How to choose a sink faucet?

How do I choose a sink faucet?

Tips on Choosing a Faucet
  1. Looks aren’t everything. Most people choose a faucet based on looks alone. …
  2. Spend enough but not too much. …
  3. Watch the spout height and reach. …
  4. Choose ceramic valves. …
  5. Some finishes are tougher than others. …
  6. Count the holes in your sink. …
  7. A single handle is more convenient. …
  8. Pull-down sprayers are better.

How do I know what size faucet I need?

To find the right size faucet for your sink, grab a tape measure and follow these easy steps.
  1. Step 1: Determine Your Project Scope. …
  2. Step 2: Take Stock of the Sink and Mounting Holes. …
  3. Step 3: Measure the Faucet Centers. …
  4. Step 4: Check the Surrounding Space.

How do I choose a kitchen faucet size?

First, you need to address size as it relates to functionality. Second, to look balanced, your faucet should be in proportion to the sink. A large faucet would visually overpower a small prep sink, while a small faucet might look odd in a large sink and countertop area.

How do I know what kind of kitchen faucet to buy?

Traditional faucets, with hot and cold taps, require three holes for the taps and spout, and a fourth for the sprayer. Additional options — soap dispensers or integrated sprayers — create a different set of requirements.

What is the standard faucet size?

After researching, I wrote this article to share my findings with you. What are the standard faucet hole sizes for kitchens and bathrooms? The standard faucet hole sizes for kitchens and bathrooms are 1 3/8″ (1.375 Inches or 34.925 mm) in diameter unless otherwise mentioned in the specification.

What does 8 inch spread faucet mean?

On an 8″ spread there will be 8″ from the center of the hot faucet to the center of the cold faucet. Like this: A 4″ or mini spread will be quite close together and make it difficult to clean around the handles and spout.

What is standard faucet spacing?

Typically, faucet holes vary from one to four, with the fourth hole serving as a place for a soap dispenser. For standard hole spacing, four inches is the required space for a center set faucet. But some faucet types, like widespread faucets, require a different spacing measurement.

How do you measure a sink faucet?

Also known as faucet centers. That’s the distance between the faucet handles and you’ll need to know

What is the difference between faucet height and spout height?

“Faucet” or “spout” height can refer to either the distance between the base and the highest point on the faucet, or the distance between the base and where the water actually exits the faucet outlet – be sure to check the full dimensions of any faucet you’re interested in to make sure the height being advertised is …

Which faucet brand is best?

Best Faucet Brands For Your Kitchen
  • Delta Faucets – Our Highest Rated Overall Brand.
  • Kohler – Favorite Designer Brand.
  • Moen – Brand Faucet Brand For High End Consumers.
  • Kraus – Best For Commercial Style Faucets.
  • Pfister – Brand With Widest Selection.
  • American Standard – Best Brand For General Homeowner Use.

Do all faucets fit all sinks?

Not all bathroom sink faucets work with every sink, so it’s important to make sure the faucet you choose will fit your sink or basin. Standard faucet drillings are centerset, single-hole or widespread.

How do you measure a faucet for the kitchen sink?

To determine if you need a center set or widespread lavatory faucet measure the distance between the

How far should faucet hole be from sink?

The distance between the faucet body (where the water enters the faucet) and the areator is usually 8 to 10 inches for a kitchen faucet. However some oversized faucets have a reach of 11 to 16 inch.


Are there different faucet sizes?

Size: Aerators typically come in one of two sizes: regular (usually 15/16” Male or 55/64” Female) and junior (usually 13/16” M or 3/4” F). You can measure your faucet, or use a simple shortcut using coins.

Are sink holes standard size?

While not all faucets are the same, the standard sink faucet hole size is 1 3/8 inches. For some, a 1 1/2-inch hole may be required. If the faucet is a three or four-hole faucet, you’ll need holes 6 or 8 inches across your kitchen sink. Widespread faucet hole spaces can be as wide as 16 inches.

Is 4 inch centerset faucet standard?

The 4 inch and 8 inch faucet specification is a standard choice. The 4” or center set faucet has the faucet’s handles and the spouts combined through a deck plate. But in some designs, the handles and spouts are not joined in a single plate.

What does a 4 inch centerset faucet mean?

The four-inch measurement for a centerset faucet refers to the center to center distance between the two furthest mounting holes. Centerset faucets have three mounting holes. … All faucets with this kind of mounting pattern are measured between the two furthest spaced openings to get the desired measurement.

How do you measure a faucet spread?

Measure the distance between the handles. Hold the the tape measure above the faucet if it’s in the way. If the distance is six inches or more you need a “widespread” or “eight inch spread” faucet.

What is 8 inch faucet hole spacing?

Then you will need to find a faucet that will fit the pre-drilled holes in your sink. But as you’ve already guessed, it’s not a case of one size fits all. A 4-inch faucet will fit sinks with outer holes that measure 4-inches apart. An 8-inch faucet will fit sinks with outer holes that measure 8-inches apart.

What does 3 hole faucet mean?

Three holes are used for the spout and two handles. A fourth hole is typically used for an accessory, such as a soap dispenser or side sprays. … If you’re installing a single-handle faucet into a sink with three holes, the deck plate will usually cover up the unused openings.

How do I know what kind of bathroom faucet I have?

Count the Splines

If you can’t find an identifying model number or manufacturer’s name on the faucet itself, you can identify the manufacturer if you remove the handle and the faucet stem and count the number of splines on its broach and measure the length of the stem.

Are Single handle faucets better?

Single-handle faucets pros

Single-handle faucets are much more user-friendly than double-handle faucets. Installation is simple and requires the drilling of only one hole. They’re a common choice for older people as turning them is almost effortless for the infirm or those struggling with arthritis.

What is the spout on a faucet?

The spout is the part of the faucet that most people notice first, it’s the part that delivers water from the body to the sink and it can be distinctive in its design. A straight spout provides a long reach with a low profile.

What is faucet spout clearance?

Clearance. For a faucet that swivels and for easy cleaning, measure the distance between the faucet hole and the backsplash to ensure that the faucet has enough space to move freely (without the spout or handle hitting the wall).

Are Delta or Moen faucets better?

When it comes to Delta vs. Moen faucet quality, we feel Moen offer the highest quality of the two brands and that perhaps is why they are the most expensive too. … Delta definitely has more budget-friendly options to offer than Moen does.

Which is better one or two handle faucets?

A two handle faucet provides more control than a single handle faucet, and thus allows you to better adjust the water temperature. In addition, a two handle faucet allows you to better control the water flow rate and to enable individual control of the hot and cold water.

Are touchless faucets worth it?

When you want water on-demand with no mess, touchless faucets are the ideal choice. Some people prefer a touch faucet because it offers more control to the user. It is less likely to accidentally turn the faucet on or off when you have to physically touch as opposed to make a motion in front of it.

What is the difference between widespread and centerset faucets?

The primary difference between widespread faucets and centerset faucets is in their design and installation. Widespread faucets come with separate handles. They are not connected and they are not mounted onto a base plate. Centerset faucets usually come as a single unit, with the faucet and handles connected.

Are faucet handles universal?

A broken faucet handle on a bathroom or kitchen sink can make it difficult to turn the water on and off. … Fortunately, there are both universal and manufacture-specific parts available to change your faucet handles. You can even change the style to match the decor of your bathroom or kitchen.

Can you put a one hole faucet in a three hole sink?

If you’re replacing the kitchen faucet in your existing sink, look underneath the sink to see how many holes it has (usually between one and four). … You can install a one-hole faucet in a three- or four-hole sink by adding a deck plate but not vice versa.

Why is the faucet so close to the back of the sink?

Faucets are at the back so water connections had minimum interference with under-sink storage, and to leave area over sink clear for physical wash access.

How much space should be between backsplash and faucet?

In this case there should be about 3 inches of space from the edge of the sink to the wall/backsplash. In most cases this will allow at least a one inch rim around the front of the sink. Again, this measurement will depend on the size of your sink as well as your countertop depth.

What is the bottom of a faucet called?

As I understand it, the tap or faucet is the thing that controls the flow, it is not the orifice that the water actually comes out of. That orifice is the spout. In SDG’s picture, the middle item is the faucet, the bottom item is the spout.

What is a widespread faucet?

Widespread faucets feature separate hot and cold handles that are independent from the spout and can be mounted on the countertop or on sinks. It can be mounted on sinks with three holes that fit 8 inches to 16 inches from one side to the other. They are available in a wide range of styles and finishes.