How to choose the right size kitchen faucet?

If you have windows or cabinets above your sink, measure upward from the center mounting hole to find the maximum overall height and ensure your new faucet can fit comfortably underneath. To find the ideal spout reach, measure from the center mounting hole forward to the center of your sink.

How do I choose a kitchen faucet size?

First, you need to address size as it relates to functionality. Second, to look balanced, your faucet should be in proportion to the sink. A large faucet would visually overpower a small prep sink, while a small faucet might look odd in a large sink and countertop area.

How do I know what size faucet I need?

If the distance is six inches or more you need a “widespread” or “eight inch spread” faucet. If the measurement is less than six inches you need a “centerset,” “mini-spread” or a “four inch spread faucet.” Each of these configurations is for a faucet that will use all three holes in the sink.

What size is a standard kitchen faucet?

After researching, I wrote this article to share my findings with you. What are the standard faucet hole sizes for kitchens and bathrooms? The standard faucet hole sizes for kitchens and bathrooms are 1 3/8″ (1.375 Inches or 34.925 mm) in diameter unless otherwise mentioned in the specification.

What does 8 inch spread faucet mean?

On an 8″ spread there will be 8″ from the center of the hot faucet to the center of the cold faucet. Like this: A 4″ or mini spread will be quite close together and make it difficult to clean around the handles and spout.

How do you measure a faucet for the kitchen sink?

To determine if you need a center set or widespread lavatory faucet measure the distance between the

What is standard faucet spacing?

Typically, faucet holes vary from one to four, with the fourth hole serving as a place for a soap dispenser. For standard hole spacing, four inches is the required space for a center set faucet. But some faucet types, like widespread faucets, require a different spacing measurement.

How far should faucet hole be from sink?

The distance between the faucet body (where the water enters the faucet) and the areator is usually 8 to 10 inches for a kitchen faucet. However some oversized faucets have a reach of 11 to 16 inch.

Are all kitchen faucet holes the same size?

While not all faucets are the same, the standard sink faucet hole size is 1 3/8 inches. For some, a 1 1/2-inch hole may be required. If the faucet is a three or four-hole faucet, you’ll need holes 6 or 8 inches across your kitchen sink.

Which kitchen faucet is best?

• BEST OVERALL: Delta Faucet Leland Touch Kitchen Sink Faucet.
• BEST BANG FOR THE BUCK: WEWE Single Handle High Arc Pull Out Kitchen Faucet.
• BEST PULLDOWN: Moen Arbor One-Handle Pulldown Kitchen Faucet.
• BEST TOUCHLESS: Kohler Simplice Response Touchless Kitchen Faucet.
• BEST VOICE-ACTIVATED: Delta Faucet Trinsic VoiceIQ Faucet.

What is the difference between a 4-inch and 8 inch faucet?

The 4” is the measure of the distance between its handles. Meanwhile, the 8 inch faucet configuration or widespread faucets come in a set of three individual pieces. They have handles for both a cold and heated water supply.

Can you use 8 inch 4-inch faucet?

The Distance Between the Outer Holes

But as you’ve already guessed, it’s not a case of one size fits all. A 4-inch faucet will fit sinks with outer holes that measure 4-inches apart. An 8-inch faucet will fit sinks with outer holes that measure 8-inches apart.

What does a 4-inch centerset faucet mean?

The four-inch measurement for a centerset faucet refers to the center to center distance between the two furthest mounting holes. Centerset faucets have three mounting holes. … All faucets with this kind of mounting pattern are measured between the two furthest spaced openings to get the desired measurement.

Can a kitchen faucet be too big?

First, there are practical matters. If the faucet is too small, you may have trouble using it to wash larger items like big pots and pans since they won’t fit comfortably underneath it. … Similarly, a faucet that is too large will dominate the kitchen and make the room feel cluttered.

How far should kitchen faucets extend?

The standard reach for many sink faucets is an average measurement of 5.5 inches deep. It can go up to 8 inches. Are you using your vessel sink to wash hands, shave, brush your teeth, and other grooming activities? If the sink’s bowl is sloped, then a six-inch deep faucet would be best.

How do I know what kind of faucet to buy?

How far apart are kitchen faucet holes?

On many three- and four-hole kitchen sinks, 6 or 8 inches is a standard sink faucet hole size. Widespread faucet hole spaces can be as far apart as 16 inches. Faucets with this wider spread consist of separate parts that are individually spaced without an escutcheon or base plate joining them.

Should kitchen faucet line up with drain?

For an ideal installation, the faucet spout should line up with the center of the sink drain so that when the faucet operates, water flows into the drain. This helps avoids many splashing issues, especially with taller faucets.

Why is the faucet so close to the back of the sink?

Faucets are at the back so water connections had minimum interference with under-sink storage, and to leave area over sink clear for physical wash access.

How far back should faucet be from farmhouse sink?

The distance between the faucet holes and the edge of the sink depends on the faucet style and should be such that the spout completely clears the edge of the sink. You’ll usually find the setback distance, which is typically from 2 to 4 inches, listed in the product specifications.

Can you put a one hole faucet in a three hole sink?

If you’re replacing the kitchen faucet in your existing sink, look underneath the sink to see how many holes it has (usually between one and four). … You can install a one-hole faucet in a three- or four-hole sink by adding a deck plate but not vice versa.

Can any faucet fit my sink?

Bathroom Faucet Mounting Types

Not all bathroom sink faucets work with every sink, so it’s important to make sure the faucet you choose will fit your sink or basin. Standard faucet drillings are centerset, single-hole or widespread. … Here’s How to Replace a Bathroom Faucet.

Are kitchen faucets interchangeable?

There are many different kitchen faucet and sink designs available, but they’re not always compatible. … Kitchen faucets can have from one to four mounting holes. Three holes are used for the spout and two handles. A fourth hole is typically used for an accessory, such as a soap dispenser or side sprays.

Which is better single or double handle faucet?

A two handle faucet provides more control than a single handle faucet, and thus allows you to better adjust the water temperature. In addition, a two handle faucet allows you to better control the water flow rate and to enable individual control of the hot and cold water.

Is Delta faucets better than Moen?

When it comes to Delta vs. Moen faucet quality, we feel Moen offer the highest quality of the two brands and that perhaps is why they are the most expensive too. … Delta definitely has more budget-friendly options to offer than Moen does.

Which is better pull out or pull down kitchen faucet?

Pull-out faucets take up much less headroom than a pull down model, making it a great choice for kitchens with cabinet space above the sink. … If you have a shallow sink, a pull-out faucet may be more beneficial, as it has less splashback than the pull-down model.

Will a widespread faucet fit?

Unfortunately, the majority of widespread faucets will not fit in that space. A happy alternative would be to use a mini widespread faucet. These are widespread faucets that are designed to fit in the same space as a centerset faucet. They come in 4-inch, 6-inch, and 8-inch options.

What is a mini widespread faucet?

You often see a widespread faucet on a granite or marble countertop. It’s the type of faucet that, when viewed from above, doesn’t appear to have anything connecting the handles and the spout. A mini widespread faucet is the version for bathroom counters. Its handles are separated by 4 inches.

How far apart is widespread faucet?

Widespread faucets are designed for three-hole installation and feature three separate pieces: two handles and a spout. The standard distance between the handles is at least 8 inches, making them slightly larger than other types of bathroom faucets.

Is a centerset faucet a single-hole?

A centerset faucet ​works with both single-hole and 3-hole basins, this is an easy-to-install option. This style features a deckplate that contains the handles and spout in one plate. This type of faucet can be used on sinks and countertops with one to three holes. Centerset faucets require holes with 4-inch centers.

What is the difference between centerset and single-hole faucet?

Faucet Handles

A faucet that requires a single-mounting hole does not mean that the faucet must have only one lever to control the flow of hot and cold water. … However, a 4-inch centerset faucet needs three mounting holes and cannot be used with a sink or countertop’s single-hole configuration.

What does a widespread faucet mean?

Widespread faucets feature separate hot and cold handles that are independent from the spout and can be mounted on the countertop or on sinks. It can be mounted on sinks with three holes that fit 8 inches to 16 inches from one side to the other. They are available in a wide range of styles and finishes.

What is the difference between faucet height and spout height?

“Faucet” or “spout” height can refer to either the distance between the base and the highest point on the faucet, or the distance between the base and where the water actually exits the faucet outlet – be sure to check the full dimensions of any faucet you’re interested in to make sure the height being advertised is …

How far should faucet hole be from wall?

In this case there should be about 3 inches of space from the edge of the sink to the wall/backsplash. In most cases this will allow at least a one inch rim around the front of the sink. Again, this measurement will depend on the size of your sink as well as your countertop depth.

How far from the wall should a kitchen faucet be?

How far out should it reach? Connolly recommends that the faucet should extend out at least seven inches from the back of the sink, so you can wash your hands without banging them against the sink. So, if your countertop is 24 inches deep, that would put the spout about 11 inches from the wall.

What is the most reliable brand of kitchen faucet?