good for termites?
Repellent Termiticides
Talstar Professional (Bifenthin) – has been a pest control industry standard for years. It is very low cost, and very effective at killing subterranean termites. It is repellent to termites, long lasting in most soils and safe when properly applied.
Is Talstar good for bed bugs?
Answer: Talstar P (Talstar One) will only kill those bugs that contact a treated area and states on the product label it should not be used alone for effective eliminate of bed bugs. This residual can last up to 90 days inside along baseboard, cracks and crevices, etc. It will not prevent a reinfestation.
Can you mix talstar and permethrin?
No, Permethrin SFR and Talstar P are both pyrethroid based insecticides that have about the same 3 to 4 week residual outdoors. Therefore, there would be no benefit to mix these two insecticides together in a tank mixture.
Can you mix Bifen and demon?
There is no valid reason to mix Demon WP/Cyper WP and Talstar P/Bifen IT together. Talstar P/Bifen IT is a synthetic pyrethroid and Demom WP/Cyper WP already contains a synthetic pyrethroid, so there would be nothing to gain by mixing these products together. Making a pesticide too strong can actually backfire.
What is permethrin spray?
Permethrin is a pyrethroid insecticide that is similar to the natural insecticide, pyrethrum. … Permethrin can kill a broad range of pests, such as fleas, ticks, cockroaches, flies, and mosquitoes. Products with permethrin commonly contain piperonyl butoxide (PBO).
Is Talstar P bifenthrin?
Talstar P contains the active ingredient Bifenthrin and can be applied indoors and outdoors with lasting effects. Talstar P is water-based and will not damage plants with solvents.
Is talstar the same as bifenthrin?
Talstar P and Bifen I/T are essentially the same product, just made by two different manufacturers. Both contain 7.9% bifenthrin and cover the same range of pests. Talstar is considered the name brand and Bifen is considered the generic product.
What is the difference between permethrin and bifenthrin?
Answer: Bifen I/T is our most popular choice for mosquito control. … Bifen I/T would also be a better solution then permethrin because permethrin breaks down quicker in sunlight and the Bifen I/T only needs to be applied every 30 days whereas permethrin would need to be applied every two weeks.
Does Talstar work for army worms?
for Insect Control of Ants, Fleas, Ticks, Mealybugs, Armyworms, Mole Crickets, Chinch Bugs and More, Active Ingredient Bifenthrin, Lawns and Landscaped Areas Co.
What chemical kills army worms?
Treat Early for Best Control
An armyworm infestation. If this happens in your yard, you can control armyworms with an insecticide. Apply Ortho® Bug B Gon® Insect Killer for Lawns if you find armyworms in your lawn—they’re surface feeders so you should be able to spot them in the turf.
How toxic is Talstar?
1,2,4-Trimethylbenzene is moderately toxic by ingestion or inhalation. The toxicity by skin exposure is moderate to low. It can cause central nervous system depression, anemia and bronchitis. These aren’t chemicals I would allow around my children or pets.
Is Talstar toxic to humans?
Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. May cause drowsiness and dizziness. Chronic effects Repeated or prolonged exposure may cause central nervous system effects.
Is Talstar harmful to birds?
Answer: Talstar P is labeled for spider control, however, it can be toxic to bees if they’re sprayed directly or if they land on the residual. It is not harmful to birds but it is recommended to keep them and all animals out of the area while making an application. Once the application is completely dry, it’s safe.
What bug spray do professionals use?
Pyrethrin &, Pyrethroids
Pyrethrin and pyrethroids are pesticides used by exterminators. These are active ingredients found in sprays used by experts and only by licensed pest exterminators. This is a chemical pesticide that is used in eliminating pests because it can paralyze pests and will die afterward.
What is Talstar insecticide used for?
Talstar Professional achieves long-lasting control of over 75 pests, including ants, termites, cockroaches, spiders, bed bugs, fleas and ticks.
What do professionals use on bedbugs?
Pyrethrins and Pyrethroids: Pyrethrins and pyrethroids are the most common compounds used to control bed bugs and other indoor pests. Pyrethrins are botanical insecticides derived from chrysanthemum flowers. Pyrethroids are synthetic chemical insecticides that act like pyrethrins.
How long does Talstar take to dry?
Answer: Talstar P is a water based insecticide and it takes the same amount of time as water to dry. In most cases it is dry within 1 hour.
How long does bifenthrin last?
Bifenthrin, though not an instant killer, does kill insects quickly and leaves a long-time residual which can last up to 90 days, meaning you don’t have to reapply as often unless you have a very heavy infestation.
Does Talstar work on mosquitoes?
And unlike other insecticides, Talstar Professional actually kills mosquitoes on contact. Most other products merely act as repellents and allow mosquitoes to live and continue breeding. For effective barrier treatment, Talstar Professional takes care of all your adulticide needs.
Can you use Talstar P in a fogger?
Answer: Talstar is not designed to be used in a fogger of any sort, only sprayers or large mist blowers like a Solo 451. Using Talstar or any other insecticide not designed for a fogger could clog your equipment or lower the efficacy of the product as the ingredient are not designed for this type of application.
Is talstar good for ants?
Talstar XTRA granular insecticide is labeled for use against most ants, (including fire ants), chinch bugs, fleas, ticks, mole crickets, crane flies and many other lawn pests. The new granular product is approved for broadcast lawn, perimeter and mound treatments.
How long does talstar last after mixing?
Answer: Once Talstar P is mixed with water it should be used within 24 hours. Be sure to agitate the solution before using if it sits for a few hours.
How often can you spray Talstar P?
Talstar P can be applied once a month on the outside of the structure and once every 90 days to the indoor cracks and crevices.
What is the mix rate for Talstar?
For 0.06% dilution, mix 1 fluid oz. Talstar Professional per gallon of water (1 fluid oz. = 2 tablespoons). Use the higher rate for heavy pest infestation, quicker knockdown or longer residual control.