GE, Profile, and Hotpoint built-in and portable dishwashers: Requires a 120 volt individual, properly grounded branch circuit with a 3 prong grounding type receptacle, protected by a 15 or 20 amp circuit breaker or time-delay fuse.
How many amps does a typical dishwasher use?
| Domestic Portable Appliance | Amps Used | Watts Used |
|---|---|---|
| Dishwasher | 10.0 | 2200 |
| Iron | 13 | 3000 |
| Microwave | 6.5 | 1500 |
| Vacuum cleaner | 9.0 | 2000 |
Can you run a dishwasher on a 15 amp circuit?
The dishwasher circuit should be a dedicated 120/125-volt, 15-amp circuit. … You may also elect to feed the dishwasher with a 20-amp circuit using 12/2 NM wire with a ground.
Does a dishwasher need a 20 amp circuit?
Dishwashers run on 115-volt or 120-volt power. The dishwasher circuit should be a 125-volt, 15-amp circuit. You can feed the dishwasher a 20-amp circuit with a ground. … You will need to install a breaker in a free space, attach the wires and run the cable to the dishwasher.
What size breaker do I need for a dishwasher?
The dishwasher needs a single-pole breaker that has at least 15amps. If you operate the dishwasher on the same circuit breaker as the garbage disposal, you need to use a 20 Amp breaker.
How much power does a dishwasher pull?
A dishwasher is a household appliance used to wash your cutlery, dishes and other kitchen utilities. Modern dishwashers are energy efficient and do not use a lot of water. Dishwashers use between 1200 and 2400 watts of power, with an average dishwasher using 1800 watts.
Can I plug a dishwasher into a regular outlet?
Yes, you can plug a dishwasher into a regular outlet. … Due to the National Electrical Code, all outlets must be accessible. If you cannot find where the dishwasher is plugged in, then it’s likely hardwired. Dishwashers do not typically come with power cords.
Does a dishwasher need a GFCI?
GFCI protection is not required for receptacles serving appliances like dishwashers, or convenience receptacles that do not supply countertop surfaces. Receptacles installed within 6 ft of the outside edge of a wet bar sink must also be GFCI-protected [210.8(A)(7)].
Can a dishwasher be on a small appliance circuit?
A kitchen requires minimum of two 20-amp small appliance circuits, and they must be GFCI-protected. … A dishwasher and disposal can share a single circuit, but only if the combined rating of the two appliances does not exceed the circuit amperage rating.
Can a dishwasher be hardwired?
Unlike the plug-in appliances used in rooms beyond the kitchen, a dishwasher must be hardwired and hooked up to the home’s plumbing. If you’re up to challenge of installing it yourself, you can save real money.
Can you use 14 2 wire for a dishwasher?
Do Not Use 14-2 wire for a dishwasher or any other 20 amp circuit, 14-2 wire is rated for 15amps. . And if you install a outlet it should be a GFI(ground Fault Intercepter) outlet.
CONTINUE READING BELOW
What appliances require a 20 amp circuit?
A 20-amp circuit is used to power appliances like microwave ovens, toasters, as well as blenders.
Can I put a 15 amp outlet on a 20 amp circuit?
15 Amp Circuits
Household receptacles are connected using 12-gauge wire. … In most home installations, several 15-amp receptacles connect to a 20-amp circuit breaker. This allows multiple devices to connect to a single 20-amp circuit as long as the total circuit load does not exceed 20 amps.