What number is 11 64 drill bit?
Drill Bit Size Chart
| Size | Decimal Equivalent | Size |
|---|---|---|
| 71 | 0.026 | 4.25 mm |
| .70 mm | 0.0276 | 4.30 mm |
| 70 | 0.028 | 18 |
| 69 | 0.0292 | 11/64″ |
What size is a #10 bit?
The size of the drill bit plays a critical role in the operation. A wrong bit size may cause damage to the material used. Here, you’ll see what size drill bit is needed for a size 10 screw.
…
What Size Drill Bit for #10 Screw?
| Size of Screw | Drill Hole Size (Softwood) | Drill Hole Size (Hardwood) |
|---|---|---|
| #6 | 5/64″ | 3/32″ |
| #8 | 3/32″ | 1/8″ |
| #10 | 7/64″ | 1/8″ |
| #12 | 1/8″ | 9/64″ |
What are number drill sizes?
Number drill bit gauge sizes range from size 80 (the smallest) to size 1 (the largest) followed by letter gauge size A (the smallest) to size Z (the largest). Although the ASME B94. 11M twist drill standard, for example, lists sizes as small as size 97, sizes smaller than 80 are rarely encountered in practice.
What number is a 3/16 drill bit?
Number drill bit gauge sizes range from size 80 (the smallest) to size 1 (the largest) followed by letter gauge size A (the smallest) to size Z (the largest). Although the ASME B94. 11M twist drill standard, for example, lists sizes as small as size 97, sizes smaller than 80 are rarely encountered in practice.
What size is a #33 drill bit?
Wire Gauge (Number) M2 High-Speed Steel Drills – Premium Swift Bore
| Product No. | 01433 |
|---|---|
| Drill Size | No. 33 |
| Decimal Inches | 0.1130 |
| For Tap Size | 6-40 NF (National Fine SAE) |
| Weight | 0.007 lbs |
What number is a 10mm drill bit?
Drill Bits. Wilko 10mm Masonry Drill Bit Number 21.
What size is #8 drill bit?
What Size Drill Bit for a #8 Screw?
| Size of Screw | Drill Hole Size (Softwood) | Drill Hole Size (Hardwood) |
|---|---|---|
| #5 | 1/16″ | 5/64″ |
| #6 | 5/64″ | 3/32″ |
| #8 | 3/32″ | 1/8″ |
| #10 | 7/64″ | 1/8″ |
What size is a #3 drill bit?
What Size Drill Bit for a #8 Screw?
| Size of Screw | Drill Hole Size (Softwood) | Drill Hole Size (Hardwood) |
|---|---|---|
| #5 | 1/16″ | 5/64″ |
| #6 | 5/64″ | 3/32″ |
| #8 | 3/32″ | 1/8″ |
| #10 | 7/64″ | 1/8″ |
What size is a #6 drill bit?
Drill Bit Sizes For Pre-Drilling For Screws Most Commonly Used Sizes In Bold
| Screw Size | Pilot hole size for hardwoods* | Pilot hole size for softwood** |
|---|---|---|
| #4 | 1/16″ | 3/64″ |
| #5 | 5/64″ | 1/16″ |
| #6 | 3/32″ | 5/64″ |
| #7 | 3/32″ | 5/64″ |
What size is a #13 drill bit?
Drill Chart for Gauge 1-46 (smallest to largest)
| Gauge | Dec. (in.) | Gauge |
|---|---|---|
| 39 | 0.0995 | 16 |
| 38 | 0.1015 | 15 |
| 37 | 0.104 | 14 |
| 36 | 0.1065 | 13 |
How do I know what size my drill bit is?
Tip – Gauge to determine Drill Bit Size – YouTube
What is the standard drill bit size?
Drill Bit Size
There are drill bit sets or packs that usually contain bit sizes that range from 1/16 of an inch to 1/4 of an inch, which are common sizes for home and shop projects. Other sizes of use would include 1/2 of an inch, 7/16 of an inch, 5/16 of an inch and 3/8 of an inch.
What size drill bit do you use for a 3/8 tap?
Tap and Drill Size Chart
| THREADSIZE | DRILL DIAMETER Coarse Thread | TAP DRILLSIZE |
|---|---|---|
| 3/8-16 | .3125 | 5/16 |
| 7/16-14 | .3680 | ‘U’ |
| 1/2-13 | .4219 | 27/64 |
| 9/16-12 | .4844 | 31/64 |
Is 3/8 drill bit the same as 10mm?
3/8″ bits have a nominal size being just ever so slightly under 10mm. You can’t drill a hole of any size and put something in it the same size. It must be a bit smaller than the hole you drill.
What size is a number 43 drill bit?
Downloadable versions:
| Drill size | Diameter (in) | Diameter (mm) |
|---|---|---|
| #43 | 0.0890 | 2.2606 |
| 2.3 mm | 0.0906 | 2.3000 |
| #42 | 0.0935 | 2.3749 |
| 3/32 in | 0.0938 | 2.3813 |
What size is a number 44 drill bit?
The #44 drill bit (. 086 inch OD) is the standard bit used for nail axles from Cub Scout kits and other kits. It can be used to drill axle holes, or to create pilot holes in the standard axle slots.
What size is a number 30 drill bit?
Number Drill Sizes
| Drill | Inch | mm |
|---|---|---|
| 33 | 0.113 | 2.87 |
| 32 | 0.116 | 2.95 |
| 31 | 0.120 | 3.05 |
| 30 | 0.1285 | 3.26 |
What size is a number 40 drill bit?
Number Size Drills
| No. | Dia. |
|---|---|
| 37 | .1040 |
| 38 | .1015 |
| 39 | .0995 |
| 40 | .0980 |
How many MM is a 1/8 drill bit?
Fractional inch drill bit sizes
| Drill size | Diameter (in) | Diameter (mm) |
|---|---|---|
| 7/64 in | 0.1094 | 2.7781 |
| 1/8 in | 0.1250 | 3.1750 |
| 9/64 in | 0.1406 | 3.5719 |
| 5/32 in | 0.1563 | 3.9688 |
What size is a #31 drill bit?
Wire Gauge (Number) M2 High-Speed Steel Drills – Premium Swift Bore
| Product No. | 01531 |
|---|---|
| Drill Size | No. 31 |
| Decimal Inches | 0.1200 |
| For Tap Size | 6-48 NS (National Special) |
| Weight | 0.02 lbs |
What size is a #25 drill bit?
Decimal Equivalents from # 80 to 1″, .0135″ to 1.000″
| Drill | Decimal | Drill |
|---|---|---|
| 9/64 | .1406″ | 9 |
| 27 | .1440″ | 8 |
| 26 | .1470″ | 7 |
| 25 | .1495″ | 13/64 |
What size hole do I drill for a 10mm tap?
Metric Tap and Drill Bit Size Table
| Tap | Metric Drill | US Drill |
|---|---|---|
| 8mm x 1.0 | 7.1mm | – |
| 10mm x 1.5 | 8.7mm | – |
| 10mm x 1.25 | 8.9mm | 11/32″ |
| 10mm x 1.0 | 9.1mm | – |
What can I use instead of a 5/16 drill bit?
5/16 converts to 10/32. Assuming your bit set is that granular, the next larger size is 11/32, and the next smallest size is 9/32. Those aren’t necessarily common sizes, however. The next size up in x/16 would be 6/16, which is 3/8.
What size is tap hole?
A good tap drill is 85% (± 2 pp) of major diameter for coarse threads, and. A good tap drill is 90% (± 2 pp) of major diameter for fine threads.
What size is a number 21 drill bit?
Wire Gauge (Number) M2 High-Speed Steel Drills – Premium Swift Bore
| Product No. | 01421 |
|---|---|
| Drill Size | No. 21 |
| Decimal Inches | 0.1590 |
| For Tap Size | 10-32 NF (National Fine SAE) |
| Weight | 0.015 lbs |
What size is a No 12 drill bit?
6.5mm x 105mm Masonry Drill Bit No. 12.
What size is a number 7 drill bit?
A number 7 drill bit is 0.2010 inches. As a fraction, the 0.2010 decimal is 201/1000.
What do the numbers on drill bits mean?
The numbers indicate how easily the drill will “cam out”, or stop driving the bit. Lower numbers mean the drill will cam out with less torque, for example when you are driving a screw into something soft and you don’t want to overdrive it and strip the screw.
What size drill bit is M8?
Tap Size
| Tap Size | Drill Size |
|---|---|
| M6.3 x 1 | 5.5mm |
| M7 x 1 | 6.1mm |
| M8 x 1 | 7.1mm |
| M8 x 1.25 | 6.7mm |
What drill bit can I use instead of 3 8?
If it’s UNF 3/8 24TPI, you need 1/24″ smaller drill, which means a 0.3333″. 21/64″ would be slightly under, 11/32″ slightly over. A letter R drill would probably be “perfect”, a letter Q drill is about a thou under.