Six Point Standard Sockets (5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16) Six Point Metric Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) Six Point Metric Deep Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Hex Bit Standard Sockets (5/32, 3/16, 7/32, 1/4, 5/16, 3/8)
What are socket sizes in order?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).
What are the 3 types of sockets?
Three types of sockets are supported:
- Stream sockets allow processes to communicate using TCP. A stream socket provides bidirectional, reliable, sequenced, and unduplicated flow of data with no record boundaries. …
- Datagram sockets allow processes to use UDP to communicate. …
- Raw sockets provide access to ICMP.
What are the most common sizes of standard sockets?
Socket sizes are measured based on imperial system inches and fractions. Some of the commonly used SAE sizes are 3/8 in., 5/8 in., and 11/16 in. sockets.
What size is a 33mm socket in standard?
A 33mm metric socket is 1.29921 inches in size which most closely matches a 1 5/16 standard size socket.
What is a 21mm socket in standard?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 7/16″ | 16mm | 5/8″ |
| 1/2″ | 19mm | 3/4″ |
| 9/16″ | 21mm | 13/16″ |
| 22mm | 7/8″ |
What’s better 12 point or 6 point sockets?
Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.
Which type of sockets are most commonly used?
Hex sockets are the most common type of socket and come in two main types: hex/6 point sockets and bi-hex/12 point sockets.
What size socket wrench should I buy?
While 12-point sockets are fine for most light work, choose six-point sockets for larger hardware or applications that demand serious torque. Six-point sockets are less likely to slip in this situation.
How many different types of sockets are there?
There are two main types of sockets: impact and hand.
How do I know my socket size?
Socket set sizes
- The size of the drive socket (the part that attaches to the socket wrench). These are always given in imperial measurements, and will usually be either 1/4″, 3/8″, 1/2″, 3/4″ or 1″.
- The size of the socket head (the part that fits over or into a fastener).
What are the types of sockets?
Top 10 Types of Sockets
- Stream Sockets. These sockets are used on the delivery side of the network environment. …
- Datagram Sockets. The implementation doesn’t give any guaranteed delivery as they work connectionless. …
- Raw Sockets. …
- Packet Sequenced Sockets. …
- Hex Sockets. …
- Socket Bit. …
- Impact Sockets. …
- Spark Plug Sockets.
What is 36mm in standard?
Wrench Size And Conversion Table
| Inches | Millimeters | Spanner |
|---|---|---|
| 1.417 | 36mm | 36mm |
| 1.418 | 1 7/16 AF | |
| 1.480 | 7/8 Wworth, 1in BSF | |
| 1.500 | 1 1/2 AF |
What is 33mm in SAE?
SAE to metric wrench or spanner converting chart.
| Standard SAE US Wrench/Spanner Size (inches) | Metric Wrench/Spanner Size (mm) |
|---|---|
| 1 1/4 | 31.75 |
| 32 | |
| 33 | |
| 1 5/16 | 33.34 |
Is there a 33 mm socket?
33 mm – Impact Sockets – Ratchets &, Sockets – The Home Depot.
Is 7/8 the same as 21mm?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch.
What is a 10mm socket used for?
It is a extremely used size. People use it and don’t put it back. Disappears like 1/4″ nut drivers and 7/16″ open end wrenches. For those of you who are non mechanically oriented, the 10 mm socket is probably the most used, most popular metric sized socket around for many medium sized nuts and bolts.
Are 13/16 and 21 mm the same?
21 mm is . 826″, 13/16 is . 812″ . If you are getting a 13/16 socket on those, it’s a pretty sloppy socket.
Why are impact sockets black?
Impact sockets are typically black. This is because the surface is carbonized in order for it to harden. Ensuring that the surface is hard allows the sockets to absorb sudden torque changes i.e. “impact” a lot better.
What are 8 point sockets called?
8-Point &, 4-Point Sockets Overview &, Discussion – YouTube
Can you use a regular socket on an impact wrench?
Impact sockets can be used safely on a hand tool, however you should never use a regular hand tool socket on an impact wrench as this can be extremely dangerous. A regular socket is likely to shatter when used on power tools due to their thinner wall design and the material they’re made from.
What are the two types of sockets?
Sockets come in two basic types—connection-oriented and connectionless. These terms refer to types of protocols.
What sockets do mechanics use?
⅜” drive sockets are the most practical sockets for most automotive jobs. If you can only pick one drive socket set — you want a ⅜” drive set. However, these still won’t let you complete any job. ½” drive socket sets are the largest drive sockets that most mechanics need.
What is a good socket set?
The Best Socket Sets of 2022
- Stanley 3/8 in. and 1/4 in. …
- Best Overall. Sunex Tools 3/8 Inch Drive Impact Socket Set 51-Piece.
- Best Value. WORKPRO 39-Piece Socket Set.
- Upgrade Pick. Sunex 3580, 3/8 Inch Drive Master Impact Socket Set.
- Best for Spark Plugs. …
- Best for Mechanics. …
- Best Torx Bit Set. …
- Best Complete Set.
Whats bigger 3/8 or 1/2 socket?
3/8 is the smaller version ratchet, and 1/2 is the larger version ratchet.
Whats bigger 3/8 or 1/4 socket?
You will note that a 1/4″ socket set will usually have up to a 1/2″ or 9/16″ socket. 3/8″ drive will usually go to 3/4″, and sometimes to an inch. 1/2″ drive sockets can start at about 1/4″ in some cases and range up to well over an inch.
Is Universal A type of socket?
“Universal” or “multi-standard” sockets are intended to accommodate plugs of various types. In some jurisdictions, they violate safety standards for sockets.
How are 12 sockets measured?
In the current market, socket sizes are divided into two systems: SAE (imperial, measured in inches) and metric (measured in millimeters). Both 6-point and 12-point sockets are measured using these two systems. The popular range is 5.5~24mm.
What size bolt fits a 13mm socket?
A 5/16 bolt is what your looking for. A 13mm socket and 1/2” socket are almost identical.
What are metric sockets?
Metric sockets and wrenches use the metric measurement system. This is when millimeters are used to describe the size. So you’d get a 20mm wrench in the metric unit of measurement. … Both the SAE and metric fasteners have six-sided heads that are turned using open-end, boxed or socket wrenches.
What are the different types of motherboard sockets?
There are different types of sockets: pin grid array (PGA), which has even rows of holes around a square socket, staggered pin grid array (SPGA), which has staggered holes so more pins can be inserted, plastic pin grid array (PPGA), micro pin grid array (µPGA), flip chip ball grid array (FCBGA), and land grid array ( …
Is socket and port the same?
A port is a logical construct assigned to network processes so that they can be identified within the system. A socket is a combination of port and IP address. An incoming packet has a port number which is used to identify the process that needs to consume the packet.
What is socket with example?
Definition: A socket is one endpoint of a two-way communication link between two programs running on the network. A socket is bound to a port number so that the TCP layer can identify the application that data is destined to be sent to. An endpoint is a combination of an IP address and a port number.
What is a 17mm in standard?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 16mm | 0.63 | |
| 21/32″ | 0.656 | |
| 17mm | 0.669 | |
| 11/16″ | 0.688 |
Is there a 20mm socket?
Your toolbox isn’t complete without the 3/8-in Drive 20mm 6 Point Metric Shallow Socket. This Socket comes with large size markings and a rust resistant coating.
What SAE and metric sizes are the same?
While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.