A gravel board is a wooden, concrete, or composite board usually around 140-150mm in height.
What size do concrete gravel boards come in?
Types of Concrete Gravel Boards
Depending on how high you wish to raise your fence panel, our concrete gravel boards come in 6 inch and 12 inch options. We also stock concrete gravel boards in a variety of different finishes depending on your cosmetic preference.
What height are gravel boards?
Gravel Boards
With a height of about 6 inches (150mm), a gravel board can legally be used with any size of fence panel. As well as increasing the height of a fence, they provide other important benefits.
What length are gravel boards?
The main lengths are most common. 1.8, 1.83, 2.1, 2.4, 2.7, 3.0 and 3.6 metre long. Thats 6, 7, 8, 9, 10 and 12 foot.
Should concrete gravel boards touch the ground?
CONTINUE READING BELOW
Normally you would leave a 75 – 100 mm gap between the ground and the cladding if no gravel boards are used (generally applies to steel palisade, feather edge and close board fences).
How much does a concrete gravel board weigh?
This concrete gravel board slots neatly into concrete slotted posts to raise the fence panel off the ground by 150mm. Weighs approximately 26kgs.
…
Specifications.
| Type | Recessed Concrete Gravel Board |
|---|---|
| Brand | Supreme |
| Dimensions | 50mm x 150mm |
| Length | 1830mm (1.83m) |
| Weight | 26kg (Approx.) |
Can you cut gravel boards to size?
Cut the boards to size with an angle grinder fitted with a diamond disk. Make sure you have a diamond-studded blade or another disk that works on concrete. To use the angle grinder, hold onto it with both hands and move it slowly along the board. Cut across the boards first to trim them to the proper length.
How deep should gravel boards be?
Dig your hole to the correct depth, allowing for the height of the fence panel and the gravel board. As a rough guide the hole should be a minimum 1/3 the height of the fence, so a 6 foot fence would need an 8 foot post in a 2 foot deep hole. Similarly, the hole should be three times the diameter of the post.
How long do concrete gravel boards last?
How long a gravel board lasts really depends on what it’s made from. If it’s made from untreated timber then the best you can expect is probably a few years tops and it will need replacing. If their constructed using good quality pressure treated timber then you can reasonably expect anything up to 7 or 8 years.
How thick is a gravel board?
Gravel Board 3.6M x 38mm x 150mm.
What is a concrete gravel board?
A gravel board is a wooden, concrete, or composite board usually around 140-150mm in height. They’re positioned underneath your fence panels and sit on top of the ground to protect your fence against wet soil, debris, and insect damage. Essentially, gravel boards are used to improve the lifespan of your fence.
What are concrete gravel boards made of?
Gravel Boards are usually made out of either concrete or timber, however, we believe that the former material is far superior. This is because concrete lasts far longer and is essentially maintenance-free. Concrete acts as a stronger foundation for your fence panels, as it’s sturdier and more durable in severe weather.
What size are timber gravel boards?
Wickes Treated Timber Gravel Board – 19mm x 150mm x 1.83m Pack of 5. Delivery exclusions apply. Gravel boards are the protective barrier between the ground and your fence.
How do you lay a concrete gravel board?
Concrete Gravel Board Fencing Install – YouTube
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
Are gravel boards good as a retaining wall?
But are gravel boards good for retaining walls? The short answer is yes. … Gravel boards are often used as a way to create a decorative screen, or they can be used to hide unattractive sights.
What is a recessed concrete gravel board?
Recessed concrete gravel boards increase the life expectancy of fencing projects by raising fence panels from the soil to avoid the risk of rot and damp damage. They also prevent soil and gravel from moving under panels. The recessed rectangle design of these boards makes them a great feature in linear-style gardens.
How much does an 8ft concrete fence post weigh?
The 8ft long (2.440m) intermediate post has a section size of 94mm x 109mm and weighs approximately 44kgs.
…
Specifications.
| Type | Concrete Slotted Intermediate Fence Post |
|---|---|
| Length | 2440mm (8ft) |
| Weight | 44 kg |
Are concrete gravel boards reinforced?
Recessed Concrete Gravel Boards are used to keep the panels off the ground, which helps them avoid rotting. These gravel boards are reinforced with steel for extra strength.
Can you drill concrete gravel boards?
Yes, you can drill through concrete gravel boards with relative ease when using the correct tools and techniques. Hammer drill, rotary hammer and masonry drill bits are the preferred choice for drilling into concrete. Fencing is a frequently occurring project that requires the use of concrete gravel boards.
How do you fit gravel board clips?
You simply slot the cleat pins into the bottom holes of the mortice post, and then bolt the gravel board onto the cleat using an M8x80 bolt, nut and round washer together with a plate washer on the concrete face.
How do you fit concrete fence posts and gravel boards?
How to erect a fence with concrete posts – YouTube
How do I keep my gravel boards level?
There are three methods you can use:
- With slot-in fence posts: make sure the posts are secured for the correct distance for your panels. …
- With clips: install the clips into the centre width-ways of your fence post at the height you require. …
- With wooden blocks: Make some wooden blocks out of pine or cedar.
How do you lay a concrete gravel board on a slope?
Steps for Installing Concrete Posts on a Slope
- Start at the top of the slope and work downhill. …
- Dig a hole for each post to a minimum of 600mm deep. …
- Use either a ballast and cement mixture or post mix concrete to install cement fence posts.
- Slot concrete gravel boards into each concrete post.
How many bags of Postcrete do you need per post?
“Usually one bag of postcrete per post is enough, however you can use a two bags per post if you feel this is needed.
Do gravel boards have steel in them?
Concrete Gravel Boards / Concrete Base Panels
Rock face base panel’s have 3 steel reinforcing bars and have a decorative rock faced finish. They come in 2 sizes: 6′ x 1′ or 6′ x 6″.
How can I make my gravel board look nice?
How to rejuvenate concrete gravel boards. – YouTube
Can you paint concrete gravel boards?
But is it even possible to paint concrete garden posts in the way that you would paint a wooden fence post? The answer is yes, it is indeed possible to paint concrete garden posts. It’s also a great way to give a new look to your garden posts.
Can you use gravel boards as decking?
Many professional and self-made builders agree that gravel is the perfect material to place under your deck. How can you put gravel as your deck’s base? First, you will need to prepare the installation area and dig a few inches out. Then, you’ll need to cover the area with landscaping fabric.
Can you use gravel boards for raised beds?
Gravel boards (they form the base of some fences) will do the job well. See point 1 at the end of this article if you want a higher raised bed. 2. One fence post or similar wood measuring 1.8m x 10cm x 10cm (6ftx 4in x 4in).
How thick should a fence board be?
Pickets are the vertical boards that make up the finished surface of a fence. They are typically 1/2″ – 1″ thick, by 4″ – 6″ wide. Rails are the horizontal members to which the pickets are fastened. They are commonly 2″ thick by 3″ – 4″ wide.
Do you have to have gravel boards for fencing?
Are gravel boards necessary? Installing gravel boards will increase the durability of your fence panels and save you money in the long run. … Gravel boards will also protect your fencing from damage from lawn mowers, spade or fork work, and ball games.
What size are concrete fence posts?
Post length 7ft9 which is for an overall fence height of 6 foot. Post length 9ft which is for an overall fence height of 7 foot. Post length 10ft which is for an overall fence height of 8 foot.
Are concrete gravel boards strong?
Gravel board stockists in London
Gravel boards are essential for a strong fence, as they provide a secure base for the fencing panels to stand on. Wooden gravel boards can work aesthetically by keeping the fence all one material and they can be recycled easily too, but concrete is the most secure option.
What is DuraPost?
DuraPost® is a complete fencing system of steel fence posts and caps, corner posts, gravel boards and capping rails that can be used with both prefabricated fence panels and close board fencing with Arris, Cant or 3×2 rails.
Can you make a fence out of gravel boards?
While it does contrast with closeboard or wooden fences panels, you can team concrete gravel boards with concrete fence posts to create a strong, secure, and low maintenance fence for your home or business premises.
How do you use Postcrete mix?
How to use Postcrete – YouTube
How deep should a 8 foot fence post be?
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
How do you set a gravel post?
The process is very similar to setting a fence post in dirt. You need to dig that one-third deep hole with your clam digger, then put a layer of gravel at its base. Put the post in the hole, make sure it’s straight (again, this is ideally a two-person job), and then backfill with more gravel.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How tall should a fence be for a 6-foot fence?
As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground.