A toilet “footprint” is basically the measurement or size of where the bottom of the toilet pedestal meets the floor.
How much space does a toilet need?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How do you measure a toilet footprint?
To measure the rough-in for your toilet, measure from the wall behind to the toilet to the middle of the closet bolt caps on your current toilet. The closet bolts are the bolts holding your toilet to the floor. If you have baseboards or tiling on the wall behind the toilet, do not include those in your measurement.
Do all toilets have same footprint?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. … If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
What is the toilet rough-in size?
The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilet’s product information.
How big is a toilet closet?
Toilet Compartment Recommendations
CONTINUE READING BELOW
The size for a separate toilet compartment should be at least 36×66 inches with a swing-out or pocket door. Code Requirement: The minimum size for a separate toilet compartment is 30×60 inches.
How much space is needed between toilet and vanity?
A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″. If you’re placing your toilet in a compartment, it should be 36″ x 66″, although codes will allow 30″ x 60″.
Are toilet footprints standard?
There is not a standard footprint measurement for toilets because different models and styles have varying dimensions — such as round toilet bowls versus elongated and pedestals being square or rounded.
How do I know if my toilet is a 10 or 12 rough?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
What is an elongated toilet?
An elongated toilet bowl is oval, extending several inches more into the front of the room. As bathrooms become larger, the elongated bowl becomes more common, which may make it seem more contemporary in appearance. The round bowl shape is more often associated with older, smaller baths.
Can a round toilet be replaced with an elongated toilet?
Yes and Make the rough in distance from the back wall 13–1/2 inches and 16- 1/2 inches high toilet from the floor. and place it 1ft 6 inches from any side wall.. That will be perfect and then you can enjoy it.
What does 12 rough in mean for toilet?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. … Rear-outlet toilets are configured a bit differently.
Can you replace a 10-inch rough in toilet with a 12-inch rough in toilet?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
Why does toilet rough-in matter?
The rough-in distance is the distance from the wall behind the toilet, to the center of the drain opening that is underneath the toilet. This measurement is important because it tells you how much room the toilet needs to fit conveniently, allowing adequate space between the wall and the tank.
Are 1 piece toilets better?
One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.
How far should a toilet be from the back wall?
The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.
What is the smallest space for a toilet?
The Minimum Space Needed for a Toilet
A minimum distance from the centerline of the toilet to the side wall of 15 inches. When designing a toilet compartment, you must provide a floor space that is 30 inches wide and 60 inches long.
How far does the toilet have to be from the shower?
A minimum clearance in front of the toilet of at least 21 inches. This is required for all your bathroom fixtures, including the shower, vanity or sink and bathtub. A minimum distance from the center of the toilet to both side walls of 15 inches.
What is the size of a standard bathroom?
The average size of a full bathroom in the US is five by eight feet, or 40 square feet. The average size of a primary bathroom in the US is 115 to 210 square feet, with an average of 160 square feet.
How close can toilet be to bathtub?
It is recommended that the distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches. The minimum distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle is 15 inches.
How much space do you need around a toilet UK?
Minimum sanitaryware sizes
The toilet and bidets must have a minimum space of 70cm in width and 120cm in length. If they are next to a wall, the minimum free space should be 20cm, and if there is an element on their side, they should not be placed less than 15cm away for greater usability.
How long do toilets usually last?
Toilets can last for up to 50 years under average conditions. However, this doesn’t mean that you won’t need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.
Can you replace a 14 inch rough-in toilet with a 12 inch rough-in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.
What is the proper way to use a bidet?
How To Use a Bidet – YouTube
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
What is comfort height toilet?
Seat Heights
Toilet height is measured from the floor to the top of the seat. Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”. However, chair height toilets, what Kohler refers to as Comfort Height® toilets, measure 17” or more.
What is rough in?
Rough-in is the stage of a construction project when the various mechanical, electrical, and plumbing lines are brought in. Once the framing is up, the rough-in stage of construction begins. This is when lines are laid out, but final connections are not made until other stages of the project are completed.
How do you tell if your toilet is elongated or round?
Toilet seats are sold by shape (not by length).
If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat. Notice also that the elongated bowl is shaped more like an oval (egg-shaped).
What toilet uses the least amount of water?
A low-flush or low-flow toilet is a flush toilet that is adapted in order to use significantly less water than a full-flush toilet. Low-flush toilets use a special design of the cistern and the siphon in order to allow the removal of faeces and excreta with less water.
What is the best toilet for a large person?
5 Of The Best Toilets For A Heavy Person
- American Standard 3641.001. …
- Kohler K-6999-0 Memoirs Classic Comfort Height Elongated 1.28 GPF.
- Kohler 3810-0 Santa Rosa Comfort Height Elongated 1,28 GPF.
- Zurn Z5561 ADA, Elongated Pressure Assist, 1.0 GPF Two-Piece Toilet.
Can you put an oval toilet seat on a round toilet?
An elongated bidet seat will still mount on a round toilet, as well as function just fine, but the aesthetics and comfort of the seat will be greatly diminished.
What is dual flush on a toilet?
Single-flush Toilets
They have only one flush mechanism — meaning that all types of waste are flushed with the same amount of water, sometimes as much as 5 gallons. Dual-flush toilets, on the other hand, have two flush mechanisms — normally, two buttons located on the top of the tank instead of a lever.
Which toilet shape is most comfortable?
Elongated toilets, and toilet seats, are thought to be more comfortable than round shaped. They more closely fit the shape of a persons bottom when sitting and allow enough room, in front and in back, for all toilet based activities. Choosing elongated vs round really comes down to the shape of the toilet itself.
Should toilet flange be flush with floor?
For those that don’t already know, the proper toilet flange height is when it’s flush with the top of the finished floor. … Third, you can take off the flange as well as the toilet and trim down the waste pipe that comes up through your bathroom floor. This opening of this pipe should be level and flush with the floor.
Does toilet have to be against wall?
There is no hard-fast rule about whether a toilet should touch the wall, as it is a matter of personal preference. Some people are okay with a toilet tank’s top touching the back wall, while others desire a minimum of one inch of space between the commode and the back wall.
How far should shower drain be from wall?
The drain hole should be a minimum of 12 inches away from the wall and 9 inches in scope. To rough in the drain, use a 1.5-inch pipe. This pipe should have male threads extending a half-inch above the bathroom floor. Any drain will also require ventilation using a P-trap.
Why use offset toilet flange?
For the waste water line, an offset toilet flange will allow you to move the toilet a couple of inches in any direction without having to cut a new hole in the floor or reconstruct the waste water pipe.
What measurements do you need to replace a toilet?
Make sure you measure from the centre of the bolts, up to the drywall (as opposed to the baseboard). If there are four bolt caps, be sure to measure from the center of the rear set. Toilets come in 10”, 14”, and most commonly, 12” rough-in dimensions.
How do you move a toilet closer to the wall?
Install the Offset Flange
- Positions the offset flange so that the bent end moves the flange opening closer to the wall. …
- Make sure the back of the offset flange connects snugly with the drainage pipe. …
- Check to make sure that the flange’s opening is sitting flush and even against the bathroom floor.
Can a toilet be more than 12 inches from the wall?
Toilet Rough In Dimensions: A toilet’s rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
Do toilets have different depths?
Toilets have many standard measurements, including height, width and depth or length. The width is 15 inches, height is just over 18 inches and the depth is 18.9 inches.
What is the difference between a 12 and 14 rough in toilet?
While 12-inch rough-ins are more generally common than 14-inch rough-ins, they both have their merits, and sometimes you need to reduce the space taken up behind the tank, which is where a 14-inch rough-in comes in handy. … So if you’re looking to install 14-inch rough-in toilets, then you’ve come to the right place.
Is 1.6 or 1.28 toilet better?
A 1.28 GPF toilet uses about one–third of a gallon less with each flush than a standard 1.6 GPF toilet. … In a house of five, a 1.28 GPF toilet could potentially save about 10 gallons of water each day. Extrapolated for the entire year, that’s about 3,650 gallons of water saved.
Which toilet brand is best?
Here are the best tested toilets of 2021:
- Best Overall Toilet: Kohler Corbelle K-3814-0.
- Best Toilet for Modern Spaces: Swiss Madison Well Made Forever One Piece Toilet.
- Best Two-Piece Toilet: TOTO Promenade 2-Piece Toilet.
- Best Value One-Piece Toilet: Glacier Bay 1-piece Dual Flush Toilet.
What do I need to know before buying a toilet?
While there are many features to consider when buying a toilet, including height, bowl shape, color, style, and flushing technology, most toilets fall into one of two basic types: gravity-feed and pressure-assisted. Gravity-feed toilets dominate the market, but pressure-assisted models are worth a look.
How far can you move a toilet from the stack?
If your waste line has a diameter of 3 inches, you can place the toilet within six feet of your stack. The toilet can also be as far as 10 feet from your stack, if the diameter of the waste line is 4 inches.
How far away should the toilet be from the vanity?
Toilet placement
A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″.
How far from the wall should a toilet waste pipe be?
1 Answer from a MyBuilder Plumber
Close coupled toilets/ back to wall toilet pans/ or vanity unit toilets. All of which have different distances but the height will always be the same which is 7 inch from finished floor tho center of toilet outlet.