While not all faucets are the same, the standard sink faucet hole size is 1 3/8 inches. For some, a 1 1/2-inch hole may be required. If the faucet is a three or four-hole faucet, you’ll need holes 6 or 8 inches across your kitchen sink.
Are faucet holes standard size?
The standard faucet hole sizes for kitchens and bathrooms are 1 3/8″ (1.375 Inches or 34.925 mm) in diameter unless otherwise mentioned in the specification. However, faucet holes may vary in size depending on the particular make and model.
Are all kitchen faucet holes standard?
Since there are many different types of kitchen faucets, there is no standard or typical hole size. … The faucet hole size will vary depending on the kitchen faucet you plan to install. Measure the faucet hole size before you shop.
What is a standard kitchen faucet hole size?
Hole size = 1 3/8″or 35mm is the worldwide standard faucet hole size.
How do I know what size kitchen faucet I have?
If you have windows or cabinets above your sink, measure upward from the center mounting hole to find the maximum overall height and ensure your new faucet can fit comfortably underneath. To find the ideal spout reach, measure from the center mounting hole forward to the center of your sink.
Are kitchen sink faucets universal?
There are many different kitchen faucet and sink designs available, but they’re not always compatible. … Kitchen faucets can have from one to four mounting holes. Three holes are used for the spout and two handles. A fourth hole is typically used for an accessory, such as a soap dispenser or side sprays.
How do you measure kitchen faucet holes?
If you have separate handles for hot and cold, you have three holes in the sink. Measure the distance between the handles. Hold the the tape measure above the faucet if it’s in the way. If the distance is six inches or more you need a “widespread” or “eight inch spread” faucet.
Are kitchen sink holes standard size?
Many two-handle and single-handle kitchen faucets are widespread faucets. On many three- and four-hole kitchen sinks, 6 or 8 inches is a standard sink faucet hole size. … A standard sink faucet hole has a diameter of 1 3/8 inches, but because not all faucets are the same, some will require a 1 1/2-inch hole.
How do you change a 3 hole faucet to 1 hole?
Take the two inlet line adapters that came with your faucet. And thread them onto your existing
Are there different faucet sizes?
Size: Aerators typically come in one of two sizes: regular (usually 15/16” Male or 55/64” Female) and junior (usually 13/16” M or 3/4” F). You can measure your faucet, or use a simple shortcut using coins.
CONTINUE READING BELOW
What does 8 inch spread faucet mean?
On an 8″ spread there will be 8″ from the center of the hot faucet to the center of the cold faucet. Like this: A 4″ or mini spread will be quite close together and make it difficult to clean around the handles and spout.
How do you read a faucet size?
- Spout reach is measured from the center of the spout base horizontally out to the water stream.
- Spout height is measured from the sink/countertop surface vertically up to the highest point.
- Refer to the specification sheet for your faucet for specific measurements.
How do I choose a kitchen faucet?
- Looks aren’t everything. Most people choose a faucet based on looks alone. …
- Spend enough but not too much. …
- Watch the spout height and reach. …
- Choose ceramic valves. …
- Some finishes are tougher than others. …
- Count the holes in your sink. …
- A single handle is more convenient. …
- Pull-down sprayers are better.
Do all kitchen sinks have 3 holes?
Many kitchen sinks are equipped with three hole faucets, the faucet is installed in the middle hole, and the two handles are installed on the outer holes. While this layout is standard, three-hole configurations can sometimes accommodate additional sink features.
Can any faucet fit my sink?
Bathroom Faucet Mounting Types
Not all bathroom sink faucets work with every sink, so it’s important to make sure the faucet you choose will fit your sink or basin. Standard faucet drillings are centerset, single-hole or widespread. … Here’s How to Replace a Bathroom Faucet.
What are the holes for in a kitchen sink?
- 2-hole sinks allow for a single-hole faucet, and an accessory, like a sprayer.
- 3-hole sinks allow for two-handle faucets only without accessories.
- 4-hole sinks allow for a two-handle faucet and a sprayer or soap dispenser.
What size hole should I drill for a faucet?
A standard (non-air-gap) faucet, with or without tubing attached, needs a hole that’s 7/16″ in diameter or larger. You can install standard faucets comfortably in holes up to 1.25″. It’s possible to install in a 1.5″ hole, but it’s hard with the standard faucet escutcheon.
What is the standard size of faucet supply line?
The two most common are 3/8- and 1/2-inch compression or male pipe thread. Faucets connectors aren’t completely standardized, but most have 1/2-inch male pipe thread connectors.
Are faucets interchangeable?
Yes, bathroom and kitchen faucets are interchangeable.
Can you convert 3 hole faucet with a single?
The bathroom has a two-handle sink faucet and I want to change it to a one-handle bathroom faucet. … So if you have a three-hole sink with the outside holes 4 inches apart, you should be able to install a single-handle bathroom faucet. However, a deck plate to cover all the holes is usually needed.
Can you put a 2 hole faucet in a 3 hole sink?
Even if you have three holes on your sink, you can still use a faucet designed for one or two holes. Many single-lever faucets come with a base wide enough to cover three holes on the sink, provided the holes are 4 inches apart or closer.
How much does a plumber charge to change a faucet?
Faucet installation costs $120 to $300 on average, including removing and replacing an old faucet and adjusting the water lines. The labor cost to install or replace a kitchen, bathroom, or bathtub faucet is $45 to $150 per hour, with plumbers charging for an hour or two. Faucet prices alone average $100 to $350.
How do I know what type of faucet I have?
- Find the logo. The first and easiest way to find out the brand of your kitchen faucet will be if you can locate the logo somewhere on it. …
- Find a model number. …
- Count the splines on the broach and measure the stem. …
- Distinguishing features. …
- Use a broach gauge.
Is 4 inch centerset faucet standard?
The 4 inch and 8 inch faucet specification is a standard choice. The 4” or center set faucet has the faucet’s handles and the spouts combined through a deck plate. But in some designs, the handles and spouts are not joined in a single plate.
Can you use 8 inch 4 inch faucet?
The Distance Between the Outer Holes
But as you’ve already guessed, it’s not a case of one size fits all. A 4-inch faucet will fit sinks with outer holes that measure 4-inches apart. An 8-inch faucet will fit sinks with outer holes that measure 8-inches apart.
What does a 4 inch centerset faucet mean?
The four-inch measurement for a centerset faucet refers to the center to center distance between the two furthest mounting holes. Centerset faucets have three mounting holes. … All faucets with this kind of mounting pattern are measured between the two furthest spaced openings to get the desired measurement.
What is the most reliable brand of kitchen faucet?
- Delta Faucets – Our Highest Rated Overall Brand.
- Kohler – Favorite Designer Brand.
- Moen – Brand Faucet Brand For High End Consumers.
- Kraus – Best For Commercial Style Faucets.
- Pfister – Brand With Widest Selection.
- American Standard – Best Brand For General Homeowner Use.
Is Delta or Moen better?
When it comes to Delta vs. Moen faucet quality, we feel Moen offer the highest quality of the two brands and that perhaps is why they are the most expensive too. … Delta definitely has more budget-friendly options to offer than Moen does.
What is the most popular finish for faucets?
Polished Chrome Finish
Pro: The most popular choice of them all, this shiny finish is perfect for anyone who wants their faucet to stand out. Durable and easy to clean, it will match any other fixture in your kitchen.
Are all 3 hole faucets the same?
You will need to measure the width between the outer holes or estimate it by measuring the width of the deck plate. A 3-hole sink is very common in bathrooms. Depending on the spacing of the holes, you can choose a centerset, mini-widespread, or widespread bathroom faucet.
What is a one hole faucet?
Single-hole faucets mount onto sinks or counters through one hole, rather than three separate holes like larger faucets do. … With this one exception of how the faucet lays out, however, the single-hole faucet connects to the water supply lines the same way three-hole faucets do.
Are faucet handles universal?
Give your faucet a new look by upgrading and replacing your older existing faucet handles. Replacing your handles is an easy and economical alternative to replacing the entire faucet. The universal design will work on most existing faucet fixtures.
How do you replace a 4 hole kitchen faucet?
This is a four hole sink and the most common in kitchens. Start by unscrewing the hot and cold
How do I cover a hole in my kitchen sink?
You have a sink with extra holes and need to fill the holes with extra accessories. The easiest and most inexpensive way is to order faucet-hole caps to cover and plug the extra sink holes.