Curtain eyelets are available in four sizes to suit all curtain pole diameters, they are 25mm, 40mm, 50mm and 66mm.
What size are the holes in eyelet curtains?
The diameter of the inside of an eyelet ring (or grommet) is normally 40mm. The ideal diameter of a metal curtain pole for eyelets is 28mm. So if your pole is 28mm diameter or slightly smaller then it will be fine for your eyelet curtains.
How do you measure eyelets for curtains?
How to Measure for Eyelet Curtains – CurtainsCurtainsCurtains – YouTube
What size are curtain rings?
Choose a drapery ring with an inside diameter ½ inch larger than the diameter of the pole or rod. For example, if you have a 1-inch diameter rod, the appropriate ring will have an inside diameter of 1 ½ inches. A ring with a smaller inside diameter will make it difficult to move the drapery along the rod.
How do you measure eyelet size?
Simply measure between the finials (the decorative ends) to obtain the width. Drop: The inner edge of the eyelet is set down 3cm from the top of the curtain so you need to allow for this when measuring or your curtains will be 3 cm too short!
How do you measure poles for eyelet curtains?
How to Measure Eyelet Made to Measure Curtains On A Pole
CONTINUE READING BELOW
What is a standard eyelet size?
Grommet and Eyelet Sizing Chart
| Size | Outside Diameter (in millimeters) | Inside Diameter (in millimeters) |
|---|---|---|
| #1 (5/16″) | 17.5mm | 7mm |
| #2 (3/8″) | 19mm | 9mm |
| #3 (7/16″) | 22mm | 12mm |
| #4 (1/2″) | 28mm | 15mm |
How much gather on eyelet curtains?
– An eyelet curtain will usually have 2 x fullness = 100% of the track width. – A pinch pleat curtain requires more fabric to sew in the pleats as it gathers up tighter. As such you will require 2.5x the track width or 150% fullness.
How much space should be between eyelets?
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge. If there is a window frame, blinds or shades on the window, you will want the spacing to clear what is behind the rod.
How do you put eyelet rings on curtains?
How to Make Eyelet Curtains : Making/Modifying Curtains – YouTube
What size rings for 28mm pole?
The rings have a 42mm (1 5/8″) internal diameter which is ideal for 28mm (1 1/8″) diameter poles as it ensures the curtain rings will not snag on the pole while you pull them to operate your curtains.
How many rings do I need for curtains?
Calculating Curtain Ring Needs
One ring goes at each pleat to hang the panels securely. For flat panels, you usually need one ring for every 4 to 8 inches of curtain rod length. Heavier drapes need more rings that are closer together, while lightweight fabrics are usually fine with rings every 7 or 8 inches.
Is the width of curtains per curtain?
The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How big should a curtain pole be?
We recommend that the track or pole sits 15-20cm above your window, and be wider than your window by 15-20cm on either side. If you have a track or pole already fitted, ensure you measure the full length.
How much wider Should a curtain pole be than the window?
To make sure you achieve the perfect fit, measure the recess width of the window and then add at least another 15cm for each side. How much should a curtain pole overhang? We advise that your curtain pole is 30cm longer than your window is wide (15cm on each side).
Can eyelet curtains go on any pole?
In theory all poles can be used for eyelet curtains, however they do tend to glide more smoothly and are more popular on a metal curtain pole. You can purchase some curtain poles specifically for eyelet curtains and rings are not supplied.
Are eyelet curtains common?
Eyelet curtains are the most common style of ready-made curtain. They can be easily purchased from a number of furniture stores and are usually pretty inexpensive. They’re simple to use, and pretty hard to get wrong.
Are there different size grommets in curtains?
Deciding which one you need depends on the tools you have and the look you want for your curtains. … We offer two sizes (2-inch and 1-9/16-inch) of metal curtain grommets in four colors: nickel, black, brass and antique finish. Metal curtain grommets are suitable for any weight of curtain fabric.
Are grommets and eyelets the same?
Grommets are very similar to eyelets, because they are used to reinforce a hole as well, however, grommets are typically used for more heavy duty material than eyelets. They may also be used to protect an apparatus from the sharp edges of the hole, to prevent damage to the gadget.
Does it matter if curtains are too wide?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How do you keep eyelet curtains evenly spaced?
Quick Tip | NO COST DIY Perfect Curtain Hack – YouTube
Where do you put grommets in curtains?
Using a ruler, mark the center position of each grommet on the back of the curtain. For large grommets, the center position should be 21⁄4″ from the top of the curtain. For medium grommets, the center position should be 2″ from the top of the curtain.
How do you sew lined eyelet curtains?
How to Sew Lined Curtains | National Sewing Circle – YouTube
How do you put curtain rings on curtains?
Hanging Curtains Using Ring Clips (easiest method)
How do I fix curtain rings to curtains?
How to hang your curtains perfectly – YouTube
How do you attach a ring clip to curtains?
3 Ways to Hang Curtains With Clip Rings by Country Curtains – YouTube
How do you measure the diameter of a curtain pole?
You’re measuring from the end of the inside mark to the far edge of the paper to get the circumference of your pole. You should be able to measure to the nearest half millimeter.
How far apart are curtain rings?
I like to space ring clips approximately four inches apart so that there is a handsome fold between each clip in the drapery panel. Start by clipping each end of the panel. Next, clip the middle. Finally, space the clips evenly apart as close to 4 inches as possible.
How many inches do curtain rings add?
If you want a little bit more length out of your panel, ring clips are a great way to add 1-2 inches, since the clips means the fabric hangs just below the drapery rod.
How do curtain rings work?
But you may be wondering how exactly drapery rings work. It’s actually quite simple. You just hang them from a metal pin that’s in the back of the drapery. Some drapery rings also have built-in clips, allowing you to hang the drapes without needing to insert pins into the fabric.
How many eyelets are in a meter?
How many eyelet rings do i need? When placing the 36mm Eyelet Rings we recommend 9 rings per metre (approx. 2 times fullness) but don’t forget when calculating how many rings you require, you should always add up to an even number for each curtain.
How wide should I buy my curtains?
To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.
How wide should curtains be for 60 inch window?
For example, for a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.
How wide should curtains be for 48 inch window?
Curtain Width Guide
If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.