What should you not do when driving in a construction work zone?

Work Zone Safety

  1. Be Work Zone Alert.
  2. Do not speed in work zones, obey the posted speed limits.
  3. Stay Alert! …
  4. Watch for workers, drive with caution.
  5. Don’t change lanes unnecessarily.
  6. Avoid using mobile phones while driving in work zones.
  7. Turn on headlights so that workers and other drivers can see you.

When driving in a construction zone you should?

Driving strategies

  1. Slow down. Always pay attention to the speed limit, especially in construction zones. …
  2. Don’t tailgate. …
  3. Stay a safe distance away from construction workers and their equipment.
  4. Watch for stopped traffic.
  5. Merge as soon as possible. …
  6. Do not block traffic. …
  7. Plan ahead.

What are the first 3 things you should do when approaching a construction zone?

Construction Zone Safety: 5 Things All Drivers Need to Know

  1. Increase Your Following Distance. …
  2. Don’t Assume Workers Aren’t Present. …
  3. Follow Instructions From Flaggers. …
  4. Minimize Your Distractions. …
  5. Merge Promptly at Lane Closures.

What 8 things should a motorist keep in mind in construction zones?

Check out our safety tips to keep in mind when driving in a construction zone this summer!

  • Slow down and pay attention to the signs. …
  • Obey the speed limit. …
  • Comply with directions given by flaggers. …
  • Don’t follow too closely. …
  • Expect delays and if possible, plan ahead. …
  • Watch out for workers and other potential hazards.

What are the four things you should do while driving through a work zone?

10 Tips for Driving Safely in Work Zones

  • EXPECT THE UNEXPECTED. …
  • SLOW DOWN! …
  • DON’T TAILGATE. …
  • KEEP A SAFE DISTANCE BETWEEN YOUR VEHICLE, CONSTRUCTION WORKERS AND THEIR EQUIPMENT.
  • PAY ATTENTION TO THE SIGNS. …
  • OBEY ROAD CREW FLAGGERS. …
  • STAY ALERT AND MINIMIZE DISTRACTIONS. …
  • KEEP UP WITH THE TRAFFIC FLOW.

When driving in a construction zone expect the unexpected?

Expect the unexpected — Normal speed limits may be reduced, traffic lanes may be changed, and people may be working on or near the road. Slow down — Speeding is one of the major causes of work zone crashes. Don’t tailgate — Keep a safe distance between you and the car ahead of you.


When approaching and driving through a construction zone you should quizlet?

One major reason for motorcycle accidents: Other motorists cannot see them, especially in high traffic and at night. When approaching and driving through a construction zone you should: Slow your speed and adjust your vehicle’s position.

What four things do you need when approaching a construction zone in Illinois?

When approaching or entering a highway construction or maintenance area (also known as work zones), Illinois law requires motorists to slow down, discontinue wireless/cellphone use (unless using a hands-free device that may include the use of a single-sided headset), yield to any authorized vehicles or workers in the …

What are the 3 questions you should ask yourself when deciding to pass?

So, before you pass a vehicle, ask yourself:

  • Is it legal?
  • Is it safe?
  • Is it worth it?

How do you drive around construction?

  1. Stay Alert and Minimize Distraction.
  2. Turn Your Headlights On, Even if It Isn’t. Required by Law. Pay Attention to the Road.
  3. Merge into the Proper Lane.
  4. Don’t Tailgate.
  5. Know Before You Go.
  6. Obey the Posted Speed Limit.
  7. Change Lanes Safely.
  8. Follow Instructions from Flaggers.

What should a motorist consider while driving at night?

To drive safely at night, slow down and drive within range of the vehicle’s headlights. A motorist should always be sure the vehicle can stop within distance that he//she sees ahead. A motorist must consider his/her speed, reaction distance, and braking distance at night.

When should you drive at night?

A Adjust your speed to keep your stopping distance within your sight distance. “At night your headlights will usually be the main source of light for you to see by and for others to see you. You can’t see nearly as much with your headlights as you see in the daytime.

How does road rage affect your driving?

How Does Road Rage Affect Your Driving? Road rage can put a driver into an angry, hostile state. It can lead to behaviors that provoke other motorists or cause them to worry about their safety.

What is the first thing you should do upon entering your vehicle before driving?

1) Lean in and stick the key in. 2) Sit down and adjust seat if necessary. 3) Check mirrors. 4) Clutch and brake in.

What is the first thing you should do during an enforcement stop?

What a Driver Should Do During an Enforcement Stop. Acknowledge the officer’s presence by turning on your right turn signal. Activating your signal lets the officer know that you recognize their presence.

What should you do if you are driving a slow moving vehicle?

Explanation: If you’re driving a slow-moving vehicle along a narrow road, try not to hold up faster traffic. If you see vehicles following behind, pull over in a safe place and let the traffic pass before continuing.

When driving in a construction zone slightly increase your speed Expect the unexpected expect construction workers to yield to motorists?

Expect the unexpected. Expect construction workers to yield to motorists. Explanation You may encounter unexpected conditions in a construction zone. For the safety of yourself, other drivers, and construction workers, drive with extraordinary caution.

What is the responsibility to make sure that the traffic and work zone laws are enforced?

The police and the courts have the responsibility to make sure that the traffic and work zone laws are enforced. Public safety agencies have the responsibility of responding to and securing crash locations and enforcing traffic laws.

Should you drive in low gear in inclement weather?

Drive in a low gear. Steer and brake smoothly. Explanation When driving during unfavorable weather conditions, avoid slamming on the brakes and making sharp, quick turns. These behaviors will make controlling your vehicle in inclement weather even more difficult.

When you drive through a work zone you should not quizlet?

when driving through a highway work zone, you should. reduce your speed and adjust lane position away from workers. when you make left turn onto a two way street, which lane should you enter.

What action should you take when approaching a railroad crossing quizlet?

What is the appropriate action to take when approaching a railroad crossing that does not have signals to direct traffic? Slow down and be prepared to stop. May still turn, but you must yield to oncoming traffic. You just studied 22 terms!

When approaching a railroad crossing you should group of answer choices?

Explanation When you see any signs indicating a nearby railroad crossing, you should slow down, look for a train, and be ready to stop. If the red warning lights are flashing or the gate is down, you must stop 15 to 50 feet before the railroad tracks. Do not try to go around the gate.

What tips and cautions would you recommend to drivers in busy downtown traffic?

Driving tips for traffic jams

  • Avoid aggressive driving and weaving from lane to lane.
  • Keep a safe distance, at least three seconds, between you and the vehicle ahead of you. This will help you avoid frequent braking and rear end collisions.
  • Watch the traffic ahead closely. …
  • Stay focused.

When should you not turn left?

When making a left turn, avoid cutting the corner so sharply that you run into someone approaching from the left. However, you must leave room for oncoming vehicles to turn left in front of you. Begin the turn in the left lane. Enter the two-way road to the right of its yellow dividing line.

What must you do when traveling through a work zone no matter what time of day?

Turn on your headlights when traveling through a work zone, no matter what time of day. This is the law for all posted work zones, not just for active ones. Using your headlights makes your vehicle more visible to other traffic as well as to highway workers.

What’s the most important question to ask yourself while driving?

One of the questions you should ask yourself as you are deciding to pass another vehicle is? At what speed should you pass another vehicle going in the same direction on a two- lane road? When do I know it is safe to return to my lane after passing another vehicle on a two-lane road?

What are the 2 question that decision makers should ask themselves?

To identify possible outcomes in your decision making, ask yourself five questions:

  • Will the decision I make affect other people and if so, how?
  • What am I sacrificing because of my decision?
  • Am I acting in a responsible manner?
  • Will there be long-term consequences because of my decision?

What are the 6 questions you should ask yourself when making decisions?

6 questions to ask when you need to make a decision

  • Define the problem. Question One: What’s the issue that I’m trying to solve? What’s going on here – what’s the real problem? …
  • Objectives and alternatives. Question Two: What’s the objective? …
  • Keep questioning. Question Four: What are the consequences?

How do you navigate a construction zone?

Top Tips for Navigating Construction Zones

  1. Merge as soon as possible. …
  2. Maintain the posted speed limit. …
  3. Obey road crew flaggers. …
  4. Keep a safe distance between you and the vehicle in front of you. …
  5. Don’t change lanes in the work zone. …
  6. Concentrate on the road, not on the construction. …
  7. Minimize distractions. …
  8. Expect the unexpected.

Which of the following is an appropriate technique for driving through a work zone?

Slow Down. Lane closures, traffic pattern shifts and reduced speeds are common in work zones. Make sure to slow down when entering a work zone and keep an eye out for road workers.

What are the top two primary causes of work zone crashes?

The two leading causes of highway construction zone crashes include:

  • Driver inattention — using handheld devices, eating, drinking, programming navigation, or multitasking.
  • Speeding — exceeding the posted highway speed limit or failing to acknowledge construction zone signs.

Should you drive slower at night?

It is best to lower your speed when driving at night. Even with headlights, it will be more difficult to see what is ahead of you on the road at night time. Because your reaction time is slower than it is in daylight, a lower speed is prudent when driving at night.

When skidding a motorist should avoid using?

Remain ALERT! Minimize distractions and expect the unexpected. Avoid using the brakes in the event of a skid.

Why should you not drive at night?

An extra alertness is needed while driving at night. The uncontrolled sleep, tiredness due to long drive, poor lighting on the road can cause fatal accidents.

What is the 4 second rule while driving?

Use the 4-second rule.

This could be a road sign, a tree, or even a piece of tire on the shoulder of the highway. Count the number of seconds in between the car in front of you passing the object and your vehicle passing it. If you count at least 4 seconds, you are at a safe following distance.

Can I drive with high beams?

While it is not against the law if you drive around with your high beams on as long as you follow the required distance and proper dimming of light or using low beams (low beam lights), improper high beam headlight usage comes with penalties.

What is the 3 second plus rule?

If it is not at least three seconds, leave more space and increase your following distance. Think of following distance in terms of time, not space. With a standard of 2.5 seconds, highway engineers use time, rather than distance, to represent how long it takes a driver to perceive and react to hazards.

What does alcohol do to your driving skill?

Alcohol can affect your driving skills and judgment in a number of ways, including: It can delay your reaction time, meaning it will take you longer to react to a potential hazard in your path. It can impair your judgment of speed, meaning you’re much more likely to disobey speed limits while intoxicated.

What does alcohol do to your driving?

Alcohol and other impairing drugs reduce the ability to judge distance, speed and the movement of other vehicles. With increasing impairment, you could drift across the centerline, wander from lane to lane, or even run off the roadway.

How do you respond to an aggressive driver?

If you are dealing with an aggressive driver, make sure your doors are locked. If you’re stopped in traffic, leave enough room to pull out from behind the car you’re following. If an aggressive driver confronts you, dial 911 or go to the nearest police station.

What should you not do before driving?

Make sure that you can focus on your driving, and there are no distractions or things that can impair your senses. For example: Never use your cell phone, put on makeup or do things that can distract you while driving. Never play loud music or put on headphones, which impair your ability to hear.

What are the three things you should look at or for before getting into a vehicle?

4 Things You Should Always Do Before You Start Driving

  • Inspect the Vehicle. It’s a good idea to take a quick look at the car’s exterior before you get going each time. …
  • Buckle up for Safety. …
  • Check Your Mirrors. …
  • Check the Lights.

What is the first thing you should do during an enforcement stop quizlet?

What is the first thing you should do during an enforcement stop? Stop on the left shoulder.

How fast should you drive in rain?

According to Defensive Driving, a rule of thumb to follow is to decrease your speed by a third during wet conditions. For example, if you are driving in rainy weather and the speed limit says 70 mph, then your adjusted speed should be 46 to 47 mph.

Related Posts