Standard widths for vanity cabinets are 24, 30, 36, 48, 60 and 72 inches, however, you may find some in-between sizes out there. The standard depth of a vanity, from front to back, is typically between 20 to 21 inches. However, there are narrow depth options available which are usually 18 inches.
What size vanities do they make?
Standard vanity dimensions are typically between 18″ – 72″ wide. For a single vanity, the most popular widths are 24″, 30″, 36″, 48″, and for double vanities the most popular widths are 60″ and 72″, but start at 48″. The standard depth of a vanity is typically around 20″, but narrower options are available.
How do you measure for a bathroom vanity?
You can use a tape measure to get the general dimensions of your bathroom vanity. Take a measurement at the widest part of the variety in contact with the the floor, which is your base width. Then, measure across the countertop, which is your top width.
What sizes do vanity sinks come in?
Sink Size and Shape
Most round bathroom sink bowls are 16 to 20 inches in diameter, while most rectangular sinks are 19 to 24 inches wide and 16 to 23 inches front to back. The typical basin depth is 5 to 8 inches.
What is standard bathroom vanity height?
It’s so hard to make everyone happy. Traditional vanity heights in older homes range from 30 to 32 inches up from the floor. The modern trend is toward higher vanities, up to around 36 inches. For reference, that’s the standard counter height for kitchens.
CONTINUE READING BELOW
What is comfort height vanity?
Comfort Height Bathroom Vanities Reach 36” Tall. If you haven’t done a bathroom remodel in years, you’ll notice that vanities have gotten taller. They used to be around 32″ tall, and now they’re 36″ to match the height of kitchen countertops.
How much space should be between vanity and toilet?
Toilet placement
A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″.
How wide should a vanity be for 2 sinks?
Typically, the best size for a double vanity is 72 inches wide. This is large enough to comfortably accommodate both sinks while still moderate enough to fit in most bathrooms. Additionally, 72-inch vanities usually provide adequate storage space.
What size vanity top do I need?
If you’re purchasing a vanity without a top, you’ll also need to measure for the countertop. Measure the width and depth of the vanity cabinet. The vanity top should be 1 inch wider and 1 inch deeper than the vanity cabinet. Be sure to include allowances for fillers, if you plan to use them.
What size bathroom sink fits in a 24 inch cabinet?
If your vanity is 24-inches wide, look for a sink no more than 16-inches long to get at least four inches of counter space per side. The maximum sink length (or diameter) you can get is 22 inches, but this will leave no usable counter space.
Is a 25 inch sink big enough?
Experts recommend at least 22 to 27-inches in length, which also works for small kitchens. Length is one factor, but you also have to consider the depth of the sink. Kitchen sinks should be at least 7 to 7.25 inches deep, anything less and your dishes will quickly pile up and reach the faucet.
How big is a small bathroom sink?
Common Bathroom Sink Sizes
Small: From 15 to 20 inches long and nine to 12 inches wide, with a depth between 5-3/4-in. and seven inches. Medium: From 20 to 30 inches long, 19 to 24 inches wide and about seven inches deep. Large: From 30 to 50 inches long, 19 to 24 inches wide and about five inches deep.
Are bathroom vanities the same height as kitchen cabinets?
The standard height for kitchen cabinets is 34 inches high. Bathroom cabinets come in a little shorter, typically at 31 inches. These cabinets are also shallower, with a standard depth of 21 inches, versus 24 inches for kitchen models. These differences affect more than just the storage space available.
Why are bathroom counters so low?
The Shift Away from Standard Height Vanities
Most new bathroom cabinets are raised to promote a more healthy posture. Kitchen countertops were designed to be at the hip of normal adults to make kitchen prep easy. The only reason bathroom counters were lowered was to make the sink accessible for small children.
How high should outlets be above vanity?
A typical bathroom counter is 32 to 36 inches above the floor. A bathroom counter usually has a 4-inch backsplash, where the counter surface turns up the wall. Backsplashes prevent water from running behind a countertop. An electrical outlet receptacle is usually placed 2 to 3 inches above the top of the backsplash.
What is standard countertop height?
The Standard Counter Height
Kitchen – The standard kitchen counter height is 36 inches (3 feet) above the floor. Kitchen islands designed for bar-style seating can climb as high as 42 inches.
How high should kitchen cabinets be from countertop?
The standard height for upper cabinets from the counter is 18 inches, or 1 foot and 6 inches. They shouldn’t be less than 15 inches away or more than 20 inches away. This also means the height to where the bottom of your upper cabinets starts. This gives enough space to put things like toaster ovens and blenders.
How high should cabinets be from countertop?
“The standard distance is 18 inches” from the top of the counter to the bottom of the wall cabinet, Scott says. “But we subscribe to the Scandinavian design aesthetic, and we often put cabinets higher—say, 24 inches above the counter, or even more. That creates a sense of openness and light.”
Can you replace a 10 inch rough in toilet with a 12 inch rough in toilet?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
How close can a vanity be to a tub?
When deciding on placement, make sure there is at least 30 inches of floor space between the vanity and tub. The National Kitchen &, Bath Association recommends a minimum of 30 inches of clear floor space alongside a tub. It also recommends a minimum of 30 inches by 48 inches of clear floor space in front of a sink.
Should a bathroom door swing in or out?
Most contractors and home builders follow an unwritten rule that bathroom doors should swing inwards in both commercial and residential buildings. This design maximizes privacy, safety, and odor control while also ensuring that hallways are not blocked.
Is 60 inches too small for a double vanity?
When looking for a double vanity that can be used by two persons comfortably at the same time, you should consider having around 30 to 36 inches of space per person. This means double vanities that range from 60 to 72 inches in size are the best ones as they offer ample space and ensure utmost comfort.
What is the smallest vanity for a double sink?
If you do the math, that calls for a minimum of 60 inches, or 5 feet of wall space. And 5 feet really isn’t enough for comfortable, simultaneous use of both lavs. Six feet is a real-world comfort minimum, with 36 inches between lav centers.
How long should a vanity be for a double sink?
Double sink vanities, on the other hand, usually measure 60 to 72 inches. There are some 60 to 72 inch vanities that also come in a single sink version.
How do you measure for a vanity top replacement?
Measure from front edge to back of your existing top, or add one inch to the depth measurement of your top-less cabinet. A common bathroom vanity size is 21D inches, which would mean a 22D-inch top.
What size mirror should go over a 30 inch vanity?
What Size Mirror Should I Use Over a 30-Inch Vanity? For a 30-inch vanity, the maximum width of your bathroom mirror should be between 24 and 28 inches wide. This leaves you with 2 to 4 inches of space on each side of the mirror.
Can a 22 inch sink fit in a 24 inch cabinet?
The average 24″ sink base cabinet comfortably accommodates a standard 22″x30″ sink, be sure to consider the depth of your sink when planning storage inside the base cabinet.
Can you put a 30 inch sink in a 36 inch cabinet?
For example, a 36″ cabinet can accomodate a 30-32″ sink. Next, measure front to back to find cabinet depth (standard cabinets have a 24″ depth). If your countertop has a backsplash, subtract its thickness from this figure. In general, most cabinets can accommodate a sink that is 20 inches front to back.
What size sink fits in a 36 cabinet?
A typical 33-by-22-inch sink will fill a 36-inch base cabinet. If you’re replacing a sink, make sure it fits the existing cutout.
What is the most common kitchen sink size?
The most common sizes for a kitchen sink are 30″ or 33″, however a standard size could measure anywhere between 24″ and 36″ in length. The bulk of what you find while shopping will fall within this size range. Generally, sinks up to 30″ will contain one large single bowl.
Is a 10 inch sink too deep?
While 10 inches has its benefits, members with relatively shorter heights may experience discomfort. Beyond this, it will be too deep for sinks unless you do not experience back strains or the kitchen has a significantly low platform.
Is a single or double kitchen sink better?
1. They often fit better in smaller spaces. Especially in kitchens with limited counter space, single-bowl sinks have an advantage over the usually larger double-bowl designs.
How do you measure a vanity sink?
Here’s how to measure for a basin
- Start with the width. Measure the distance from one side of the basin to the other.
- Next, measure the length. This is the distance from the rear of the basin to the front.
- Then, on the exterior of the basin, measure from the top to the bottom. …
- Finally, measure the depth.
What size are bathroom sink drains?
While a bathroom sink’s design and overall size may vary from one model to the next, the drain holes are fairly standard, 1.25 inches being a general standard, with widths of 1.5 inches and 1.625 inches also common. The size of the hole helps determine which size drain is needed for that particular sink.
What sizes do undermount bathroom sinks come in?
Undermount Bathroom Sink Sizes
Rectangular undermount sinks measure from 12 to 20 inches long and 16 to 24 inches wide, while oval undermount sinks are 12 to 17 inches in diameter.
Can you use a kitchen base cabinet as a bathroom vanity?
Kitchen cabinets and bathroom sink cabinets are not mutually exclusive, and can cross over if done correctly. Simply choose a kitchen cabinet then put a vanity tops on it to transform it into a bathroom vanity cabinet.
What is the difference between a bathroom vanity and a kitchen cabinet?
Bathroom cabinets are different from kitchen cabinets
Remember, bathroom cabinets don’t have connected sinks—those are bathroom vanities. Bathroom cabinets tend to be shallower than kitchen cabinets. They are also shorter, but you can customize the size and height that work best in your bathroom.
Can you use kitchen cabinets as a vanity?
You can convert a kitchen cabinet to a vanity simply by trimming it down. Drawers are not an option on vanity cabinets because the plumbing and sink use the space required for drawers.
What height should bathroom sink be?
A bathroom sink should sit somewhere between 29 and 36 inches high, depending on several factors. Traditionally, 32 inches was the norm, but modern standards have made 36-inch height common as well.
How do you raise a low bathroom vanity?
4 Ways to Raise a Bathroom Vanity
- Raise the Countertop – “High Heels for Your Vanity” …
- Add Permanent Legs to Your Existing Vanity. …
- Adjustable Cabinet Legs. …
- Install a Wood Foundation. …
- Raising Wall Mounted Vanities. …
- Detaching the Vanity from the Wall. …
- Turning Off the Water.
Do kitchen and bathroom countertops have to match?
Generally speaking, there’s no reason that bathroom countertops and kitchen countertops absolutely have to match. However, some homeowners can create a cohesive look when they use the same countertops in their kitchen and bath designs.
How close to a toilet can an outlet be?
This often requires a electrical outlets within 4 feet of the toilet.
Where should I put my vanity outlet?
The National Electrical Code doesn’t have any specific requirement regarding the height of a receptacle above a vanity. The only thing the NEC requires is that there must be one outlet within 36 inches of the outside edge of the sink, and it must be in the wall adjacent to the basin or countertop.
Do I need a GFCI outlet in my bathroom?
The National Electric Code states that, at a minimum, a bathroom needs one GFCI-protected outlet. It’s recommended that each bathroom has two or three GFCI protected outlets. The number of outlets you choose to protect is up to you, as long as you have at least one GFCI protected outlet in a bathroom.