What size are scaffold boards?

The standard size for a new scaffold board is a thickness of 38mm, a width of 225mm, and lengths going up to 3.9m (13ft). As timber goes, scaffold boards are fairly “chunky”, which is what gives them a wonderfully rustic and industrial aesthetic and feel.

How wide is a scaffold board in inches?

Length available: 8ft, 10ft, 13ft. Thickness: 38mm (1.50 inches). Width: 225mm (8.86 inches).

What size are scaffold boards UK?

With a standard dimension of 225mm wide by 38mm thick, all boards are available in lengths from 1.8m to 3.9m. Grade A and BSI British Standard boards are visually graded (marked VG) or machine graded (marked MG) and marked with the manufacturer’s code for traceability.

What type of wood is used for scaffold boards?

Wood, such as fir or pine, is the most common material. High-quality wooden planks, such as Kennison Forest Products solid sawn scaffold planks or sure-lam LVL (laminated veneer lumber) scaffold planks, provide durable, safe planking solutions.

What is the minimum width of a scaffold plank?

1 Minimum width The minimum width of a scaffold plank shall be 220 mm. For timber planks, the minimum width shall be at a moisture content not exceeding 15 percent.

How wide is 3 board scaffold?

Boards provide a working surface for users of the scaffold. Traditionally they are seasoned wood and come in three thicknesses (38 mm (usual), 50 mm and 63 mm) are a standard width (225 mm). The timber board ends are protected by metal plates called hoop irons or sometimes nail plates.


How wide is a 5 board scaffold?

Specification:

Info Detail
Length 1.5M
Width 225mm
Thickness 36mm
Weight 7KG

Can you use scaffold boards for decking?

Unless you’re certain they’re treated (and yes, you can buy treated scaffold boards!), in order to use them outside long-term, you will need to treat them. And if you don’t and they’re not treated, well don’t expect them to hold up for nearly as long as decking would.

Why do scaffold boards have end bands?

The end bands must be present at both ends of the scaffold board to protect the vulnerable end grain of the boards. They should extend around the edges of the board by at least 150mm for 38mm boards and at least 100mm for 63mm boards. Fungal decay, usually wet rot, is common in poorly stored scaffold boards.

Can I use scaffold boards for raised beds?

Raised beds are ideal for fruit and vegetable growing because maintenance is easier, as you don’t need to dig, and the soil doesn’t get walked on and compacted. A robust raised bed can be constructed from interlocking scaffolding boards, which look attractive and are inexpensive.

Are scaffold boards Pine?

This wood is selected over wood grown in the UK such as Sitka Spruce and Scotts pine as it is the correct size and has superior structural integrity, which is inherent in the trees genetic make-up.

Do scaffold boards rot?

Fungal decay, usually wet rot, is common in poorly stored scaffold boards. Wood is vulnerable to attack when the moisture content is over 20%. It can be detected by discolouration of the wood, which also becomes softer.

How do you make scaffold boards look rustic?

How To Make Scaffold Board Shelves – YouTube

Can I erect my own scaffolding?

Who can put up scaffolding? You must use a builder or scaffolding contractor who is trained and competent to put up scaffolding. This means they need to have the necessary skills, experience and knowledge to manage health and safety.

At what height must you start tying off a scaffold?

These standards state that these guys, ties, and braces must be used when there is a 4:1 height ratio (beginning at 20 feet) for supported scaffolds.

How thick is a standard scaffold board?

The standard size for a new scaffold board is a thickness of 38mm, a width of 225mm, and lengths going up to 3.9m (13ft).

How wide is standard scaffolding?

Single Wide Scaffold is approximately 29 inches wide so it can roll through standard doorways. Perfect for work in congested or narrow areas. Available in 6, 8, or 10 ft lengths. When properly braced extension sets can be added to increase the height of Single Wide Scaffold.

What are scaffolding sole board?

Sole Boards. Soleboards are either hardwood timber planks or LVL timber planks used under Scaffold standards to provide greater load bearing capacity. These are great to use on less stable ground such as dirt or gravel.&lt,br /&gt,

How heavy is a 8ft scaffold board?

Specification:

Info Detail
Width 225mm
Thickness 36mm
Weight 11KG
Specification BS2482

How many boards wide can a scaffold be?

Board Brackets

Such brackets may be used within TG 20 compliant independent scaffolding provided that the inner platform at a maximum of one lift is so extended per elevation of scaffolding. The remaining inside platforms should be up to two boards wide unless design advice is obtained.

How thick the scaffold plank timber should be?

Usually made from sawed timber, planks are usually more than 11⁄2 in (38 mm) thick, and are generally wider than 21⁄2 in (64 mm).

How far can a scaffold board span?

Support span – 1.2m max (for visually or machine graded boards 38 x 225). – 2.5m max (for visually or machine graded boards 63 x 225).

Do scaffold boards warp?

We make furniture from all sorts of traditional furniture making timber (which need no explanation)… but the reclaimed scaffolding boards, which have become a big trend recently, are unusual and need a bit of explanation, so here goes…. They are always warped and twisted

Can you sand scaffold boards?

The sanding process

As with most used scaffold boards there’s likely to be spilt build materials splattered all over them, if so, you can probably just scrape these off with a wallpaper scraper or chisel. Sanding can be completed before or after joining the boards.

Can scaffold boards be left outside?

Scaffold boards are designed to be used outside all year round so they make a great sturdy table top. They can be painted any colour, stained or waxed to match the existing wood finishes in your garden.

Are scaffold boards waterproof?

Rough scaffolding wood treated with Woodcon for a water-repellent surface. Woodcon settles around the fibers of the wood and makes the scaffolding wood of your planter completely waterproof, all thanks to an transparent coating in-and-on the wood surface.

Can you burn scaffold boards?

Reclaimed scaffold boards charred using the Japanese ‘Yakisugi’ technique, where all sides of the boards are burnt. This process shrinks the cells of the wood, making it less permeable to all the factors that can damage it over time, including rain, wind and heat.

Are scaffold boards softwood or hardwood?

Although it is softwood, scaffolding wood comes in thick planks that make sturdy furniture. If it is not treated with glues, finishes and paints, scaffolding wood can be recycled into engineered wood products or fuel.

Are scaffold boards cheaper than decking?

Scaffolding boards are inexpensive softwood which can be easily bought anywhere. They are generally twice as wide than a traditional decking boards which to me is much more striking.

How long do scaffolding planks last?

Each board measures 228mm (9 inches) wide and 38mm thick (1.5 inches), and have a rough cut finish (so final sizes can vary slightly from board to board).

Specification:

Info Detail
Length 3M
Width 228mm
Thickness 38mm
Expected Life 5 – 10 Years

Are scaffolding planks pressure treated?

These are new scaffold boards which are freshly sawn by a machine, they are brown pressure treated to ensure their longevity. The boards are not banded. They are in great condition and can be creatively used.

How do you join scaffold boards together?

How To Build a Scaffold Board Table &amp, Prevent Cupping – YouTube

Can you use scaffold boards for flooring?

A cheaper option for flooring are used scaffold boards, at a fraction of the cost of reclaimed floorboards you get a lot more coverage for your money. With a bit of DIY knowledge, time and money and elbow grease the results are great.

How much weight can a scaffold board hold?

The maximum safe working load of a scaffold board is 150 KG evenly spaced. The total weight of the user and tools must not exceed this. When moving to a new site, carry the equipment with care.

How do you finish a scaffold board?

It’s also easy to apply – simply brush it on and remove excess with a rag. In particular with scaffold boards, which can be rougher or more textured than other timber items, danish oil applied with a brush is much better at getting in to and penetrating this type of surface, whereas wax and varnish may not be.

How do you keep scaffold boards from splitting?

Prevent Your Boards From Splitting- STOP Cracks in Their Tracks!

What should I treat scaffold boards with?

Once sanded down you should fix the boards to the cabinets using fittings and then use wood glue to fill in any cracks or small holes in the timber, then it’s worth giving the boards another sand over and then treat them with wood oil and clear varnish. The finished product will be nothing more that superb!

Are scaffold boards kiln dried?

Kiln Dried Scaffold Boards are de-moisturised to prevent warping, which makes them ideal for scaffolding in boiler rooms &amp, high temperature environments. All kiln dried boards are available in the following standard sizes: 3ft. 4ft.

How do you keep scaffold boards from warping?

The “correct” procedure is to let them acclimatise/dry. warp, and then plane them straight before using them for any kind of joinery. Depending on the thickness and length, it might be possible to use some kind of mechanical means to stop the warping… but then you run the risk os the wood splitting as it drys.

How do you age a new scaffold board?

How To Make New Wood Look Old &amp, Rustic – YouTube

Can I erect scaffolding on Neighbours property?

A There is no general legal right allowing neighbours to put scaffolding on someone else’s land. Generally, scaffolding put up without permission is a trespass. In fact, a trespass may occur even without any scaffolding being on the land itself.

Is it legal to work on a roof without scaffolding?

Much of the official health and safety advice states that, for any domestic roof repairs, scaffolding is needed. But scaffolding can seem unnecessary for small one-man jobs, so in these cases, it is often considered perfectly acceptable to use a ladder that is safely secured.

Who can erect scaffolding?

A. Scaffolds should be designed, erected, altered and dismantled only by competent people and the work should always be carried out under the direction of a competent supervisor. This is a requirement of the Work at Height Regulations 2005.