According to Pit Boss, you should start your first cooking session with the P setting at 4. This is the factory default setting, and it allows the auger to run at 18-second intervals with 115 seconds in between each cycle. This should get the temperature where you need it to be.
What P setting on Pit Boss gives more smoke?
What P Setting Gives You More Smoke? Setting your grill to a P5 or P6 pauses the auger longer allowing the pellets to burn more, which results in more smoke to enter the pit.
What temperature is smoke setting on Pit Boss?
How should I start my Pit Boss Grill? Start the grill with the lid open on the smoke setting for 10 minutes. (Smoke setting temperature range is 180-210° F/ 80-100° C).
What is the best p setting?
For low and slow-cold weather cooking, it’s best to use the P2 or P3 setting. The lower P-setting in the cold weather will result in a higher grill temperature output and higher pellet consumption, which will help prevent a flame out.
Why won’t my Pit Boss heat up?
The most obvious solution to your Pit Boss not heating up is to make sure that your power outlet works and your unit is plugged in. If not, unplug your Pit Boss and re-plug it, making sure that the GFI circuit doesn’t trip. In case it doesn’t reset, you need to check your circuit breakers.
What does ErL mean on Pit Boss?
The Pit Boss Er1 (some people call it ErL) code means the temperature probe is not making a connection, and the controller determines it can’t correctly read the probe. It’s likely that your grill’s temperature is too low, or a bad internal thermometer.
Can you cook on smoke setting on a Pit Boss?
That said, the Pit Boss can add some smoky flavor to short, fast cooks such as hamburgers, steaks, and even vegetables. If you’re cooking at a higher temperature, you’ll still get a mild wood-fired taste, but nothing really strong.
What is the S setting on Pit Boss?
What Is The Smoke Setting On A Pit Boss Pellet Grill? The “smoke” setting is the “s” or “smoke” on the control board. In this setting, the grill fluctuates between 180°-225°F / 65°-107°C. It’s important to keep the temperature from between those ranges.
Can you leave Pit Boss on smoke setting?
Siding. That’s why leave it on the smoke setting. Now they’ll have been reset to the p4 default
What is the P setting?
The P-Setting, short for Pause Setting, is used on some older grills to help monitor the temperature of the grill when being used in extreme cold or hot temperatures (newer grills monitor this automatically).
What is the P setting on a Boston butt?
Place in smoker at 250 degrees. After 3.5 hours, or when internal temperature hits 145 degrees, remove butt, place in pan fat side down, and add seasoning and drizzle with honey. Cover in foil and return to smoker at 275 degrees. Check for tenderness when pork butt approaches 190 degrees.
Why is my Pit Boss catching fire?
One of the major culprits for your Pit Boss catching fire is excessive oil, grease, or other remains. Be sure to regularly clean your Pit Boss after each use to avoid accidentally catching your smoker on fire. Avoid using excessive heat without sufficient management.