17. What should you do when you see a hazard in the roadway ahead of you? Use your four way flashers or brake lights to warn other.
When you must leave the road to avoid a hazard or emergency you should keep in mind that?
Sometimes you need to leave a road to avoid a hazard or emergency. When you do so you should keep in mind, that: It’s less dangerous to drive onto the shoulders than to make a collision.
Which of the following is a good way for you to see potential hazards while driving?
To avoid last minute moves, scan the road 10–15 seconds ahead of your vehicle so you can see hazards early. Constantly staring at the vehicle or road right in front of your vehicle is dangerous. As you scan ahead, be alert for vehicles around you. Use your mirrors.
What two choices do you always have when you encounter a road hazard?
Switch on your hazard lights, check the traffic, and gently steer your car to a safe area as far off the road as possible, braking gently when you’re ready to stop. Once you’re out of harm’s way, get out of the car, survey the situation, and phone for help.
When scanning the road for potential hazards What questions can you ask yourself?
What two questions should you ask yourself to help you choose safe and effective driving behaviors? Am I right? Is it fair? Will I get there?
What should you do when your vehicle hydroplanes?
How to handle your vehicle when hydroplaning
CONTINUE READING BELOW
- Remain calm and slow down. Avoid the natural urge to slam on your brakes. …
- Use a light pumping action on the pedal if you need to brake. If you have anti-lock brakes, you can brake normally.
- Once you’ve regained control of your car, take a minute or two to calm yourself down.
What should you do to correct a skid?
How to correct a skid – GEICO – YouTube
How do you minimize a hazard separate a hazard and compromise space?
How do you minimize a hazard, separate multiple hazards, and compromise space? You first minimize a hazard by putting space between yourself and the hazard. You separate hazards by adjusting your speed to deal with one hazard at a time. You compromise space by giving more space to the greater hazard.
What hazards might a new driver see in a rural area?
Traffic School
There are some potential hazards in rural areas that you should be aware of: unmarked field and farm driveways and entrances, livestock crossing areas and farm vehicles, rough road conditions.
What should you do if you can’t see 15 seconds ahead of you?
At highway speeds it’s about a quarter of a mile. If you’re not looking that far ahead, you may have to stop too quickly or make quick lane changes. Looking 12 to 15 seconds ahead doesn’t mean not paying attention to things that are closer. Good drivers shift their attention back and forth, near and far.
How do you separate hazards while driving?
Separate the hazards is the process of adjusting the speed of a vehicle to handle one hazard at a time when two or more hazards threaten a driver. Compromise Space means reduce risk by giving as much space as possible to the greater of two or more hazards.
What should you do when your car starts to hydroplane?
Explanation If your vehicle begins to hydroplane, do not apply the brakes. Instead, release the accelerator and push in the clutch. This will slow down your vehicle and help it regain traction.
How can we avoid hazards while driving?
Following these defensive driving tips can help reduce your risk behind the wheel:
- Think safety first. …
- Be aware of your surroundings — pay attention. …
- Do not depend on other drivers. …
- Follow the 3- to 4-second rule. …
- Keep your speed down. …
- Have an escape route. …
- Separate risks. …
- Cut out distractions.
How do you scan when driving?
Scanning The Road On The Driving Test-Driving Lesson – YouTube
What should you look for when scanning the driving environment?
In order to avoid last minute moves and spot possible traffic hazards, you should always look down the road ahead of your vehicle. When you are looking far enough ahead in your travel path, you will be able to spot hazards early and you will be well-prepared to react to them.
When scanning an intersection you should scan?
Scan the intersection, identify potential conflicts and mentally determine the best course of action, should the worst-case scenario occur, thereby, executing the determined response in good time. Look before entering: Always come to a full stop before the stop sign.
What should you do if your car hydroplanes quizlet?
What should you do if your car hydroplanes? Gently ease your foot off the gas until the car slows down. Your tires should touch the road soon thereafter. If you need to brake, do it gently by pumping the brakes.
How do you stay safe during hydroplaning?
Tips to avoid hydroplaning
- Don’t use cruise control in the rain. …
- Make sure your tires have adequate tread. …
- Rotate your tires. …
- Don’t wait until your tires are on their death bed to replace. …
- Avoid standing water and puddles.
- Drive at a safe speed. …
- Pay attention to the cars in front of you. …
- Don’t hit the brakes.
What is the first thing you should do during an enforcement stop?
What a Driver Should Do During an Enforcement Stop. Acknowledge the officer’s presence by turning on your right turn signal. Activating your signal lets the officer know that you recognize their presence.
How do you stop a skid?
If you start to skid, ease off the gas pedal, stop braking, and turn the steering wheel in the direction of the skid. If you can’t control your car on a slippery surface, try to find something to stop you. Try to get a wheel on dry pavement or on the shoulder of the road.
What must you do if your car starts to skid quizlet?
The first thing that should be done when a motor vehicle starts to skid take your foot off the accelerator and steer in the direction of the skid. If you run off the pavement, you should steer straight and slow down before attempting to return to the pavement.
What does it mean to minimize a hazard?
minimize a hazard. reducing risk by putting more distance between yourself and the hazard.
What are 3 factors that will reduce risk while driving?
What are 3 ways to reduce your driving risk?
- Reduce your speed.
- Obey traffic control devices.
- Wear your seat belt.
- Limit distractions in your car.
- Avoid drinking alcohol before driving.
- Keeping your vehicle in good working order.
What does it mean to separate hazards?
separate hazards. adjusting your speed in order to handle one hazard at a time. central vision. that part of a field of vision where you can see clearly and sharply. line of sight.
What is one of the greatest dangers in rural driving environment?
One of the greatest dangers in rural driving environments is drivers getting too relaxed in open spaces and speeding.
What safety precautions should you take when driving in mountains?
What special safety precautions should you take for mountain driving? Driving up a mountain accelerate slowly. Driving down a mountain use brakes or downshift to prevent a runaway vehicle. Weather in the mountains can change quickly watch for conditions on roadway and maintenance vehicle.
What are 4 examples of hazards you may confront when driving in the country?
Some of the safety hazards present that are most likely to result in an accident include:
- Lack of accurate maps or signs.
- Blind curves.
- Unusually sharp curves or steep hills.
- Narrow width that isn’t sufficient for vehicles to safely pass.
- Obstacles on the road such as debris, animals and farm equipment.
What are two main thing to look for ahead?
12-15 Seconds ahead of you. what are two main things to look for ahead? for stopping and to change lanes, it is important to have enough space for either or. You just studied 10 terms!
How far ahead should you search for risks and hazards?
Proper Scanning:
mirrors. A general rule of thumb is to scan ahead 12-15 seconds in all environments, 1-11⁄2 blocks in city environments and 1⁄4 mile in highway environments. Blind spots and mirrors should be checked every 3-5 seconds before and after changing lanes.
How do you look 12 seconds ahead?
Drive: How to use the 12 second rule – YouTube
What should you do to reduce your risk on urban roadways when driving past parked vehicles on the side of the roadway?
Approach the curve in the right portion, then accelerate out of the apex. What should you do to reduce your risk on urban roadways when driving past parked vehicles on the side of the roadway? a. Move to the right portion of the lane.
What steps should you take to safely handle a curve?
Judge how sharp the curve is. Slow down before you enter the curve. Braking on a curve may cause you to skid. Reduce speed before entering the curve, and slowly lighten the pressure on the brake until reaching the apex point (where the car is closest to the inside of the curve line).
What are four ways you can communicate with others while driving?
The communication devices of your car include: turn signals, brake lights, hazard lights, a flash of the headlights, and the horn. Sometimes you may communicate by waving or nodding. Use turn signals every time you turn or change lanes.
What causes you to hydroplane?
The three main factors that contribute to hydroplaning are:
Vehicle speed – as speed increases, wet traction is reduced. Tire tread depth – worn tires have less ability to resist hydroplaning. Water depth – The deeper the water, the quicker you lose traction, but thin layers of water cause hydroplaning, too.
What’s the proper sequence for hydroplaning recovery quizlet?
If your vehicle starts to hydroplane, slow down gradually, don’t apply the brakes. Ice and packed snow on the road can cause the car to skid, especially if you’re driving fast or heading downhill. If you go into a skid, ease off the gas pedal, stop braking, and turn the steering wheel in the direction of the skid.
What should you do to avoid hydroplaning quizlet?
to avoid hydroplaning don’t drive on bald or badly worn tires, and slow down when heavy rain, standing water or slush is present. All snow and ice must be removed from the entire vehicle.