Plasterboard comes in several thicknesses including 9.5mm or 3/8 inch and 12mm or 1/2 inch. Large sheets of plasterboard are traditionally 8 ft x 4ft or 2.4m x 1.2m but smaller sheets, called plasterboard laths are available for easy transportation and ease of handling.
What size is 6×3 plasterboard?
Details
| Size: | 6×3 |
|---|---|
| Thickness: | 9.5mm |
| type: | plasterboard |
What sizes do gyprock sheets come in?
Gyprock Standard 13mm works as a general internal wall and ceiling lining in a huge range of commercial applications.
…
Product Options.
| Thickness | 13mm |
|---|---|
| Widths | 900mm 1200mm 1350mm 1400mm |
| Lengths | 2400mm 2700mm 3000mm 3600mm 4200mm 4800mm 6000mm |
What is 9.5 mm plasterboard used for?
9.5mm Knauf Wallboard is strong, versatile and great value plasterboard providing key cladding component in the majority of partitions, linings and ceilings.
What thickness of plasterboard should I use?
For a standard wall, you should purchase plasterboard with a thickness of 12mm and for a ceiling, the preferable thickness of drywall is around 12.5mm. For a bathroom ceiling, you should choose a plasterboard with a thickness of either 12mm or 12.5mm.
Can you get 6mm plasterboard?
6mm Siniat GTEC Contour Board is a strong, lightweight and flexible gypsum plasterboard for creating curved walls and for ceilings, used to create imaginative surfaces. It can also be used for renovating internal walls to achieve a smooth surface.
How many plasterboards are on a pallet?
5MM TE STANDARD (80 PER PALLET)
What is the difference between gyprock and plasterboard?
The short answer is not much.
Gyprock is also known as gypsum board, drywall, or plasterboard. For thousands of years, plaster made from lime, sand, animal hair and other ingredients was used to create a smooth interior finish on building walls and ceilings.
Can you use 10mm gyprock for ceilings?
Standard Gyprock plasterboard or moisture resistant plasterboards such as Gyprock Aquachek can be used for exterior ceilings and eaves lining, provided the ceilings are protected from the weather. A 10mm thick sheet primarily designed for residential walls.
What is 15mm plasterboard used for?
15mm Plasterboard Knauf Wallboard
Knauf Wallboard is plasterboard with an ivory paper face ideally suited to receive a plaster finish or for direct decoration. Typically used for: Partitions. Linings.
Can you dot and dab with 9.5 mm plasterboard?
All dot and dab was done using 9.5mm plasterboard rather than half inch boards. Easier to handle and cut and fix around walls (with door casings) that may be a little out of plumb.
Can I use 9.5 plasterboard on ceilings?
Plasterboard is an important part of the interior construction of most buildings. … The most common plasterboard thickness is 9.5mm and 12.5mm. For ceilings is used 9.5mm thick plasterboard and for walls – 12.5mm.
What is the difference between tapered edge and square edge plasterboard?
Tapered edge plasterboard is commonly used for walls. Its narrower edge profile makes joining or skimming easier. Square edge plasterboard is a more common choice for ceilings or textured finish applications, as the seams between the sheets are less visible.
Can you just paint plasterboard?
You can paint straight onto/over plasterboard in most cases, you simply need to cover the joints and any holes created by your fixings first. Being able to paint directly onto the surface of the new wall is convenient and saves time and money. You can also plaster over painted plasterboard at a later stage.
What size drywall should be used on ceilings?
1/2-Inch-Thick Drywall
Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. These panels are easy to carry and hang.
Can you plaster on the white side of plasterboard?
Inside walls are OK, but you have to have the outside (i.e. white side) of the plasterboard outside and not against the inside wall.
Is there an alternative to plasterboard?
StaarBoard is installed, using the same tools and methods, as traditional plasterboard. Use StaarBoard on your ceilings to give your home, office, factory or any type of building a high insulation value and fantastic energy savings.
What is the thinnest insulated plasterboard?
Types of plasterboard panels
Plasterboards usually come in three thicknesses, 9.5 mm-used for ceilings, and 12.5 mm and 15 mm-used for walls. Insulation plasterboards (PIR) vary in insulation thickness from 25 mm to 65 mm, with 9.5mm and 12,5mm plasterboard base.
Can you get thin plasterboard?
Plasterboard comes in several thicknesses including 9.5mm or 3/8 inch and 12mm or 1/2 inch. … A thin layer of plasterboard joint filler is applied with a wide scraper and lightly sanded down so the surface of the filler finishes absolutely flush with the face of the board.
How many sheets of 15mm plasterboard are on a pallet?
15mm Knauf Plasterboard | Wall Board | Pallet of 60.
Is pink plasterboard fireproof?
Gypsum plasterboard with fire resistant additives with pink paper lining for easy recognition. Gypsum plasterboard with glass fibre and additional additives to increase the fire protection characteristics with pink paper lining for easy recognition.
How heavy is a sheet of 12mm plasterboard?
Specifications
| Brand | Gyproc |
|---|---|
| Insulation thickness | 12.5mm |
| Product length | 2.4m |
| Product width | 1200mm |
| Product weight | 23.7kg |
Is it cheaper to plasterboard or plaster?
For materials alone, wet plaster tends to be cheaper than drywall. However, unless you’re doing the work yourself, this is not what will cost you the money. The real cost of plastering comes from the labour, and the labour costs vary hugely between drywall and plaster.
How much does a sheet of Gyprock cost?
Gyprock plasterboard costs $10 per square metre on average. Gyprock Aquachek costs $10–$12 per square metre, while Gyprock Soundchek costs $8–$10 per square metre. The average Gyprock installation cost is $50 per hour.
What is drywall called in UK?
Plasterboard is also known as gypsum board, drywall, wallboard or wall panels. Commercial brands for plasterboard in the UK include GTEC and Gyproc. When to use plasterboard?
What is the normal thickness of drywall?
Most drywall measures 1/2-inch thick. It’s the most common choice for interior walls because they are easy to carry and hang. If weight is a concern, consider ultra-light half-inch drywall.
How do you cut Gyprock?
Installing Gyprock plasterboard – How to handle, measure and cut
How big is the recess on a gyprock sheet?
Recessed edge (RE) profile – both long edges of the board feature a recess that tapers approximately 60mm in from the edge. Recesses enable jointing, and are easily covered by standard size cornice and skirting. This is the standard choice of profile.
Do you need noggins for 12.5 mm plasterboard?
Well, firstly, you MUST have 12.5mm board. Secondly, you don’t need noggins unless the whole width or length of board will not get attached to joists. The 6 or 7 joists that the board is nailed/screwed to along the length is normal.
Do you need noggins for 15mm plasterboard?
∎ Perimeter noggings are not required for support of 15mm plasterboard on supports at 600mm centres where the ceiling is part of a non-fire rated structure, e.g. ceiling to trusses under a roof void.
How heavy is a 15mm plasterboard?
New Project List
| Product Name | Gyproc WallBoard Plasterboard Tapered Edge 2400 x 1200 x 15mm |
|---|---|
| Product Width | 1200 mm |
| Product Weight | 800 g/m2 |
| Product Length | 2400 mm |
| Thickness | 15 mm |
Can you tile on 9.5 mm plasterboard?
you can only tile onto the 9.5 mm on drylined walls with dabs at no more than 450mm apart, but the 32kg’s per sqm limit, applies to both the 9.5 and 12.5 boards. So if its a stud wall, you have some rethinking to do, but would advise that something like Marmox, Deltaboard, Wedi etc would be your safest bet.
How thick is dry lining?
Depending on the type of wall or surface the plasterboard is being fixed to, two standard thicknesses of plasterboard, 9.5mm and 12.5mm, can be used. Dry lining is also possible around a door frame, with specialist door kits available to fit most standard frames.
How long does dot and dab take to dry?
When you have rendered (roughed) an internal wall you have to wait at least 48 hours for the render to cure to allow for shrinkage before skimming.
Do you plasterboard walls or ceiling first?
Hang drywall on the ceiling first, then the walls.
What size is a half sheet of plasterboard?
Why Choose 15mm Acoustic Plasterboard Half Sheet
Dimensions: 1200mm x 1200mm x 15mm.
How do you screw into plasterboard ceiling?
How to fix into Plasterboard – Video #1 – YouTube
Why are plasterboards tapered?
Tapered edge plasterboard is most commonly used for walls and features a narrower edge profile, making it better suited for either jointing or skimming. Plasterboard with a tapered edge makes it easier to achieve a seamless finish between sheets, providing a sturdy, even base upon which to plaster.
Do you need to tape plasterboard joints?
Reinforcing plasterboard joints with jointing tape provides a strong bond between the sheets and is one way in which these cracks can be prevented.
Can you skim over tapered edge plasterboard?
However, this plasterboard has a tapered edge. You can plaster square and tapered, but tapered is primarily for taping and jointing, square edge for skimming.
Does plasterboard need skimming?
If an existing plaster wall is in good condition – smooth and without major cracks or chips – then you probably don’t need to have it skimmed. If you’ve attached plasterboard, or drylining you have the choice of either painting or decorating straight onto the board, or finishing with a layer of skim plaster.
Do I need to seal plasterboard before painting?
You first need to seal new plaster to make it less absorbent and to help the topcoat adhere better. A common way to seal it is with watered-down emulsion (known as a mist coat), as the plaster sucks up the water and becomes less absorbent.
Can you paper straight onto plasterboard?
2 Answers from MyBuilder Painters &, Decorators
yes, no problem. but you will have to put scrim on the joints and fill them all out at least twice and seal the plasterboard with a thin coat of pva after you have rubbed it all down.