Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How wide should my curtain panels be?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
How do I know what size curtains to buy?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
How wide should curtains be for a 36 inch window?
According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across. If you’re making your own curtains, remember to add a couple inches so you can finish, or hem, the sides.
How wide should curtains be for 100 inch window?
How Wide Should Curtains Be For A 100-Inch Window? The average curtain bought to hang on a 100-inch window should measure between 200 and 250 inches wide. To achieve appropriate fullness with thinner material, get curtains upward of 300 inches wide.
Should I use one or two curtain panels?
If you have larger windows, you may want to consider two curtain panels. They do fit better in the window, requiring a little less material than a single panel. It can sometimes be cheaper buying two smaller panels than one larger one. The double panels can also look better for larger windows.
CONTINUE READING BELOW
How much wider Should curtain rods be than the window?
Additionally, be sure to choose a curtain rod that’s wider than your window. This allows curtains to be pulled completely to the side of the window and gives the appearance of a larger space. The rod itself should be 8 to 12 inches longer than the width of the window, which allows for 4 to 6 inches on either side.
Are curtains measured per panel?
So for a 46 inch wide pole you will need a pair of curtains, with each panel measuring 46 inches wide. That way the two panels combined will be double the pole width to give you the required fullness.
…
| Track/Pole Width | Recommended curtains width (each) |
|---|---|
| 90″-132″ (220-335cm) | 132 inches (335cm)* |
How many curtain panels do I need calculator?
Determine the number of panels you need to order: ~ Multiply window width by 1.5 to 2 if you want curtains loosely gathered for a relaxed, tailored look. Divide your total by the width of a single curtain panel to get the number of panels you need.
What is curtain panel?
Curtain panels or drapery panels are both stationary side panels that frame a door or window. Commonly used to frame blinds, shutters or shades in the window, or on either side of a doorway between rooms. This window treatment can make a design statement in the room.
How many curtain panels do I need for a picture window?
Draperies should be 2 1/2 to 3 times the width of the window. With double windows, plan on using at least two panels per window or four panels for a double-width picture window.
Can you put one curtain panel on a window?
Yes, you can use just one curtain panel. This is sometimes called single panel curtains. Individual panel curtains work exceptionally well for sliding doors or smaller windows. Most people consider two curtain panels to have a “fuller” or a more finished look, but using a single panel gives a room a unique feel.
How far below the window should curtains hang?
While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.
How wide should curtains be for 60 window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How wide should curtains be for 120 inch window?
For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.
Why are curtains sold as one panel?
Practical. Curtain panels are sold as individual panels because there are some instances in which a person only needs one panel. Maybe the cat mistakenly scratched one curtain panel to shreds and it now needs to be replaced.
How high should you hang curtains with 9 foot ceilings?
In Closing. For a 9-foot ceiling, 96-inch curtain panels are typically a good fit. This allows you to hang curtains that reach the floor, with the rod placed one foot from the ceiling. If you prefer curtains that pool on the floor or curtains that hang higher, just pick the next size up.
Are tab top curtains out of style?
Tab top curtains are an excellent choice for many homes because they‘re unlikely to go out of style and are versatile.
How do you hang curtains to make a room look bigger?
Hang the Curtains as High as Possible
In order to make your window and the whole wall seem higher, put the curtain rod as high above the window as possible. Attaching the rail close to the ceiling tricks the eye into believing the wall is bigger. Thus, it visually expands the whole room.
How much should a curtain pole overhang?
For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again.
How far should a curtain pole extend past window?
General Installation Recommendations. When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
What does 1 curtain panel mean?
It means there’s only one side! Like you see in the picture it showed two curtains 1 panel means you only get one side. So if you’re looking to part them in the middle like in the picture you’ll need to buy more then one panel. … It means only one curtain.
How many grommet panels do I need?
Make sure that the fullness of your curtains is about twice the width of the window. So if your window is 50” wide, you will want 100” of panel curtains. It is important to keep your window balanced. So if you put two panels on one side, then put two panels on the other side as well.
How do I calculate curtain material?
There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
What is curtain panel size?
Curtain measurements are always written with the width first and then the length. For example, a panel that is 46″ x 54″ is 46 inches wide and 54 inches long. Don’t buy your curtains just so they’re big enough to cover a window.
What does 84 panel curtain mean?
The sizes are listed width by width. The curtain panel is 54 inches wide by 84 inches long. Before choosing curtains, it is advisable to install a curtain rod.
What does a curtain panel look like?
A panel is a length of fabric, hemmed at the bottom, that hangs in front of a window. It may be tab- or tie-topped, have grommets, be one of two panels that form a set of curtains that cover a window when pulled closed, or be a fixed, flat panel of cloth over the window.
Can you put 3 curtain panels together?
Pull back two adjacent panels of the three curtains into a tie-back, creating a left-to-right or right-to-left swoop on the window, depending on your window hardware. Let the third curtain hang gracefully down the other side of the window or gather it with a tie-back of its own.
How do you hang 4 panel curtains?
How to Hang Drapery Panels – YouTube
What is a double panel curtain?
Double panel curtains are the most common style, and consist of two hanging curtain panels. This style works well for large windows (think: bay windows, picture windows, and arched windows) or even as a way to filter light around a set of glass doors.
How do you tie back a single panel curtain?
8 Creative Curtain Tieback Ideas | A Country Sampler DIY Video
Is it OK if curtains don’t touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
Are bedroom curtains supposed to touch the floor?
So should curtains touch the floor? The short answer is yes… usually. But when making any decision about your window treatments, whether they’re drapes, blinds, or shades, it’s important to consider every aspect of style and function so you can choose the best option for your windows and your home.
Should curtains sit on window sill?
Sill-length curtains stop at the bottom of your window, or a few centimetres further down. They can be the best style for window seats and large window sills, or for rooms where the radiator is situated directly underneath the window. They are best suited to informal, country-style homes and children’s bedrooms.