PEX tubes range in diameter from 3/8-inch to 1-inch for residential applications. For adequate water flow, it’s a good idea to install 1/2-inch or 3/4-inch PEX for your main lines. The standard when replacing old water supply lines with PEX is to use the same size.
Are PEX A and PEX B the same size?
Looking at these two pipes side by side, PEX A and PEX B are almost the exact same size. However, the difference lies in the flow restriction.
How do I know if I have PEX A vs PEX B?
Again, the main distinction lies in the manufacturing method, which is what assigns an A, B or C to PEX. PEX A is made using the Peroxide, or Engel, method. PEX B is formed using Silane, or Moisture Cure, method. This is the most common PEX pipe type out there.
What is the biggest size PEX pipe?
PEX pipe is being offered in the larger sizes of 2 1/2 in. and 3 in., allowing greater use and flow in commercial plumbing and hydronic piping applications.
What is the most commonly used PEX fitting?
Crimp style fittings are the most common and affordable type of PEX fittings and can be found in majority of supply houses, home improvement stores and online stores. Brass PEX crimp fittings are manufactured to ASTM F1807 standard. Poly alloy PEX crimp fittings are manufactured to ASTM F2159 standard.
Is SharkBite PEX-A or B?
SharkBite non oxygen barrier pipe is manufacture as PEX-B and SharkBite oxygen barrier pipe is manufactured as PEX-C.
What is the difference between PEX and ProPEX?
The letters PEX stand for cross-linked polyethylene, and this acronym usually refers to a type of water pipe that’s revolutionizing the plumbing and heating industries. PEX pipe is made by a handful of companies, but the best version I’ve discovered so far is part of a system called ProPEX.
Does SharkBite work on PEX-A and B?
Many customers and DIY plumbers have asked us about SharkBite fittings. So, do they work? SharkBite does make a coupling that connects PEX-A to PEX-B. However, we don’t recommend using them.
Which is better PEX crimp or clamp?
If you are looking for a fast and more secure connection that will stand the test of time, crimp tools are your better option. But if you want more flexibility without working more, go for PEX clamps.
Do you need a manifold for PEX?
Do I Have to Use Manifolds with PEX? No. You can install PEX fittings supply just like you would other pipe, with main lines and branches to each fixture. But you lose a lot of the benefits of PEX with this system since it requires so many fittings.
What size is the main water line in a house?
In most cases, the main pipeline from the street to your home is either 3/4 or 1 inch in diameter, supply branches use 3/4-inch-diameter pipe, and pipes for individual components are 1/2 inch. Remember that water pressure decreases by a half-pound per square inch for every foot pipes extend above your water supply.
What size is blue PEX pipe?
3/4 Inch Pex Tubing, 5 Foot Length – Blue Color. The tubing has a 3/4 Inch size and comes in 5 foot lengths which is great for smaller applications that require a shorter distance of tubing. It is important to note that this tubing will use 3/4 inch PEX fittings such as, Barbed or Compression connection fittings.
How far can you run 1 inch water line?
Vertically it can lift it a little over 92 feet. The issue with horizontal distance is friction loss. The longer a horizontal pipe is the less pressure will be delivered at the end while water is flowing. With a valve installed and shut on the end of a mile long pipe there will be 40 psi anywhere in the pipe.
How long does PEX pipe last?
Generally, PEX pipes last for 25 to 40 years before they need to be replaced. By comparison, copper pipes last for around 50 to 70 years.
Is PEX OK for drinking water?
There are no health risks associated with drinking water from PEX pipes. A few types of PEX-pipe may cause prolonged undesirable taste and odour if the water remains in pipes over time.
What is the most reliable PEX connection?
PEX-A, which has the most flexible tubing and best freeze- and kink resistance, is ideal for use with kitchen and bath fixtures. PEX-B is slightly less flexible and less freeze-resistant.
What is wrong with PEX plumbing?
PEX piping has a maximum bend radius, which can lead to stress on the pipe caused by improper installation. In addition, extreme bends and kinks place a very high local stress on the wall of the pipe, making it more susceptible to oxidative degradation.
Can I use blue PEX for hot water?
Color-Coded: Red PEX pipes can be used for hot water supply lines, blue PEX for cold water supply, and white for either hot or cold. These colors are just for your convenience. Plumbing code does not require the pipe color to match the type of water supply.
Which brand of PEX is best?
The Engel method or PEX-A is known as the best type of PEX due to its exceeding that of all international standards set for performance. For example, Sharkbite invented a push-fit fitting which utilizes the consumer to connect PEX tubing without the need for any tools.
Is Zurn PEX-A or B?
Zurn Pex, Inc. chooses the Silane (PEX-b) method to manufacture its tubing. While high degrees of cross-linking can be achieved using this method, it is unnecessary because the density of the base resin for Zurn PEX is higher compared to PEX-a and PEX-c methods.
Is PEX and Uponor the same?
Uponor (formerly Wirsbo) has been making PEX pipe for radiant floor heating since 1970, longer than any other PEX manufacturer.
Can you use SharkBite on PEX type A?
SharkBite push-to-connect fittings listed to ASSE 1061 approved for PEX-A, PEX-B and PEX-C pipe.
Can you use copper crimp rings on PEX A?
Crimp fittings require copper or stainless steel crimp rings and a PEX crimp or clamp tool. Some manufacturers use O-rings on their metal fittings (manufactured to ASTM 2434 standards) to make the seal with the tubing. Crimp fittings are compatible with all types of PEX tubing, except for PEX-AL-PEX.
Can you expand SharkBite PEX?
Slide your expansion ring over the PEX tubing until it overhangs the end of your tubing by no more than one–eighth inch, or until the stop on the ring, if present, touches the tubing. Using a manual or cordless expansion tool, insert the tool into the PEX pipe and expand the pipe.
What is the maximum temperature for PEX tubing?
2) 180°F is the maximum fluid temperature for PEX tubing.
As the temperature increases the max operating pressure drops. Most PEX tubing will be rated for: 160 psi at 73°F.
Can PEX be connected to a hot water heater?
PEX tubing may be connected directly to residential electric tank or tankless (instantaneous) water heaters, if the local code and manufacturer’s instructions allow. When connecting PEX tube to gas tank or tankless water heaters, the tube must be kept at least 6 inches away from the exhaust vent of the heater.
Can you use a regular hose clamp on PEX?
Can a Hose Clamp Be Used With PEX Water Pipes? – YouTube
Can you pinch off PEX tubing?
DIY how to pex pinch clamp – YouTube
Can you crimp PEX without tool?
Shark bite clamps and How to crimp pex connections without crimp tool!
Where is PEX not allowed?
PEX can’t be installed in high heat areas.
You can’t install PEX in high heat areas like near recessed lighting. This also means you can’t connect PEX directly to a hot water heater, but you can use a connecting material to do this.
What size PEX pipe should I use on my house?
PEX tubes range in diameter from 3/8-inch to 1-inch for residential applications. For adequate water flow, it’s a good idea to install 1/2-inch or 3/4-inch PEX for your main lines. The standard when replacing old water supply lines with PEX is to use the same size.
How many fixtures does 1/2 PEX have?
We recommend you create a cheat sheet for your respective pipe sizes, so you don’t have to search for them later. For our example, our 1-inch pipe can have up to 30 fixture units, our 3/4-inch can have up to 14, and our 1/2-inch can have up to 4.
What is the best pipe for main water line?
Both copper and PVC have their uses in modern water distribution systems. Copper, on one hand, is a strong, yet flexible metal that is often the first choice for home plumbing. Professional plumbers and contractors often use copper because it can be used to form pipes with thin but strong walls.
How many fixtures can 3/4 water line supply?
On an 3/4″ supply line you can have two fixtures working together continuously but if, the supply is from Over Head Tank with 20 ‘ head than 3 at a time. So a 3/4″ line is sufficient for a toilet. You should go in for 1″ water line in case you have bath tub too to fill.
What is the difference between white PEX and blue PEX?
Blue PEX pipe carries cold water. White PEX pipe can be used for either hot or cold water. Gray PEX pipe, like white, can be used for either hot or cold water (although not all DIY centers carry gray).
What is the outside diameter of 1/2 inch PEX?
Dimensional data and specifications
| PEX Tubing size (CTS/Nominal) | Outside Diameter (OD) | Weight lbs/100ft |
|---|---|---|
| 1/2″ | 0.625″ | 5.80 |
| 5/8″ | 0.750″ | 8.38 |
| 3/4″ | 0.875″ | 11.00 |
| 1″ | 1.125″ | 17.06 |
What is orange PEX used for?
Designed for use on hot and cold potable water lines, Orange PEX tubing is commonly used for radiant floor and hydronic heating applications.
Can I run my own water line?
It’s not just a pipe dream, because you can still do it on your own! Running water lines in your house comes down to knowing what tools you’ll need, and how to use them to repair or install brand new pipes.
How high will 40 psi lift water?
40 PSI at the base of a building can push water up roughly 92′ but then keep in mind that the pressure will be FAR lower the higher up you get. The relationship between PSI and feet of head is that 2.31 feet of head(or vertical height) = 1 PSI.
What kind of pipe do you use for buried water lines?
HDPE (High Density Polyethylene) pipes are a considered the best choice for underground water lines. What makes this type of piping so great? HDPE pipes are non-toxic, tasteless, and considered a green building material. The pipes are designed to be high crack- and corrosion-resistant.
What is better copper or PEX?
PEX pipe is not only cheaper than copper but more durable too. PEX is immune to corrosion and mineral build-up, and it’s not affected by electrolysis, which can cause small pinhole leaks in copper piping. Copper pipes can last anywhere from six months to the life of a building.
Should I replace copper pipes with PEX?
While copper is an excellent material, no material is perfect. You can develop some problems with your copper pipes, and PEX is often a great replacement that can eliminate these problems. Keep hot water hot: PEX keeps the water warmer as it flows through the pipe so that you get hotter water on the other end.
Which is better PEX or CPVC?
CPVC is More Effective at Maintaining Water Quality than PEX
Third party studies show that CPVC piping, such as FlowGuard Gold pipes and fittings, consistently demonstrate a lower risk of biofilm formation than PEX.