If your ice maker isn’t producing ice at all or is producing crescents or cubes that are smaller than usual, it’s typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
How do I reset my GE ice maker?
Locate the shut-off switch on the front of the GE refrigerator ice maker and turn the switch off, leaving it off for at least 30 seconds. Turn the switch back on and locate the feeler arm on the ice maker. Push the feeler arm up three times quickly to reset the ice maker.
Why is my GE icemaker not making ice?
If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi.
Where is the reset button on GE ice maker?
| Ice Maker Brand | Where to Find the Reset Button |
|---|---|
| Frigidaire | The reset button is on the front of the ice maker, under the motor housing, past the front cover |
| GE | Some GE ice makers do not have a reset button. To reset one, try turning the ice maker off at the power source. |
How do I troubleshoot my GE ice maker?
Compartment. Check that the icemaker switch is in the on position. The green light should appear
What do you do when your ice maker stops making ice?
Fix: Start by making sure all electrical connections are properly seated. Slide the refrigerator out from the wall, turn off the water supply valve and disconnect it from power. Locate the quick release plug on the back wall inside the freezer. Unplug the connection it and reconnect it to ensure it’s fully connected.
Is there a reset button on ice maker?
Look for the Reset Button
To access it, you must first remove the ice tray. Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker, push this button in and hold it for 10 seconds.
How do I get my GE refrigerator to make ice?
However. If you have a cafe model you must first select settings. On the touch screen then navigate
How do you unfreeze a GE ice maker?
- Unplug the refrigerator and remove any ice from the ice maker and the ice tray. …
- Locate the water refill tube that runs to the ice maker. …
- Turn a hair dryer on low speed and point it at the refill tube to defrost. …
- Replace the metal clip and the ice tray before plugging in the refrigerator.
How do you reset the ice maker on a GE French door refrigerator?
This arm, also called a feeler, is what tells the unit to stop producing ice when it comes into contact with ice cubes. Restore power to the ice maker. Next, push up on the arm or feeler three times. This will reset the unit.
How do I know if my ice maker is bad?
If the ice maker makes cubes and kicks them into the bucket – the water inlet valve is bad. If there are no new cubes in the bucket – the ice maker is bad.
Can water filter cause ice maker not to work?
While a clogged water filter could be the cause of your ice maker not working, there are more common causes. … If there is ice blocking it, then the ice maker will get the message it should not be producing more ice. Check the water supply to make sure it is going from the fridge to your freezer.