What size wrench fits a 20mm bolt?

Metric Bolt Head/Wrench Size

Bolt Diameter (mm) Head/Wrench Size (mm)
ANSI/ISO DIN/ISO Heavy Hex
16 24 27
18
20 30 34/32*

What size socket do I need for 20mm bolt?

Size Chart

Bolt size Size Tolerance
3/8″BSW 18.08
M12 19mm 19.06
1/2″UNF 3/4″ 19.11
20mm 20.06

What size is a 20mm bolt?

Metric Hex Bolt Dimensions

NOMINAL SIZE (D) BODY DIAMETER
m14 14.00 13.73
m16 16.00 15.73
m20 20.00 19.67
m24 24.00 23.67

What size bolt has a 20mm head?

Metric Shoulder Bolt Dimensions

Shoulder Diameter (A) Thread (C) Head Diameter (E)
10mm 8mm x 1.25 16mm
12mm 10mm x 1.5 18mm
16mm 12mm x 1.75 24mm
20mm 16mm x 2.0 30mm

How do I know what size wrench to get?

Take the diameter of the bolt, and multiply by 1.5. This calculation and conversion factor is valid for either metric or standard bolt sizes. The resulting number will be the size of the wrench you need to adjust the bolt properly. For example, If your bolt measures .

What size socket fits a 22mm nut?

SAE to Metric Conversion Chart

SAE Size Metric Size Inches Decimal
22mm 0.866
7/8″ 0.875
23mm 0.906
29/32″ 0.906

What size bolt has a 22mm head?

Metric Bolt Head/Wrench Size

Bolt Diameter (mm) Head/Wrench Size (mm)
ANSI/ISO DIN
10 16 17
12 18 19
14 21 22

What is M3 screw size?

ISO Metric Machine Screw Thread Dimensions

Thread Size Nominal Diameter (mm) Thread Pitch (mm)
M2.5 2.5 0.45
M3 3.0 0.50
M3.5 3.5 0.60
M4 4.0 0.70

What size is a M8 screw?

Metric clearance and tapping drill hole sizes.

Size Clearance Hole mm Tapping Drill (std Pitch)
M5 5.5 4.2 mm
M6 6.5 5.0 mm
M8 9 6.75 mm
M10 11 8.5 mm

What size thread is a 30mm nut?

Coarse Thread Bolts

NOM. DIA. PITCH mm NUT Size
M22 2.5 32
M24 3 36
M27 3 41
M30 3.5 46

What size bolt has a 30mm head?

Metric Hex Bolt Dimensions

NOMINAL SIZE (D) BODY DIAMETER HEAD THICKNESS
m20 20.00 12.88
m24 24.00 15.44
m30 30.00 19.48
m36 36.00 23.38

What size metric bolt has a 10 mm head?

The standard 6mm cap screw has a 10mm head.

How can you tell if a bolt is metric?

Metric fasteners are specified with a thread pitch instead of a thread count. The thread pitch is the distance between threads expressed in millimetres (measured along the length of the fastener). For example a thread pitch of 1.5 means that the distance between one thread and the next is 1.5mm.

How do I know what size nut to buy?

If the nut is metric, count the number of lines on the tape measure to find the measurement. If you count 9 lines, the size is a 9-mm (millimeter) nut. If the nut is US standard, count the smallest lines on the tape measure in sixteenths. Add the sixteenths together to find the size.

What are the standard wrench sizes?

Wrenches: Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes.

Are wrenches oversized?

Wrenches are made with openings that are slightly larger than the nuts or bolts they are designed to fit (typically, the clearance is a few thousandths of an inch). … Box-end and open-end wrenches are both sold with different-sized wrenches at either end of individual tools.

What is equivalent to 22mm socket?

Metric / Standard Wrench Conversion Chart

Bolt Diameter Metric Standard
22mm 7/8″
5/8″ 24mm 15/16″
25mm 1″
3/4″ 29mm 1-1/8″

How are nut sizes measured UK?

Bolt and nut measurement – YouTube

What size socket do you need for lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind, the most common socket sizes for lug nuts are 17mm, 19mm, 21mm, and 23mm. These four sizes will generally cover 95% of your needs so make sure that the lug wrench you buy has them.

What size is M12 bolt in MM?

The two threads most commonly found in plant and machinery are commonly known as ‘standard’ and ‘fine’ pitch. The pitch of a thread is the distance between two adjacent threads and is measured in millimetres.

Spanner and Allen Key Sizes.

Size Spanner Allen Key
M8 13 mm 6 mm
M10 17 mm 8 mm
M12 19 mm 10 mm
M16 24 mm 14 mm

What is M20 bolt?

M10-1.0 x 20

M = This designates the fastener is a metric size. 10 = The nominal diameter in millimeters. 1.0 = The thread pitch, or distance between threads, in millimeters. 20 = The fastener’s length, in millimeters.

What size nut is M8?

M8 Hexagon Nuts (DIN 934) – Marine Stainless Steel (A4) Technical Specification

Finish Natural
Nut Width A/F (J) 13mm
Nut Width A/P (P) 14.95mm
Thread Pitch 1.25mm
Thread Size M8 (8mm)

Is M3 screw 3mm?

M3 (3mm) Thread Size (T)

What does M2 screw mean?

M2 screws are typically used in the manufacture of small items of electrical equipment, laptops, cameras and mobile phones. The “M” designation for metric screws indicates the outer diameter of the screw in millimetres, so for an M2 screw, the outer diameter is 2mm.

What is diameter of M2 screw?

Thread Geometry – Metric Coarse

Thread Major Diameter Pitch
M1.6 1.6 0.35
M1.8 1.8 0.35
M2 2.0 0.40
M2.2 2.2 0.45

Is an M8 bolt 8mm wide?

But, to answer your Q – an M8 bolt will fit in an 8mm hole.

Is M8 same as 8mm?

M8 is not exactly 8mm but it is sufficient from a non-engineering point of view as long as the thread pitch is correct. Luckily, most commonly available metric bolts have the same pitch. Regarding tolerance for common uses it can also often be ignored.

What does M8-1.25 mean?

For metric fasteners, you will see a M8 x 1.25 or an M8 x 1. For thread pitch, the distance between two points is the second number meaning the higher the number the fewer threads there are. This means the M8 x 1.25 is the coarse threading and the M8 x 1 is the fine thread.

What size bolt does a 10mm nut fit?

What bolt size fits a 10mm nut? – Quora. Assuming you mean a 10 mm thread, then it will be 15 or 16 mm across the flats, depending on the standard it is made to.

What size bolt fits a 19mm spanner?

Metric Spanner Sizes

Nominal Size Spanner Size
M7 11mm
M8 13mm
M10 17mm
M12 19mm

What size nut is 10mm?

Metric Spanner Sizes

Nominal Size Spanner Size
M7 11mm
M8 13mm
M10 17mm
M12 19mm

What does 8.8 mean on a bolt?

The two figures indicate the tensile and yield strengths of the bolt or screw. In the case of a 8.8 grade bolt the first figure signifies that the Tensile Strength is at least 800MPa. The second figure signifies that the fastener will begin to yield at 80% of the Ultimate Tensile Strength, i.e. at least 640MPa.

Is M10 a 10mm bolt?

M10 (10mm) Thread Size (T) 6.6mm Head Length (H)

What size nut takes a 15mm wrench?

I believe that the bold that goes with the 15mm wrench is normally an M8. M8s usually use 12 or 13mm heads.

How do you measure metric threads?

Metric thread sizes are specified by diameter and pitch, which is the space between threads. For the size M6 × 1 mm, the pitch is coarse, while the size M6 × 0.75 mm has a fine pitch. If you don’t know the pitch, choose coarse threads, they’re the industry standard.

Can you use standard sockets on metric bolts?

Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.

How do I know what size nut I need for a bolt?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

What size wrench fits a 1/2 bolt?

US Bolt Head/Wrench Size

Bolt Diameter Head and Wrench Size
Hex Bolt – Lag Bolt – Square Bolt Heavy Hex Bolt
1/2″ 3/4″ 7/8″
9/16″ 13/16″
5/8″ 15/16″ 1-1/16″

What size bolt takes a 1/2 wrench?

Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt.

US Bolts
Bolt Diameter (in) Head and Wrench Size (in)
7/16 5/8
1/2 3/4 7/8
9/16 13/16

How do you measure a bolt head for a wrench?

Tip

  1. Insert the shank of the bolt into the holes in a bolt-sizing gauge. …
  2. Locate the printed bolt size to the side of the correct hole on the gauge (for example, 1/2, 3/4 or in mm for metric bolts).
  3. Locate the socket head in the socket set that has this size printed on its side.
Exit mobile version