Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/2″ | 19mm | 3/4″ |
| 9/16″ | 21mm | 13/16″ |
| 22mm | 7/8″ | |
| 5/8″ | 24mm | 15/16″ |
What size is a 15/16 socket in MM?
STANDARD / METRIC WRENCH CONVERSION CHART
| BOLT DIAMETER | STANDARD | METRIC |
|---|---|---|
| 1/2″ | 3/4″ | 19mm |
| 9/16″ | 13/16″ | 21mm |
| – | 7/8″ | 22mm |
| 5/8″ | 15/16″ | 24mm |
Is a 15/16 socket the same as a 24mm?
A 24mm socket fits a 24mm metric bolt. It doesn’t fit correctly on any inch-based bolt. It will fit on a 15/16″ bolt but be around 0.2mm too large.
What size is a 15 socket?
Metric Socket Sizes Chart
| 3/8″ Drive | 1/4″ Drive | 1/2″ Drive |
|---|---|---|
| 15mm | 12mm | 18mm |
| 16mm | 13mm | 19mm |
| 17mm | 14mm | 20mm |
| 18mm | 15mm | 21mm |
Do they make a 15/16 socket?
Jetech 1/2 Inch Drive 15/16 Inch Standard Impact Socket, Made with Chrome Molybdenum Alloy Steel, Heat Treated, 6-Point Design, SAE.
What is a 10mm socket used for?
It is a extremely used size. People use it and don’t put it back. Disappears like 1/4″ nut drivers and 7/16″ open end wrenches. For those of you who are non mechanically oriented, the 10 mm socket is probably the most used, most popular metric sized socket around for many medium sized nuts and bolts.
What is a 15mm socket equivalent?
15mm. Just short of 5/8 Inch.
Is 15 16 The same as 23mm?
23mm = 29/32 inch. 24mm = just over 15/16 inch.
What’s equivalent to 24mm socket?
Standard / Metric Wrench Conversion Chart
| Bolt Diameter | Standard | Metric |
|---|---|---|
| 7/8″ | 22mm | |
| 5/8″ | 15/16″ | 24mm |
| 1″ | 25mm | |
| 3/4″ | 1-1/8″ | 29mm |
What can I use instead of a 24mm socket?
Use a 6-point 15/16 socket, and grind off the first 1/16th or so of the socket to eliminate the tapered face. Makes taking them out without stripping 10x easier.
What are the standard socket sizes?
Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Six Point Metric Sockets (9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) Six Point Standard Deep Sockets (1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Six Point Metric Deep Sockets (15, 16, 17, 18, 19, 21, 22)
Is there a 15 32 socket?
From the Manufacturer. The Hitachi 996178 1/4-Inch Hex Quick Change 15/32-Inch Hex Socket adds versatility to your power drills. Finished in a black oxide, this quick-change hex socket is ideal for contractors, serious do-it-yourselfers, machine shops and mechanics.
What are socket sizes in order?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).
What is a spanner used for?
A wrench or spanner is a tool used to provide grip and mechanical advantage in applying torque to turn objects—usually rotary fasteners, such as nuts and bolts—or keep them from turning. In the UK, Ireland, Australia, and New Zealand spanner is the standard term.
What is another size for a 10mm socket?
So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.
What is a 10mm socket equivalent to?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 9mm | 0.354 | |
| 3/8″ | 0.375 | |
| 10mm | 0.394 | |
| 13/32″ | 0.406 |
Is 10mm The most common socket?
In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.
What is equivalent to a 16 mm socket?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 5/16″ | 13mm | 1/2″ |
| 3/8″ | 14mm | 9/16″ |
| 7/16″ | 16mm | 5/8″ |
| 1/2″ | 19mm | 3/4″ |
Are 13/16 and 21 mm the same?
21 mm is . 826″, 13/16 is . 812″ . If you are getting a 13/16 socket on those, it’s a pretty sloppy socket.
Will a 9/16 fit a 14mm?
But thats no biggie ~ to answer your question, 9/16 SAE is actually 14.3 Metric, but it is the closest SAE size that will fit a 14mm metric head.
What’s equivalent to a 36mm socket?
Wrench Size And Conversion Table
| Inches | Millimeters | Spanner |
|---|---|---|
| 1.390 | 13/16 Wworth, 15/16 BSF | |
| 1.417 | 36mm | 36mm |
| 1.418 | 1 7/16 AF | |
| 1.480 | 7/8 Wworth, 1in BSF |
What SAE socket is close to 36mm?
A 36mm socket is 1 7/16″ in standard(SAE) size, almost. 1 7/16″ converts into so a 1 7/16 socket is the standard socket that best fits a 36mm fastener.
Is there a 23 mm socket?
Drive 23mm Metric Shallow Socket. This Socket comes with large size markings and a rust resistant coating.
How many mm is 13 16?
Conversion table inches to mm
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.813” | 13/16” | 20.65 mm |
| 0.875” | 7/8” | 22.23 mm |
| 0.938” | 15/16” | 23.83 mm |
| 1” | 1” | 2.54 cm |
How big is a 24mm socket?
1/2″ Drive 24mm 6-Point Metric Standard Length Impact Socket
| Weight | 0.44 lbs |
|---|---|
| Nut End Outside Diameter (B) | 34.5 |
| Socket Length (L) | 41.2 |
| Socket Size | 24 |
| Socket Type | 6 POINT |
What size nut fits a 24mm socket?
Size Chart
| Bolt size | Size | Tolerance |
|---|---|---|
| M16 | 24mm | 24.46 |
| 25mm | 25.46 | |
| 1″ | 25.86 | |
| 9/16″BSW | 26.23 |
What is a 1 inch socket in metric?
1 inch = 25.4 mm.
What size socket fits an M6 bolt?
FLAT HEAD SOCKET CAP SCREW – METRIC
| Size | Head Diameter | Hexagon Socket Size |
|---|---|---|
| M4-0.7 | 8.96 | 2.50 |
| M5-0.8 | 11.20 | 3.00 |
| M6-1.0 | 13.44 | 4.00 |
| M8-1.25 | 17.92 | 5.00 |
How do I know what size socket I have?
How to Determine the Right Size Socket for a Nut
- Turn on the digital caliper and set it to read in inches, not millimeters. …
- Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
- Check the caliper display. …
- Turn on the digital caliper and set it to read in millimeters, not inches.
How do you read socket sizes?
Socket sizes are determined by the size of the socket head and the size of the drive socket. An example of a typical socket size is a 13mm socket with ¼” drive. Although socket heads are available in both metric and imperial sizes, the ‘drive socket’ size of a socket is always imperial.
What are metric socket sizes?
Metric sockets: Ideal for working on imported vehicles, metric sockets’ sizes are measured in millimeters. The most commonly used types are 8 mm, 10 mm and 14 mm sockets.
What is a 15 32 socket in metric?
That’s the formula that our calculator uses to find that 15/32 inch to millimeters is 11.90625 mm. …
Why are monkey wrenches called monkey wrenches?
Charles Moncky, a Baltimore mechanic, invented the monkey wrench around 1858. Moncky’s wrench was named using a purposeful misspelling of his name.
What is spanner size?
Modern spanner sizes refer to the distance across the flats of the hexagonal nut or bolt they would fit. A 17mm spanner therefore fits a nut 17mm across its flats and this is normally a nut to fit a 10mm diameter bolt (M10).
Is a socket set the same as a spanner?
A socket wrench (or socket spanner) is a type of spanner (or wrench in North American English), that uses a closed socket format, rather than a typical open wrench/spanner to turn a fastener, typically in the form of a nut or bolt.
What size bolt uses 10mm socket?
The standard 6mm cap screw has a 10mm head.
Is M10 a 10mm bolt?
M10 (10mm) Thread Size (T) 6.6mm Head Length (H)
Is a 3/8 the same as a 10mm?
It’s the same size. 3/8 is in inch and and its 10mm.