71 to 74 Mavericks measure around 52 – 53 inches.
How wide is a Ford 9 inch rear end?
The 9” rear axle was manufactured in seven different housing widths, from 57-1/4” to 69-1/4” wide, any of which may be ideal for a particular chassis.
How wide is a Ford 8 inch rear end?
The Ford 8-inch housing has a center casing roughly 11 inches wide. Most flange-to-flange assemblies are between 56 and 62 inches wide, you can check the axle length chart we have available at www.hemmings.com/parts-locator for specific measurements for your body style.
How wide is a Ford Ranger rear end?
The ford ranger 8.8 Has a rear end width of 56.5 To 58.5″ Depending on the model.
How wide is a Bronco rear end?
| Vehicle Fitment | 1967 thru 1977 Ford Bronco |
|---|---|
| Wheel Bolt Pattern | 5 on 5 1/2″ with 1/2″ studs installed |
| Brake Space | 2.5 inch axle standoff |
| Width | 58 inches (between wheel mounting surfaces) |
| Fluid Capacity | 3 quarts of 85w-140, non-synthetic (API GL-6 rated only) |
How wide is a S10 rear end?
Finding a good rear end for your project:
S10 2WD’s have a drum to drum mounting width of 54.5″ which is perfect for a T-Bucket with larger back wheels. The Blazer and 4WD models have about 4.5-5″ more overall width and works well for 26 and newer fender-less roadsters, and 23 style T’s with narrower rear wheels.
How do you measure a rear end width?
- Locate the axle flanges on either side of the rear axle. The flange is the platform on which the wheels are mounted and bolted to the axle.
- Using a measuring tape, measure from one flange to the other.
How wide is a 1968 Ford f100 rear end?
From 1968-1972, Ford also produced a 9-3/8″ rear end in the F100s.
How do you tell the difference between a Ford 8.8 and 9?
There’s an easy way to tell an 8-inch apart from a 9-inch. All of the 8-inch case nuts can be accessed with a socket. In contrast, on the 9-inch, two nuts on the bottom at about the 6 and 7 o’clock positions cannot be accessed with a socket and require a wrench.
What cars have Ford 8 inch rear end?
- 1986-2014 Ford Mustang.
- 1982-2012 Ford F-150.
- 1982-1996 Ford Bronco.
- 2001-2005 Ford Explorer Sport Trac.
- 1991-2011 Ford Ranger 4.0L models.
- 1991-2001 Ford Explorer (Solid axle)
- 1985-2011 Ford Panther platform vehicles.
- 2012-Present Ford F-150 (Super 8.8, depending on engine and other options)
How wide is a Mustang 8.8 rear end?
| Vehicle Application | Axle Width (inches) |
|---|---|
| ’86-’93 Ford Mustang 8.8 | 59 11/44 |
| FORD | |
| ’65-’66 Mustang | 57 11/44 |
| ’67-’70 Mustang 8.0 | 59 51/48 |
How wide is a Ford 8.8 axle?
7] From the factory, 8.8s use 1330- or 1310-series U-joints. This is the companion flange where the yoke bolts. The 1330 has a 3316-inch width for the U-joint, and the 1310 has a 358-inch width. The 1330 is usually found in Ford trucks.
How wide is a s10 rear end backing plate to backing plate?
A 2WD S-10 rearend is 48″ backing plate to backing plate. A 4WD S-10 is 52″ wide.
CONTINUE READING BELOW
How wide is a Ford Falcon rear end?
19Fordy
49-51 Merc rear is 61 1/4 in.
How wide is a G body rear end?
| Vehicle Fitment | 78-87 GM G-body vehicles (Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons) |
|---|---|
| Brake Space | 2.5 inch axle standoff |
| Width | 58 inches (between wheel mounting surfaces) |
How wide is a 1956 Ford rear end?
The Maverick 8″ rear is 56 1/2″ wide and the ’57-59′ ford 9″ rears are 57 1/4″ wide.