- Turn them both on at the same time, holding down the buttons until they flash red then blue.
- Once they both are flashing at the same time, you’ll double press a button on ONE earbud.
- The earbud will say it’s connected.
How do you pair left and right earbuds?
Take the left and right earbuds out the case and long press the touch control area at the same time for about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.
Why is only one of my wireless earbuds connecting?
Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds. … The voice levels must be equal on both sides of your headset.
Why can I only hear out of one Bluetooth earbud?
Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings. You’ll see a slider displaying left and right.
Can’t connect both earbuds?
Step 1: While the headphones are charging (the white LED indicator of earbuds is on), double-press the power keys of both sides to reset the headphones. Remove both the headphones from charging case, then both headphones power on automatically and connect each other within 60 seconds.
How do you fix wireless Bluetooth earbuds when only one side works?
- Check the side balance.
- Check Your Track Mono Or Stereo.
- Power off/on your headphone.
- Reconnect Bluetooth.
- Insert the sound cable plug while playing audio.
- Pull out back the sound cable while playing audio.
- Reset your wireless headphone.
How do you pair both push earbuds?
- Place the buds back in the case until both LED’s show red, and then pull them back out.
- Both buds will automatically power ON and the LED’s will simultaneously flash BLUE while they sync to each other.
How do you fix earbuds with one side?
- Straighten out the earphone cord.
- Try another pair of earphones.
- Clean the headphone jack.
- Restart the device.
- Check the device audio settings.
- Check for the earphone damaged wires.
How do you get both wireless headphones to work?
You need to press the soft touch panel on each earbud at the same time so they sync first, then turn on your devices Bluetooth and select connect (ignoring the mono option) and vola stereo sound!
Can you use both earbuds at the same time?
Take them out of the cradle. Hold down on both until they turn on, they should be flashing. Now turn on your cellphone and Bluetooth. You should now hopefully only see one enacfire Bluetooth device and both ear buds should now be paired together as one.
How do I fix my left earbud?
- Jack not inserted properly. …
- Check your sound balance in device settings. …
- Mono sound setting. …
- Dirty Earbuds. …
- Inspect the wires for damage. …
- Problem with the device headphone slot. …
- Check for signs of water damage. …
- Re-pairing wireless headphones.
How do you reset wireless earbuds?
So once the earbuds are powered off press and hold the button on each earbud again for eight seconds