Size AWG: 4/0. Stranding: 18. Conductor Diameter Inches: 0.475. Insulation Thickness Inches: 0.055.
What is the diameter of 4 0 AWG wire?
AWG Copper Wire Size and Data Table Chart @ 100 Degrees F
| AWG | Diameter | |
|---|---|---|
| 0000 (4/0) | 0.4600 | 11.684 |
| 000 (3/0) | 0.4096 | 10.405 |
| 00 (2/0) | 0.3648 | 9.266 |
| 0 (1/0) | 0.3249 | 8.251 |
What diameter is 4 gauge aluminum wire?
Aluminum Wire
| AWG | Diam. (mils) | Ohms/1000ft |
|---|---|---|
| 4 | 204 | 0.408 |
| 5 | 182 | 0.514 |
| 6 | 162 | 0.648 |
| 7 | 144 | 0.817 |
Is 4 0 and 4 AWG the same?
This can be very complex but I will try to simplify #4 awg wire is quite a bit smaller than 4/0 wire. The difference is in the size, (circular Mils) and the amount of current that the wire is able to safely carry.
What size is 4 0 wire?
83. Electrical Wire A.W.G. Size Conversion Table
| Gauge GAGE | Diameter DIAMETER | Weight (Copper) WEIGHT (COPPER) |
|---|---|---|
| A.W.G. | Mil mil | kg/km |
| 4/0 | 460.0 | 953.0 |
| 3/0 | 409.6 | 755.9 |
| 2/0 | 364.8 | 599.4 |
How many amps is #4 aluminum good for?
Allowable Ampacities of Insulated Aluminum or CopperClad Aluminum Conductors
CONTINUE READING BELOW
| Conductor Size (AWG/KCMIL) | 60°C (140°F) TW, UF | 75°C (167°F) RHW, THHW, THW, THWN, XHHW, USE, ZW |
|---|---|---|
| 8 | 35 | 40 |
| 6 | 40 | 50 |
| 4 | 55 | 65 |
| 3 | 65 | 75 |
What size aluminum wire do I need for 100 amp service?
A 100 amp sub panel wiring size requirement is #4 for copper wires and #2 for aluminum wires.
What is number 4 aluminum wire?
$0.41 /ft. Min: 50 ft., Max: 10000 ft.
…
4 AWG XHHW-2 Specifications*:
| Cable Type | XHHW-2 |
|---|---|
| Wire Size | 4 AWG |
| # of Conductors | 1 Conductor |
| O.D. (Inches) | 0.303 |
| Ampacity | 75 |
How do I know what size aluminum wire to use?
Look for #12-gauge wires in the attic or other places where wiring is readily available. If you see only #12 and no #14, aluminum wiring may be present. Aluminum wire must be one wire gauge size larger for a given circuit than if copper was used.
How big is a 4 gauge wire?
Diameter. Wire gauges range from low numbers to high numbers, with smaller numbers referring to smaller diameters and larger numbers representing larger diameters. For example, AWG 4 is 0.2043 inches in diameter, and AWG 40 is . 0031 inches in diameter.
What size wire do I need for a 200 amp service?
Installation of 200 amp electrical service needs a #2/0 AWG copper wire or #4/0 AWG for aluminum or copper-clad wire inside a minimum of 1.5 inches, schedule 40 or 80 PVC conduit for underground service. However, 2 or 2.5 inches is recommended if running 3 wires in the same conduit.
What is #4 copper wire?
4 AWG THHN/THWN-2 Specifications*:
| Cable Type | THHN/THWN-2 |
|---|---|
| Conductor Material | Bare Copper |
| Stranded or Solid | Stranded |
| Number of Strands | 19 |
| O.D. (Inches) | 0.318 |
What is 4 AWG wire used for?
This wire is 4 AWG, good for 95 Amp when used in conduit with less than 3 conductors. This wire is rated for use in dry or wet locations, raceways, or conduit. It can be used outside exposed to the weather as well, though the insulation is not 100% UV-proof and installation in conduit is recommended.
How many amps can 4 0 wire carry?
4/0 Welding Cable carries 310 Amps for 600 volt in-line applications. 4/0 Welding Cable is an extremely flexible cable with pure fine stranded copper. It contains an abrasion-resistant rubber EPDM jacket.
What is the suitable wire for 15 amps aluminum?
For a 15-Amp circuit use #14 copper wire (or #12 copper-clad aluminum wire). The fuse or circuit breaker feeding this circuit is rated for 15 amps. For a 20-Amp circuit use #12 copper wire (or #10 copper-clad aluminum wire).
What size is 4 gauge wire in MM?
Wire Gauge Conversion
| Wire Number (Gauge) | A.W.G. or B&,S (Inches) | A.W.G. Metric (MM) |
|---|---|---|
| 3 | 0.229423″ | 5.827mm |
| 4 | 0.2043″ | 5.189mm |
| 5 | 0.1819″ | 4.621mm |
| 6 | 0.162″ | 4.115mm |
What is the ampacity of 4 0 copper?
Related Resources
| Size | Temperature Rating of Copper Conductor | |
|---|---|---|
| (AWG or kcmil) | 60°C (140°F) | 75°C (167°F) |
| 3/0 AWG | 165 | 200 |
| 4/0 AWG | 195 | 230 |
| 250 KCMIL | 215 | 255 |
What is bigger 4 0 or 250 MCM?
Circular Mils
Kcmil sizes are used instead of AWG for sizes larger than 4/0 AWG. The smallest standard size is 250 kcmil, the largest 2000 kcmil. The sizes follow no obvious logic.
How many amps will #4 copper wire carry?
Wire Size and Amp Ratings
| Wire Size | 75°C (167°F) | |
|---|---|---|
| AWG | (mm²) | Copper |
| 6 | (13.3) | 65 |
| 4 | (21.2) | 85 |
| 3 | (26.7) | 100 |
What wire size do I need to go 100 feet for a 100 amp service to a workshop?
For a 100 amp service, you will need a 1-gauge wire. For 125 amps, you will need a 1-gauge copper wire. For 150 amp, you will need a 1/0-size copper wire.
What size wire do I need for a 100 amp underground 100 ft run?
For a 100 ampere circuit, the conductors will likely be required to be 3 AWG copper or 1 AWG aluminum.
Will 1 0 aluminum wire fit in a 100 amp breaker?
Yes, 1/0 aluminum wire is rated for 100 amps &, fits just fine into the terminals of 100-amp breakers rated for aluminum conductors.
How many amps can aluminum wire handle?
Wire Size &, Amp Ratings
| Copper | Aluminum | |
|---|---|---|
| Wire Gauge Size | 60°C (140°F) NM-B, UF-B | 90°C (194°F) XHHW-2, THHN, THWN-2 |
| 14 | 15 | — |
| 12 | 20 | 25 |
| 10 | 30 | 35 |
What size aluminum wire is rated for 50 amps?
50 amp Aluminum Wire
Aluminum wires are ranked in a different way than copper wires are. For a 50 amp aluminum wire, you should use the No. 4 AWG. The smaller sized the number on the wire is, the larger the wire size.
What size aluminum wire is good for 60 amps?
An amateur will use a 6 AWG wire size for 60 amp 220V. A professional will always use 4 AWG wire size for 60 amp 220V.
Whats bigger 1 0 or 2 0 wire?
1/0 battery cable is 0 AWG, whereas 2/0 battery cable is 00 AWG. The more the number of zeros indicating a cable’s American Wire Gauge measurement, the bigger the cable. So, it is accurate to conclude that a 2/0 is bigger than a 1/0.
What is the diameter of 4 AWG copper wire?
Breaking Force for Copper Wire
| AWG gauge | Conductor Diameter Inches | Ohms per 1000 ft. |
|---|---|---|
| 3 | 0.2294 | 0.197 |
| 4 | 0.2043 | 0.2485 |
| 5 | 0.1819 | 0.3133 |
| 6 | 0.162 | 0.3951 |
What is bigger 2 0 or 2 AWG?
2/0 (two aught – pronounced awe+t) is . 3648″ (9.256 mm) and can carry 145 amps. 2 AWG is smaller, . 2576″ (6,544 mm) and can carry 95 amps.
How thick is 4 gauge wire in inches?
Gauge Thickness chart &, Information:
| Gauge -Thickness | Dimension inches thick | Dimension millimeters thick |
|---|---|---|
| 2 | .258 inch or slightly over 1/4 inch thick | 6.54 mm |
| 4 | .204 inch | 5.189 mm |
| 6 | .162 inch | 4.1mm |
| 8 | .128 a little over 1/8 inch | 3.26 mm |
How many inches is 4 gauge wire?
Wire Gauge Chart
| Gauge A.S.W Close | Diameter Inches | Roll Thread |
|---|---|---|
| 4 | 0.225 0.212 | 1/4-28 1/4-20 |
| 5 | 0.207 | |
| 6 | 0.192 0.190 0.187 0.186 | 12-2812-24 |
| 7 | 0.177 0.167 | 10-32 |
How do I choose a wire size?
To determine what gauge wire you need, consider the carrying capacity and the amount of current the wire needs to conduct (measured in amperage or amps). Wire gauge is directly related to how many amps you need to run through it. The distance you need the wire to go can also impact the gauge of wire you need.
What size wire do I need to run a 100 amp service 200 feet?
Like I said before, for 100 AMP service, you’ll need a #4 AWG copper wire or #2 AWG aluminum or copper-clad wire. If you’re looking to install 200 AMP service, you’ll need a #2/0 AWG copper wire or a #4/0 AWG aluminum or copper-clad wire.
What size wire do I need to run 100 amp Service 150 feet?
What is the right wire size for 100 Amp service 150 feet distance? You should get 2/0 AWG Copper wire or 4/0 AWG Aluminum wire for single-phase circuits. And, 1/0 AWG Copper wire or 3/0 AWG Aluminum wire if you have three-phase circuits. For these wires, the average voltage drop should be 3%.
What is #2 aluminum wire?
USE-2 cables are primarily used for power distribution, in raceways in accordance with National Electrical Code, except that the cable is not rated for use in cable tray. USE- 2 is approved for direct burial and for service entrance below ground.
What wire do you use for 50 amps?
What Is The Appropriate Wire Size For a 50-Amp Circuit Breaker? According to the American Wire Gauge system, the appropriate wire gauge to use in conjunction with a 50-amp breaker is a 6-gauge wire. The 6-gauge copper conductor wire is rated up to 55 amps, making it the perfect choice for this circuit.
What size wire is good for 225 amps?
Wire Size Chart and Maximum Amp Ratings
| SIZE | 60°C (140°F) | 90°C (194°F) |
|---|---|---|
| AWG or kcmil | TYPES TW, UF | TYPES TBS, SA, SIS |
| 3/0 | 165 | 225 |
| 4/0 | 195 | 260 |
| 250 | 215 | 290 |
How far can you run 12 gauge wire on a 15 amp circuit?
You can run a 12 gauge wire up to 70 feet on a 15 amp circuit. That number drops to 50 feet if you run 12 gauge wire on a 20 amp circuit.
Can I use 16-gauge wire for lighting?
Choosing Electrical Wire Size
16-gauge are used for light-duty extension cords supporting 13 amps. 14-gauge are usedfor light fixtures, lamps, lighting circuits with 15 amps. 12-gauge are used in kitchen, bathroom, outdoor receptacles, and 120-volt air conditioners supporting 20 amps.
What is 20amp wire?
Why Wire Gauge Is Important
| Wire Use | Rated Ampacity | Wire Gauge |
|---|---|---|
| Low-voltage lighting and lamp cords | 10 amps | 18-gauge |
| Extension cords (light-duty) | 13 amps | 16-gauge |
| Light fixtures, lamps, lighting circuits | 15 amps | 14-gauge |
| Kitchen, bathroom, and outdoor receptacles (outlets), 120-volt air conditioners | 20 amps | 12-gauge |
What gauge is 3mm wire?
American Wire Gauge to Metric Conversion Table
| AWG | METRIC (mm2) | Our nearest Cable Approx. |
|---|---|---|
| 14 | 2.08 | 2mm2 |
| 13 | 2.62 | 3mm 2 |
| 12 | 3.31 | 3mm2 or 4mm2 |
| 11 | 4.17 | 4.5 mm2 |
What’s bigger 4 gauge or 8 Gauge?
The thickness of a cable or wire is defined by its gauge size. The general rule of thumb is that the smaller the gauge number, the thicker the cable.
What is the difference between 1 gauge and 1 0 gauge?
Pure aluminum wire is equivalent in current carrying capacity of a copper wire two gauges smaller, so pure aluminum 1/0 wire is equivalent to 2 AWG copper wire… depending on how much copper was used to clad this aluminum wire will determine how much more current it can handle above what pure aluminum wire can handle.