How do I know what size gas fireplace I need?
To calculate fireplace size, measure the width, length, and height of your room in inches. Multiply these three numbers together to determine the room’s volume, then multiply that number by four, which will give you a close minimum heat output. You can select an appropriate size with the original dimensions.
How many BTU do I need for a gas fireplace?
You can expect a standard gas fireplace to be around 30-40,000BTUs. A gas fireplace heat output might be shortened, to 30kBTU for 30,000BTU for example, for simplicity purposes. What is this? BTU is a standard measurement of heat, and is short for British Thermal Unit.
What is the standard size of a gas fireplace?
Standard Gas Fireplace Dimensions
Gas fireplaces can be anywhere from 20 inches to 60 inches, but the size of the gas fireplace you choose will ultimately depend on the area of the room and the height of the wall you plan to put it in.
How do I choose the right gas fireplace?
A gas fireplace’s heat output, in Btus, should match your room size, climate, and your house’s insulation level. Gas fireplaces have a wide range of heat output, from about 7,000 to 60,000 Btus. Use this formula to determine which models generate enough heat to warm your room.
Can a fireplace be too big?
Regardless of heat output or TV size, the size of the fireplace should suit the size of the room. A small fireplace will be lost in a large space. Likewise, a large fireplace could overpower a tiny room. However, we see clients going too small far more often than going too big.
How do you size a gas fireplace insert?
Helpful Tips:
- Measure the front opening of your fireplace.
- Measure the back width of your fireplace.
- Measure the depth of the floor from back wall to the front of your fireplace.
- Measure the inside height of the fireplace from the floor to the lowest point inside the fireplace.
How many square feet will 30000 BTUs heat?
For example, a 30,000 BTU space heater will heat 1,000 square feet in Florida, which is in hot climate. You can only heat 600 sq ft if you are living in cold climate. For most areas, 40,000 BTU will heat 800 square feet. But if you live in very south, it can heat more than 1,000 sq ft.
How many BTU should my fireplace be?
The number of BTUs a gas or wood fireplace can generate varies widely, depending on the size and model of the fireplace. Generally speaking, gas fireplaces can produce anywhere from 8,000-60,000 BTUs, and wood burning fireplaces range from 20,000-40,000 BTUs.
How many square feet will 32000 BTU heat?
How Many BTU To Cool 100 to 5,000 Sq Ft (Table)
| Square Footage | BTU Capacity |
|---|---|
| How many BTUs for 1300 square feet? | 26,000 BTU |
| How many BTUs for 1400 square feet? | 28,000 BTU |
| How many BTUs for1500 square feet? | 30,000 BTU |
| How many BTUs for 1600 square feet? | 32,000 BTU |
Do gas fireplaces come in different sizes?
Sizes vary. You’ll find units from about 30 to 48 inches wide and about 24 to 30 inches high. They are typically quite shallow –from 13 to 18 inches deep. Nearly all manufacturers make both top- and rear-venting models.
How wide are fireplace walls?
A 36″ or 42″ fireplace opening width is more common, but you need to assume about 18″ on each side for a typical non-combustible surround and wood mantel, 24″ on each side for something more grand.
What is the most realistic gas fireplace?
Peterson Real Fyre Gas Logs are the most realistic gas logs because they are meticulously hand-crafted to resemble natural wood and carefully designed and arranged to produce a flame that looks just like a real wood fire.
Is a gas fireplace worth it?
A gas fireplace offers a range of benefits over burning wood in your home, including the ability to instantly turn on, control and turn of the heat from the fire. The advantages of having gas fireplace can outweigh the disadvantages in many scenarios, making a gas fireplace a worthwhile investment for your home.
How do I know what type of fireplace I have?
You can generally identify these units by simply looking inside the fireplace itself. They will be constructed of sheet metal, and usually 1-3 walls made of a ceramic material with a brick or stone pattern. Some units will have louvred faces for a blower to be used, but most do not.
What size should a fireplace be?
The standard size of a fireplace is anywhere from 2 – 3 feet wide, 24 – 29 inches high, and always about 16 inches deep. Of course, the opening could vary depending on your style and design ideas, as well as where you are locating the fireplace.
How far away from a fireplace should a TV be?
The minimum distance between a fireplace and a TV is 20 inches with a mantel. Also, allow at least a 7-8 inch clearance from the top of the mantel to the TV. To avoid straining when watching TV, place the TV a maximum of 65 inches off the ground.
Is a bigger fireplace better?
The two main things that contribute to draft size are:
The reason that a taller chimney creates a better draft is really rather simple as the higher up in the atmosphere the chimney reaches, the greater the differential pressure.
What is difference between gas fireplace and gas insert?
Gas fireplaces are very similar to gas inserts. They are made the same way, with the box-within-a-box setup. However, the difference between gas fireplaces vs. gas inserts is that a built-in gas fireplace doesn’t require an existing fireplace or chimney.
How many square feet will 18000 Btu heat?
Calculating the number of BTUs needed to heat an area
For example, a 300 square foot room typically requires 7,000 BTUs to maintain a comfortable temperature, while a 1,000 square foot room requires 18,000 BTUs.
How many square feet will 35000 Btu heat?
BTUs Per Sq Ft
Example: With 35,000 BTU, you can heat a 1,000 sq ft home in Florida. If you’re from Chicago, a 35,000 BTU heater will adequately heat a 600 sq ft home. You can also check a similar BTU calculator for air conditioning here.
Is the higher the BTU better or worse?
More is not better. A unit with too many BTU’s, will cool the room fast, but leave the room humid. Too few BTU’s will never cool the room down and the unit will run incessantly. To be sure you’re making the right decision, call us to get answers about air conditioner sizes and efficiency.
How many BTU do I need for a 20×20 room?
Rule of thumb. A 1 ton (12,000 BTUH) unit is doable in the space you want to cool. To handle the hot, humid summer heat of your area, I would increase it to 15,000 – 16,000 BTUH.
What size BTU gas logs do I need?
The formula for calculating the maximum BTU allowed is: Room Width x Room Length x Ceiling Height x 20.
How many BTUs do I need for a 1200 square foot house?
A 1,200-square-foot home will require between 35,000 and 75,000 BTUs. A 1,500-square-foot home will require between 45,000 to 90,000 BTUs. A 1,800-square-foot home will require between 55,000 to 110,000 BTUs. A 2,100-square-foot home will require between 65,000 to 125,000 BTUs.
How many BTU is 600 square feet?
APPROXIMATE BTU OUTPUT NEEDED BY SQUARE FOOTAGE
| APPROX. SQ.FT. | RECOMMENDED INSULATION |
|---|---|
| Up to 400 | 8,000 BTU |
| Up to 600 | 12,000 BTU |
| Up to 800 | 16,000 BTU |
| Up to 1000 | 20,000 BTU |
How do I calculate BTU for a room?
Of course, BTU is not just calculated by the desired temperature, but also takes into account room size.
…
Calculating the BTU for your room.
| Room | Multiplication Factor |
|---|---|
| Bedrooms | Multiply Cubic Feet by 4 |
| Common Areas and Kitchens | Multiply Cubic Feet by 3 |
| For Rooms Facing North | Add 15% |
| For French Windows | Add 20% |
What is millivolt ignition?
Millivolt ignition systems use a standing pilot light. This type of ignition system does not require any external power. Millivolt ignitions are also remote ready and can accommodate anything from a simple on/off wall switch to a programable thermostatic remote.
Do you need glass in front of a gas fireplace?
Direct vent fireplaces are sealed combustion systems and need the glass on to function properly. We sell optional screen mesh panels that go on the front of the glass that takes away any reflection, and adds an additional safety barrier against accidental contact with the hot glass panel.
How wide is a normal fireplace?
Most fireplaces are 42 inches wide, while some smaller fireplaces can have as little as a width of 36 inches. Some somewhat bigger fireplaces can even be 48 inches wide. With the height, generally, a mantle should at least be 12 inches above the opening.
How much space do you need around a fireplace?
The National Fire Code requires all combustible material to be at least 6 inches from the opening of the firebox. For every 1/8 inch of protruding combustible material, you must account for an additional inch of clearance.
Are Duraflame logs worth it?
The manufacturers claim that burning firelogs produces 80 percent fewer fine particles and 75 percent less carbon monoxide, and independent studies (PDF) verify these claims. However, firelogs don’t produce as much of one of the most beneficial byproducts of burning wood: heat.
Which is better vented or non vented gas logs?
Ventless fireplaces are more energy efficient than vented fireplaces because no heat escapes up the flue, so you’ll save money on gas utility bills. A vented gas fireplace uses more gas to create the same level of warmth because some of its heat escapes through the flue.
Can you use Duraflame logs in gas fireplace?
Can I use Duraflame logs in my gas fireplace? No, using Duraflame logs in a gas fireplace is not safe and can cause damage to your fireplace. Only use the type of fuel that is recommended for your fireplace.
Do gas fireplaces add value to a home?
Return on Investment
A homeowner can often recover over 100 percent of the expenses associated with adding a fireplace upon selling their home. According to the National Association of Real Estate Appraisers, adding a fireplace to home can increase the resale value of the home by as much as 6-12 percent.
How expensive is it to put in a gas fireplace?
Installation and Labor Costs
Gas fireplace inserts are installed in pre-existing, wood-burning fireplaces, making the overall cost far lower than installing an entirely new system. The insert itself will cost around $1,200, with labor costs running between $500 and $3,500 depending on the complexity of the job.
Is it cheaper to run your gas fireplace or furnace?
A modern furnace is more efficient in turning gas into heat than a gas fireplace. This means that although a furnace costs more to run per hour than a gas fireplace, it turns more of that energy into heat and can warm a whole house rather than a single room.