How to read tire size on atv?

There are three distinct numbers printed on the front side and the back side of the tire. So the

What does tire size 25×11 12 mean?

The numbers 25-11-12 represent the dimensions of the tire. The first number is the height, the second number is the width &amp, the third number is the diameter of rim that it will fit on. … As long as the width of the tire is greater than the width of the rim they should mount together just fine.

What size tires can I fit on my ATV?

Your typical ATV tire diameter fits within a range of about 20 inches for the smallest machines to about 30 inches for your more factory mud-equipped machines. Basically, your quad will typically fit into one of few categories: Sport quads—20 to 25 inches. Utility quads—24 to 28 inches.

Can you change tire size on ATV?

Bigger tires can assuredly help you gain ground clearance and traction in sand, deep mud, snow or uneven terrain. As a general rule, most vehicles can safely handle an increase in tire size one or even two sizes larger than stock.

How are ATV wheels measured?

You’re gonna start the tape measure behind the lip there on one side and you’ll read it on the other

What size four wheeler does a 12 year old need?

The CPSC considers that an adult size ATV has an engine of 90cc and greater and suggest youth be at least 16 years old to operate an adult size ATV.

Power and Speed.
Age of Operator ATV Engine Size
Under 6 years of age not recommended
Age 6-11 Under 70cc
Age 12-15 70-90cc
16 years and older Over 90cc

What does the size mean on ATV tires?

ATV tire explaination: ATV tires are listed in a set of three numbers, generally separated by dashes (25-10-12), or by an ‘x’ (25x10x12) or a combination of the two: 1st Number = The overall tire height when inflated (Ex. 25×10-12 is 25″ tall). 2nd Number = The overall tire width when inflated (Ex.

Why are ATV tires smaller in the front?

The smaller-width tires on the front of a side by side have less surface contact due to their smaller size. This means there is less tire touching the ground at any given time. Because of this, the UTV becomes easier to steer. Because the steering effort is reduced, the side by side becomes easier to maneuver.

Are all ATV bolt patterns the same?

Can-Am: All modern ATV and SxS’s are 4/137 bolt pattern. Arctic Cat: All use a 4/115 bolt pattern. Yamaha: All non-sport and modern ATV &amp, SxS’s use a 4/110 bolt pattern, with the exception of the 2019 YXZ, which uses a 4/156 bolt pattern.

What tire sizes mean?

The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.

What is a 4 3 offset?

Every rim has an offset that consists of 2 numbers that are measurements. … For example: An ATV wheel with a 4+3 offset will measure 4” from the inside lip to the center of the rim where the hub and rim meet, and then it will measure 3″ from the hub to the outside lip.


How is ATV offset measured?

The offset of a wheel is stated by reading the measurement of the inside first, then the measurement of the outside (valve stem side). For example: In the diagram below, the offset is 3+2, meaning the inside half of the wheel measured 3 inches, and the outside (valve stem side) measured 2 inches.

What does a 4 137 bolt pattern mean?

What Vehicles Use Wheels With 4 X 137 Bolt Pattern? The 4 X 137 bolt pattern is common to KAWASAKI, CAN-AM BOMBARDIER and SUZUKI vehicles. A full list of vehicle makes and models appears below. It is prudent to re-torque wheels after about 60 to 90 miles (100km to 150km) of driving.