While a bathroom sink’s design and overall size may vary from one model to the next, the drain holes are fairly standard, 1.25 inches being a general standard, with widths of 1.5 inches and 1.625 inches also common. The size of the hole helps determine which size drain is needed for that particular sink.
Are all bathroom sink drain pipes the same size?
The piping should be the same size as the drain hole: for a 1 1/2-inch drain hole, use a 1 1/2-inch pipe. All bathroom sink piping is readily available at local hardware and home improvement stores. It’s best to stick to one size for the sink piping, making sure it will all match.
What size is my sink drain?
Some older sinks may have drains that connect to a 1 1/4-inch tailpiece, but most modern drains have a 1 1/2-inch outlet. All the pipes that connect to the tailpiece, including the P-trap assembly and all the horizontal extensions, are either 1 1/4 or 1 1/2 inches in diameter.
What size is a vanity drain?
The 1½-inch size is used to capture water that might flow out of a kitchen sink, a bathroom vanity or a tub. The two-inch pipe is commonly used to drain a shower stall or washing machine, and it may be used as a vertical stack for a kitchen sink. A three-inch pipe is what’s used in homes to pipe toilets.
What size is main drain line?
Sewer drains from laundry sinks or washing machines are 2 inches in diameter and those from sinks in the kitchen, bathroom or powder room generally use a 1.5-inch pipe. The main sewer pipe leading to the septic tank or public sewer is usually 4 inches.
How do you measure a bathroom drain?
Measure from the piping section where it branches out toward the drain over to the drain hole and write that horizontal distance measurement down. That will give you the length and width that is needed for your drain. Your local hardware or home improvement store should carry a bathtub drain that fits your needs.
CONTINUE READING BELOW
What size should plumbing pipes be?
In most cases, the main pipeline from the street to your home is either 3/4 or 1 inch in diameter, supply branches use 3/4-inch-diameter pipe, and pipes for individual components are 1/2 inch. Remember that water pressure decreases by a half-pound per square inch for every foot pipes extend above your water supply.
Are there different size sink drains?
Measure the Sink
Most drain openings are 1 1/4 inches, although 1 1/2 inches and 1 5/8 inches are also common sizes.
Are bathroom sink plugs a standard size?
Standard bathroom basin plugs measure about 1-1/2 inch (38.1mm) diameter, which suits the hole in a 1-1/4 inch BSP waste. If your original plug is a pop up type, be careful with the replacement as pop up plugs are often a non-standard size.
How do you measure a bathroom sink drain?
How to Pick a Bathroom Sink Drain – Pop Up Drain – YouTube
How do you size a drain line?
Four Steps to Sizing Sanitary Sewers &, Vents
- Add up the total number of drainage fixture units (dfu) for each sanitary branch.
- Determine the sanitary branch sizes using the dfu values.
- Calculate the size of the main building drain using the total of all dfu values.
- Size the vents using an IPC table and the dfu values.
Can a toilet drain into a 2 inch pipe?
Unless two toilets are on the same drain and then it must be a 4-inch plumbing waste pipe, the toilet requires a drain pipe of 3 inches in diameter. Unless there is a toilet discharging into the piping, systems with less than nine units can use a 2-inch pipe.
How do you measure the diameter of a sink drain?
How to Measure a Sink Drain Opening for a Crumb Cup
- Measure the drain opening across its widest part. This gives you the diameter of the drain circle.
- Insert the end of the measuring tape into the drain, beside the edge. …
- Note the measurements on a piece of paper and take them with you when you shop for a crumb cup.
What size is most bathroom sink drain pipe?
While a bathroom sink’s design and overall size may vary from one model to the next, the drain holes are fairly standard, 1.25 inches being a general standard, with widths of 1.5 inches and 1.625 inches also common.
What is the size of bathroom pipe?
Waste drain pipes for toilets in modern plumbing systems are either 3 inches or 4 inches in diameter. The wider the pipe, the more waste it can move and the less likely it will be to clog. A 4-inch pipe can carry about twice the waste of a 3-inch pipe.
What size is water main pipe?
The most common pipe diameter for water mains is 6 to 16 inches, with 8, 10, and 12 inches also being used. Branch lines providing service to individual homes, offices, buildings, and businesses vary in size from as small as half an inch in diameter up to 6 inches.
Are bathroom sinks universal?
Bathroom sink faucets are not the same size and are not designed to fit all sinks universally. That said, excluding specialty built custom work, bathroom faucets are regularly manufactured in one of four different spacing configurations to accommodate the most common and popular faucet types: Single-Hole.
What size is standard sink waste pipe?
Common Waste Pipe Sizes in the UK
21.5mm – This is used for overflows and is typically seen attached to water tanks in lofts and from cisterns. 32mm – Found under small hand basins and other low volume outlets. 40mm – Used under kitchen sinks and also bathroom showers/baths.
How do I know what size sink plug I need?
To determine the right size of plug, you need to measure the diameter of the drain mesh or the underside of your current plug. Then you’ll be able to shop for the style of sink plug you want and be able to choose the right size the first time.
Are all sink plug holes the same size?
There is no universal drain hole diameter that applies to every bathroom sink, but 1 1/2 inches is the most common size for a bathroom sink drain opening, according to Signature Hardware. Some bathroom sinks have a slightly narrower opening at 1 1/4 inches, while others are a bit wider at 1 5/8 inches.
How do you measure a drain plug?
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
What size pipe is used for toilet waste?
The standard size of a toilet drain pipe is 3 inches in diameter, but the drain can be up to 4 inches in diameter. The drain pipe is usually connected to a 3-inch schedule 40 toilet drain pipe.
How many toilets can be on a 3 inch drain?
There is one answer. The International Plumbing Code requires 5 Drainage Fixture Units in a bathroom group. It’s good for 20 DFU’s or 4 bathroom groups.
Can a drain pipe be too big?
Oversized waste pipe can cause more problems. If the pipe is too big the water will run around the solids and not push them. That causes the solids to sit in the pipe and either harden and clog the drain or it can rust and deteriorate the pipe if it’s not PVC.
Can two toilets share the same drain?
In answer to the question, yes, two toilets can share the same drain line but not the same drain hole.
What is a standard size sink hole?
While not all faucets are the same, the standard sink faucet hole size is 1 3/8 inches. For some, a 1 1/2-inch hole may be required. If the faucet is a three or four-hole faucet, you’ll need holes 6 or 8 inches across your kitchen sink. Widespread faucet hole spaces can be as wide as 16 inches.
How do you measure a P trap for a bathroom sink?
If you have 2.5 inches from the bottom of the tailpiece to shelf and 0.5 inches from the drain to shelf you can use CP-trap. First you have to cut 2.5-2.0 inches from the end of the tailpiece. The height of the p-trap is 4.5 inches 5-2.5=2.5 inches or 4.5-2.5=2.0 inches.
How do I know what size water pipe I have?
How To Determine Pipe Size Using The String Method – YouTube
What pipe should I use for water main?
Schedule 40 PVC or copper is the best way to go with water mains.
What is the best pipe for main water line?
Both copper and PVC have their uses in modern water distribution systems. Copper, on one hand, is a strong, yet flexible metal that is often the first choice for home plumbing. Professional plumbers and contractors often use copper because it can be used to form pipes with thin but strong walls.