A standard dresser has between six and nine drawers, is around waist tall (26″ – 44″), is 36″ – 60″ wide, and is 16″ – 20″ deep. However, these can vary and you should choose an option that works best in your bedroom. To find the right dresser dimensions for you, decide where you’d like your dresser to go.
What is standard dresser drawer size?
The overall standard measurement of a dresser drawer is 60-inch wide, 20-inch deep, and 30-inch tall. Moreover, the drawer depth or height is not a complex thing. But the most common difference between a drawer and an opening is 3/4 inch.
How long is an average dresser?
The typical, rectangular dresser usually measures about 60 inches wide, 20 inches deep, and 30 inches tall. However, dresser dimensions vary quite a bit. Because waist-high can be a big difference between different people, dresser height can range from as low as 26 inches all the way up to 44 inches tall.
How do you list a dresser size?
The dimensions of this dresser are 30 inches by 16 inches by 36 inches. The first number is the width (W), the second number is the depth (D), and the third number is the height (H). Another way to write the same measurements would be: 30″W x 16″D x 36″H.
How are drawers measured?
Begin by measuring along the bottom floor of the drawer at the back edge, middle, and front edge. Check for variations across the height of the drawer as well. Take the smallest of these measurements. Repeat this step for the depth measurement on the left edge, middle, and right edge across the floor and the height.
How tall is a 3 drawer dresser?
The IKEA Brimnes 3-Drawer Chest is a medium height chest with an overall height of 37 3/8” (95 cm).
CONTINUE READING BELOW
How wide are chest of drawers?
Standard Sizes
Although there is no standard size for a chest of drawers, the most common size is 38 inches wide. A chest of drawers this size is small enough to fit in most bedrooms, but large enough to have ample storage space. The drawers are also small enough that they won’t buckle or sag over time.
How do I list furniture dimensions?
For most furniture pieces — and a myriad of other products on the market — the order of dimensions falls in this order: Length x Width x Height. Let’s say a customer is interested in buying an Artesia dining table from Broadway Furniture. It’s dimensions are 72 x 40 x 30 in.
How big is a bedside table?
The average measurements of a bedside table or nightstand are 20 inches in height, 20 inches in width, and 20 inches in depth. This provides more than enough room for a lamp, book, and clock. Some have shelving, drawers, or cabinets built-in.
What is the length of a triple dresser?
Elegant triple dresser is over 8 feet long, with modern, clean lines and a sleek look that will make your bedroom the envy of all the neighbors. Nine drawers to hold all your wardrobe essentials and then some.
How deep are standard dresser drawers?
A standard dresser has between six and nine drawers, is around waist tall (26″ – 44″), is 36″ – 60″ wide, and is 16″ – 20″ deep.
What sizes do drawer slides come in?
Shop by Drawer Slide Size Below
- 8-10″ Drawer Slides. 1-8″, 2-9″ and 9 versions of 10″ drawer slides from Hettich, Fulterer, and Hawthorne &, Reid. …
- 12″ Drawer Slides. …
- 14″ Drawer Slides. …
- 16″ Drawer Slides. …
- 18″ Drawer Slides. …
- 20″ Drawer Slides. …
- 22″ Drawer Slides. …
- 24″ Drawer Slides.
How do I choose a drawer slide size?
Measure the box, not the drawer front
Start at the back of the box and measure to the front of the box without including the face of the drawer. Once you have the length, round the number down. For example, if the drawer is 20 ½ inches long you will need to purchase 20 inch drawer slides.
How tall should drawers be?
Allow at least 1/4” of clearance above and below the drawer, giving you a height of 5-1/2” (6” minus 1/4” at top and 1/4” at bottom). Your drawer box should be 17” wide, 5-1/2” tall and 22” deep.
What are the dimensions of Ikea Hemnes dresser?
The IKEA Hemnes 8-Drawer Dresser has an overall height of 37.375” (95 cm), width of 63” (160 cm), and depth of 19.625” (50 cm).
How wide can a dresser drawer be?
Dresser drawers should be no more than 36 inches wide. Specifically, states Squidoo.com, a “standard size pine chest of drawers” is typically sized in either “17-inch width, 24-inch width, 30-inch width or 36-inch width” drawers.
What is furniture width?
Width (W): It is the total width of your piece of furniture in its widest part, including armrests. Height (H): It is the total height of your piece of furniture, measured from the floor and including pillows.
Is width the same as length in furniture?
Width (Side to Side): The distance or length of the item that’s touching or stretches across the wall. Depth (Back to Front): The distance or length it comes out from the wall and into the room. Height (Bottom to Top): The length starting from the floor and going to the top of the piece.
Are length and depth the same?
As nouns the difference between depth and length
is that depth is the vertical distance below a surface, the degree to which something is deep while length is the distance measured along the longest dimension of an object.
How tall is average bedside table?
It’s probably about 22.5-25.5 inches from the ground to the top of the mattress (25 inches is typical for most standard beds). Choose a nightstand that’s approximately 23.5 inches high for the perfect fit.
How many inches is a bed and nightstand?
Distance between bed and bedside table: 3 inches. Leaving just a little space between these two pieces prevents the furniture from looking crowded, yet keeps your bedside table within easy reaching distance of your lamp, alarm clock and tissue box.
How tall should a bedside table be?
General Rule
Consensus amidst professional décor experts as well as furniture craftsmen is that nightstands should be on average 24 inches tall upward to 36 inches. These numbers have become average as the general height of a mattress tends to be 25 inches.
How long is a 9 drawer dresser?
Charlie 9-Drawers White Dresser (39 in. H x 17 in. W x 59 in. D)
What makes a triple dresser?
a dresser having three drawers across for most of its height.
Whats the difference between a chest of drawers and a dresser?
A chest of drawers is specifically designed to be narrow in order to accommodate the storage needs of an individual living in a tight space. The second defining feature is that chests are significantly taller than dressers. … Dressers usually have 6 drawers (or more) and are bigger and deeper than chest drawers.
What size drawer slides for a 21 cabinet?
Most vanities have 16 or 18-inch drawer slides. Similar to a kitchen cabinet, and with the standard vanity top depth at 21-inches, you’ll find the finished depth of vanities mostly support a 16 or 18-inch drawer slide.
Can drawer slides be longer than drawer?
You should always use the longest slide possible for your application, without exceeding the drawer depth into the cabinet. The Height of a Drawer Slide is usually only a limiting factor, in the sense that you can’t install a slide that is taller than your drawer or pull-out.
How do you measure for cabinet drawers?
Measure the cabinet opening height (inside frame to frame) and subtract at least 1/2” from the opening height. If your cabinet opening measurement comes to 3 3/4″ then you need to round down to a 3 1/2″ drawer box. For depth, we recommend subtracting 1″ from the length of the side-mounted drawer glides.
Can you replace drawer slides?
The easiest way to install new drawer slides is to replace the old hardware with full ball bearing hardware. Usually, it takes too much work to modify the existing drawer boxes. Instead, you’ll want to order new drawer boxes.
Can you put drawer slides on old drawers?
In my opinion the best type of drawer slide to install and use is metal ball-bearing drawer slides. They are more durable and easier to install, making their higher price point well-worth it. Using a chisel and mallet remove the old wooden drawer slides from the inside of the dresser.
What is the difference between soft close and self close drawer slides?
The “self” element means that the hinge or slide has a built-in element that pulls the drawer or door closed, sometimes with a tap or bang. “Soft”-closing means just that it glides. The drawer or door is pushed and it glides to a certain point and then hydraulics take over.
How high should dresser drawers be?
Depth: Standard depths are 14-inches, 16-inches and 20-inches. Height: The height of the drawer refers to the height of the drawer face. The actual height of the box is usually less. Standard heights are 5-inches, 7.5-inches, 10-inches and 12-inches.
How wide can drawers be?
Standard non-custom kitchen cabinetry generally offers drawer widths from 12 inches to 24 inches, increasing by 3-inch increments. If the standard drawers available don’t fit into your kitchen design, you can order custom drawers from a cabinetmaker.