Aim the fire extinguisher at the base of the fire. Squeeze the handle of the fire extinguisher. Sweep the fire extinguisher back and forth.
What is the first priority in the event of a fire?
Fires spread very quickly, so the first priority is to warn others around you. If you’re in a building and it doesn’t delay your escape, then press the nearest fire alarm and call 999 or 112 for emergency help.
What should be your first and most important priority when a fire occurs?
The absolute FIRST PRIORITY in a fire emergency is to evacuate everyone in the home. Time is the most import factor in a fire. Any delay may increase the danger, and decrease people’s chance to escape. CLOSING THE DOORS on the way out will help contain smoke and fire spread – giving more time for evacuation.
What actions should be taken in the event of a fire?
What To Do if a Fire Starts
- Know how to safely operate a fire extinguisher.
- Remember to GET OUT, STAY OUT and CALL 9-1-1 or your local emergency phone number.
- Yell “Fire!” several times and go outside right away. …
- If closed doors or handles are warm or smoke blocks your primary escape route, use your second way out.
What is the first thing you do in case of a fire alarm?
Evacuate the building to the outside and warn others of the fire on the way out. Once you have reached a safe area, call 911. Never re-enter the building. Seek out the first arriving personnel, police officer, fire fighter, EMT, and give them the specific location of the fire or smoke.
What is the first step of the fire response?
General fire response procedures must be implemented immediately upon suspicion of a fire. Remove patients and personnel from the immediate fire area if safe to do so. Activate Alarm and notify others. Activate nearest audible fire alarm by pulling the handle down on alarm.
What are the 4 steps in using a fire extinguisher?
Discharge the extinguisher within its effective range using the P.A.S.S. technique (pull, aim, squeeze, sweep). Back away from an extinguished fire in case it flames up again. Evacuate immediately if the extinguisher is empty and the fire is not out.
What is the correct order of steps to take when a large fire occurs?
Pull the fire alarm and call for help. Alert people in the area to begin evacuation. Assist those with disabilities. Close doors to confine the fire.
Which of these is the first material that starts to burn in a fire caused by smoking?
Mattresses and bedding are the most common materials to burn first in a fire started by a cigarette, cigar, or pipe. Those materials are followed by trash and upholstered furniture, according to the NFPA.
How do we prevent fire from happening in the first place?
- Unplug Items You’re Not Using. Excess electricity flowing through items in your home can always be a potential fire hazard. …
- Use Surge Protectors. …
- Never Leave Flames Unattended. …
- Keep Flammable Items Away From Heat. …
- Don’t Smoke In the Home. …
- Put Out The Fire. …
- Cut The Clutter. …
- Remove Lint And Change Filters.
What is the first thing a nurse should do in the event of a fire?
What should the nurse do first? The nurse remembers RACE and first removes the patient from the room. As they exit the room, the nurse closes the door to confine the fire to that room and then sounds the alarm.
What is the first thing you should do if you discover a fire Mcq?
alert the fire department.
What patients should be evacuated first?
Patients in immediate danger (due to smoke or fire) shall be removed first. Ambulatory patients should be accompanied or directed to an adjacent smoke compartment. Non-Ambulatory patients should be moved using wheelchairs or stretchers when available to an adjacent smoke compartment.
Who should we rescue first in case of fire?
Rescue anyone in the immediate danger area if you can safely do so. 2. Activate the nearest fire alarm pull station to activate the building fire alarm system. The fire alarm will sound throughout the building and notify others of the need to evacuate.
What should you do before during and after a fire incident?
Before, during, and after a wildfire
- Keep an eye on the local news. …
- Learn how to prevent wildfires. …
- Map out your escape routes. …
- Keep flammable items away from your home’s perimeter. …
- Practice fire safety techniques. …
- Make sure your home and belongings are properly insured. …
- Prepare your emergency kit.
What do you do in the event of a fire at home?
What you need to do when a fire starts
- try not to panic.
- tell everyone in the house.
- use your pre-planned escape route to get everyone out of the building as quickly as possible. …
- smoke rises, so stay low or crawl on the floor in the cleaner air where it’s easier to breathe.
What is the most effective method for alerting the fire service in the event of a fire?
1. Alert others of your presence – via a phone, standing at a window, or by opening the window and hanging a sheet or something to alert fire fighters of your presence.
Which of the following is the best response to fire?
Extinguish/Evacuate
Extinguish using the closest fire extinguisher if the fire impedes your evacuation. Evacuate to your designated meeting location.
What is Step 1 of the pass technique?
It’s easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for Pull, Aim, Squeeze, and Sweep. Pull the pin. This will allow you to discharge the extinguisher.
How do you use a First Alert fire extinguisher?
First Alert Kitchen Fire Extinguisher UL Rated Video Overview – YouTube
What is the correct sequence for operating a cartridge fire extinguisher?
Answer: The correct answer is A, Pull, Aim, Squeeze, Sweep.
When operating a portable fire extinguisher it is safest to approach the fire?
Aim the nozzle or outlet towards the base of the fire. Squeeze the handles together to discharge the extinguishing agent inside. To stop discharge, release the handles. Sweep the nozzle from side to side as you approach the fire, directing the extinguishing agent at the base of the flames.
What class is a carbon dioxide fire extinguisher?
Use for Class B Fires. What types of fires can be extinguished with carbon dioxide (CO2) fire extinguishers? Class B fires which involve flammable liquids and gases, solvents, oils, greases (excluding cooking oils/greases in depth) tars, oil-based paints and lacquers.
What action should an employee take first when there’s a fire?
What action should an employee take first when there is a fire? Employees should remain calm and immediately default to the emergency evacuation plan. While proceeding to the nearest designated exit, be sure to use evacuation routes and listen to any additional instructions from your fire team.
What is the primary concern during the event of a fire?
The primary concern in a fire is the prevention of injury. Proper response by individuals will assure the safety of others and limit the damage caused by fire and smoke.
How can fire accidents be prevented in the workplace?
How to Prevent Fire Accidents
- Develop employee awareness. …
- Avoid hot work at the site. …
- Keep your workplace clean. …
- Use explosion-proof electrical equipment. …
- Have a good training program. …
- Keep one supervisor at the site. …
- Eliminate the usage of flammable material. …
- Store flammable and combustible materials properly.
What are the 5 steps to prevent a fire?
5 Tips to Learn How to Prevent House Fires
- Educate Everyone on Fire Risks and Safety. …
- Test Your Smoke Alarms. …
- Keep Lawn Clippings and Other Flammable Items in Safe Places. …
- Keep Pets Contained. …
- Check Your Home Appliances and Wiring.
How can we prevent fire from happening?
HOW TO PROTECT YOURSELF, LOVED ONES AND YOUR HOME
- Create and practice a fire escape plan. Include two ways out of every room. Pick a spot to meet outside. …
- Install and maintain smoke alarms. Place smoke alarms on every level of your home, including inside and outside bedrooms. Test smoke alarms once a month.
What is the first action the RN takes when a fire occurs in a patient’s room?
Immediately push the emergency button in the patient room. This will alert the nurses at the station or the floor that an emergency exists and to respond immediately to assist. Remove the persons from any room where a fire, smoke, or strong smoke smell exists.
Which of the following is the first step of Organising process Mcq?
Solution: Process of Organising – Determination of Objectives, Division of Activities, Grouping of Activities, Defining Authority and Responsibility, Reviewing and Reorganising. So, the first step of the process of organizing is Determination of Objectives: Organisation is established for some objective.
Which three things are needed to start a fire?
Oxygen, heat, and fuel are frequently referred to as the “fire triangle.” Add in the fourth element, the chemical reaction, and you actually have a fire “tetrahedron.” The important thing to remember is: take any of these four things away, and you will not have a fire or the fire will be extinguished.
What is the best safety provision for a floor opening Mcq?
A The floor opening must be properly lit. B Sufficient warning signs must be placed around the floor opening. C The floor opening must be covered with materials capable of carrying heavy loads.
What is the first priority in the event of a fire?
Fires spread very quickly, so the first priority is to warn others around you. If you’re in a building and it doesn’t delay your escape, then press the nearest fire alarm and call 999 or 112 for emergency help.
What is the first direction of travel during an evacuation?
Vertical evacuation –This is an evacuation of all occupants on a floor threatened by fire to a safe floor. The most likely route for evacuation of patients is laterally. Evacuate all patients nearest the danger area first.
Which patients should be evacuated first in the case of fire quizlet?
1. Patients nearest to the fire and smoke will be moved first. 2. Ambulatory patients will be instructed to link hands and will be led to safety.
What is the first step of the fire response?
General fire response procedures must be implemented immediately upon suspicion of a fire. Remove patients and personnel from the immediate fire area if safe to do so. Activate Alarm and notify others. Activate nearest audible fire alarm by pulling the handle down on alarm.
What should you do after the fire incident?
Call 9-1-1. Give first aid where needed, cool and cover burns to reduce the chance of further injury or infection. Let friends and family know you’re safe. People and animals that are seriously injured or burned should be transported to professional medical or veterinary help immediately.
What should you do to prepare for a fire?
Key elements for fire preparedness are:
- regular assessments &, records.
- early warning, i.e. fire warning or voice communication systems such as megaphones.
- adequate means of escape, i.e. minimum 2 clearly signposted safe escape routes, evacuation kits.
- familiarity with the emergency plan through knowledge and practice.
What should we do after fire?
What to do after a house fire
- Find a safe place to stay. …
- Contact your insurance agent. …
- Protect your home. …
- Take care of your pets. …
- Get a copy of the fire report. …
- Address your finances. …
- Recover your possessions. …
- Take care of your family’s mental health.
What are the three basic steps to take during a fire emergency?
In the event of a fire, the following steps should be taken to ensure the safety of all building occupants:
- Activate the fire alarm.
- Call 911 immediately and provide information.
- Assist injured personnel or notify emergency responders of the medical emergency.
- Exit the building following emergency maps.
Which items can help you escape a fire?
4 fire safety products you should always have in the house
- A fire extinguisher. In case of a fire outbreak, every home should have a portable fire extinguisher on every floor of the home. …
- Working smoke detectors. …
- A portable escape ladder. …
- A safe that’s fireproof.
How long can a extension cord be used within Walmart?
In general, extension cords should not exceed 100 feet in length.