For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.
How do I know what size pool pump I need?
Sizing the Pump for Your Swimming Pool
- Circular Pools: Diameter (ft.) x Diameter (ft.) x Average Depth (ft.) x 5.9 = Total pool capacity in gallons.
- Oval Pools: Length (ft.) x Width (ft.) x Average Depth (ft.) x 6.7 = Total pool capacity in gallons.
- Rectangular Pools: Length (ft.) x Width (ft.) x Average Depth (ft.)
How do you size an above ground pool pump?
How To: Select Above Ground Pool Pumps – YouTube
How many gallons is a round 24 foot pool?
How To: Select Above Ground Pool Pumps – YouTube
Can I use any pump for my above ground pool?
Sure you can, as long as the pump is at or below the pool water level, and you have a very small pool. If the pump is able to turnover all of the water in 8-10 hours, and is able to reach (but not exceed) the pool filter Design Flow Rate, the intended use of the pump (a/g or i/g) really doesn’t matter.
Is 1 HP pool pump enough?
Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.
Can I replace my 1hp pool pump with a 1.5 HP?
You cannot replace a 1.0 full rated motor with a 1.0 uprated motor. However, you can replace your 1.0 Full rated motor with a 1.5 HP uprated motor. This is because they both will have the same total horsepower.
How far should pump be from above ground pool?
If circumstances allow, stay close to the pool. Shorter pipe runs = less work for the pump which extends the life of the pump and uses less electricity. Our projects typically average a distance of 20–40 feet from the pool to the equipment, but as stated earlier, much longer runs are sometimes required.
How many gpm does a 1.5 HP pump?
1.5 hp is 48,500 ft lbs per minute, a gallon of water weighs either 8.34 US or 10.02 UK lbs if the pipes are 100 ft long and put some resistance to flow you are looking in the range of 10–25 gpm.
How many gallons per hour does a 1 HP pool pump?
You can see from the chart that a 1 horsepower pump will give you 52 gallons per minute on a system with 64 feet of head. We want to give you the flow information on each pump so that you can come up with the right pump the first time.
How long does it take to fill up a 24 ft pool?
The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity.
How many gallons does a 24?
How Many Gallons Of Water Are In My Swimming Pool?
| SIZE | GALLONS OF WATER |
|---|---|
| 15′ Round | 5,310 |
| 18′ Round | 7,646 |
| 21′ Round | 10,407 |
| 24′ Round | 13,593 |
How many gallons in a 24 foot round pool 52 inches deep?
Approximate Water Capacity – 13,500 Gallons.
Can I buy a bigger pump for my pool?
Larger pumps make it easier to efficiently vacuum the pool or run an automatic above ground pool cleaner. Greater circulation helps distribute chlorine throughout the pool, keeping the pool clean and algae-free. Larger pumps may not need to run as long each day to circulate the water.
Will Bestway pump work with Intex pool?
An Excellent Pool Filter!
I currently have the Intex Krystal Clear Pool Filter Cartridge Pump paired up with a Bestway Swimming Pool and it works perfectly. The filter that came with the Bestway pool (800+ gallons) was underwhelming and the water would not turn over enough to keep the pool clean.
Where should I put my above ground pool pump?
Where Should I Locate My Pool Filter System? – YouTube
Can I replace a 3/4 HP pool pump with a 1 HP pump?
Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.
What happens if you oversize a pool pump?
A pool pump that is larger than needed has a more powerful motor and circulates water at a higher flow rate. This uses significantly more energy to pump the same amount of water and puts additional stress on your pipes and filter, meaning you’ll need to replace them sooner.
Can a pool pump be too powerful?
Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly. Another possible consequence is pump cavitation in which bubbles form in the water inside the pump and then burst with great force, resulting in damage to the impeller and other internal parts.
What is the difference between 0.5 HP and 1hp water pump?
For example if an 0.5 HP motor with discharge rate of 200 litres per hour takes 2 hours to lift the water, then an 1 HP pump with higher discharge rate 400 litres per hour can complete the task in less than 1 hour.
What is the difference between 1hp and 1.5 HP motor?
So, on low speed the 1 HP moves 43 GPM and the 1.5 HP moves 45.5 GPM. To save money you want to hopefully run it on low speed (much less electrical current is used on low speed and it’s more quiet). For me, with my Hayward EC40 filter, low speed with the 1 HP works great because the filter is designed for 40 GPM.
How many HP does a pool pump need?
Water pumps of 1, 1.5, and 2 horsepower are very common — and for the average size pool, very oversized.
How far does pool equipment have to be from house?
There is a national standard that requires that all swimming pools must be at least 10 feet away from the house walls. As mentioned, this will protect electrical wiring from leaks, floods, and splashes.
How far does the filter have to be from above ground pool?
The filter should be able to connect to all the necessary pool water lines and be no more than six feet above the pool’s water level. The location should be easily accessible for future cleaning and maintenance.
Does pool pump need to be below water level?
Slightly below grade is an optimal position for a pump to be. I notice that flooded suction pumps tend to last much longer than ones that have to pull up to prime.
What HP pump do I need?
Example – Horsepower Required to Pump Water
| Power Required to Pump Water (hp) | ||
|---|---|---|
| Volume Flow (gpm) | Height (ft) | |
| 10 | 0.0126 | 0.0758 |
| 15 | 0.0189 | 0.114 |
| 20 | 0.0253 | 0.152 |
How many gpm does a 2 HP pool pump?
The maximum flow into the pump will be 73 gallons per minute for each intake line. The maximum flow into the pump is 42 gallons per minute for each 1.5 inch intake line.
How many gpm does a 2 HP pump?
Number of submersible well pump stages determine pump lift capacity
| Table of Submersible Pump Stages vs HP vs Total Dynamic Head vs. GPM Flow Rate Capacity | ||
|---|---|---|
| Water Pump HP | Nr. of Pump Stages | GPM Flow Rate Capacity |
| 1 1/2 HP | 11 | 4 – 40 GPM (varies by TDH) |
| 2 HP | 14 | 4 – 42 GPM (varies by TDH) |
| 3 HP | 19 | 4 – 43 GPM (varies by TDH) |
How many GPM will a 3/4 HP pump?
The volume the pump moves is dependent on the type of pump it is there are 3/4 horsepower pumps that pump 10 gallons of water a minute there are three 3/4 horsepower pumps that pump 31 gallons of water a minute.
How many gallons per minute does a 3/4 HP pump?
Shallow Well Jet Pump System, 3/4 hp, 13/6.5 Amps, 9.6 gpm Flow Rate @ 10 Ft. Lift @ 40 PSI. Country of Origin USA.
What is the capacity of 1.5 hp submersible pump?
Product Specification
| Motor Horsepower | 1.5 Hp |
|---|---|
| Motor Phase | Single Phase |
| Discharge Outlet Size | 50 mm or 2 inch |
| Capacity | 15 to 50 m |
| Maximum Discharge Flow | 100 – 500 LPM |
What is the cheapest way to fill a pool with water?
The cheapest way to fill a pool is with your hose.
Will 2 hoses fill a pool faster than 1?
Splitting that into two lines will not likely double the flow rate as there is a pressure drop, but it should increase the total flow rate considerably.
How long does it take to fill a 24 ft pool with a garden hose?
How Long Does It Take To Fill A Pool? – YouTube
What size is a 10000 gallon pool?
Common Pool Sizes and Its Capacity In Gallons
| Pool Size | US Gallons |
|---|---|
| 12 ft x24 ft Oval | 6,400 |
| 15 ft x24 ft Oval | 8,000 |
| 15 ft x 30 ft Oval | 10,000 |
| 18 ft x 33 ft Oval | 13,000 |
How many gallons is a 12×12 pool?
Above Ground Pools with a Depth of 48″ (4′)
| SIZE | GALLONS OF WATER |
|---|---|
| 12′ Round | 3,398 |
| 15′ Round | 5,310 |
| 18′ Round | 7,646 |
| 21′ Round | 10,407 |
How do I figure out how many gallons My pool is?
Length x width x average depth x 7.5 = volume (in gallons)
Length times width gives the surface area of the pool. Multiplying that by the average depth gives the volume in cubic meters. If you’d like to find the pool volume in gallons, multiply your results by 7.5, as there are 7.5 gallons for each cubic foot.
How many gallons is a 15×30 pool?
Length x width x average depth x 7.5 = volume (in gallons)
Length times width gives the surface area of the pool. Multiplying that by the average depth gives the volume in cubic meters. If you’d like to find the pool volume in gallons, multiply your results by 7.5, as there are 7.5 gallons for each cubic foot.
How many gallons is Olympic swimming pool?
It turns out that Olympic swimming pools have some pretty specific dimensions. They are 50 meters long, 25 meters wide, and 2 meters deep. In terms of volume, when full, these pools hold 2.5 million liters of water or about 660,000 gallons.
How much baking soda do I add to my pool?
A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool’s pH tested below 7.2, add 3-4 pounds of baking soda. If you’re new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.
What size pump do I need?
Minimum Pump Size
Water needs to circulate through the filter at least once every 2 hours. This means that if you have a 1,000-gallon pond, you need a pump that can produce at least 500 gallons per hour or GPH. If you have fish, then it is best to double the pump’s capacity to ensure that your water stays clean.
What size pool pump do I need for a 25000 gallon pool?
Calculate Flow Rate and Turnover
Flow rate is the number of gallons the pump moves per minute, and turnover is the minimum about of time to circulate all water through the filter. Your 25,000-gallon pool needs an output of 52 gallons per minute to circulate the water once every eight hours.
What size filter do I need for a 10000 gallon pool?
Filter Size
A helpful rule of thumb is to choose a filter with at least 1 square foot per 10,000 gallons pool capacity.