What size does azek come in?

What size does AZEK trim come in?

AZEK Trim does not require paint for protection but is easily painted for aesthetic purposes. AZEK Trim is available in two finishes: Traditional has a smooth, semimatte finish while Frontier features a rustic, woodgrain appearance.
…

5/8 X Thickness
5/8″ x 11 ¼″	12′ and 18′
5/8″ x 15 ¼″	12′ and 18′

What width does azek come in?

Superior technology allows for unique design options including a wider width (7.25″) deck board and a narrow width deck board (3.5″) in addition to the standard width (5.5″) deck board.

Does azek come in 4×8?

AZEK Trim 3/8 in. x 4 ft. x 8 ft.

How long is AZEK Trim?

AZEK Trim 1 in. x 3-1/2 in. x 12 ft.

What is the difference between Trex and AZEK?

AZEK is a PVC product and will have a different feel and look to it then Trex, which is a capped composite. AZEK will be much lighter in weight and feel slightly different under your feet. The sheen is also different between the two — AZEK has a glossier sheen than Trex’s capped composites.

Is AZEK rot proof?

AZEK TRIM FINISHES AND OPTIONS

All our trim options are made from rot-resistant engineered polymer and are backed by a lifetime limited warranty.

Does AZEK look like wood?

Best of all, AZEK Siding’s genuine wood grain pattern looks like rough-cut cedar for a richness that will transform any home into a masterpiece.

How thick is AZEK decking?

For instance, TimberTech AZEK MAX boards are the same thickness (1.5”) as traditional wood 2 x 6 boards, giving you a clean, flat surface between the old and new sections.

Is PVC trim the same as AZEK?

But unlike its cousin, PVC azek trim is specially formulated to make it resistant to sunlight, hold paint well and easy to work with.

Can you screw into AZEK?

A #8 trim screw may be used and works well with AZEK Trim and Moulding products. To take advantage of the performance of AZEK Trim and Moulding products, use a highly durable fastener such as stainless steel or hot dipped galvanized. Staples, small brads, and wire nails must not be used.

How much is a sheet of AZEK?

3/4″ x 4′ x 8′ AZEK Sheet – Traditional Finish (smooth)

Code:	3/4-AZEK-4×8
Price:	$304.69
Quantity (Each):	* * *
Product Total:	$304.69

Can AZEK be painted?

Yes, Azek accepts and holds paint pretty well. However, if you choose to paint Azek a custom color, you must use 100 acrylic latex paint with a color bearing a Light Reflective Value (LRV) of 55 or higher.

Does AZEK Trim have to be painted?

Azek maintains that it does not require painting for a maintenance free product and we agree. … Make sure to wipe down the Azek with denatured alcohol to clean and properly prepare the surface before painting. • Your paint needs to be 100% acrylic.

Does AZEK make shiplap?

AZEK Tongue and Groove profiles, available in shiplap and reversible WP4/nickel gap form factors, offer enhanced design and installation flexibility. Choose your own aesthetic, our profiles are equally suitable for horizontal and vertical orientation. Crisp, white semimatte finish complements all housing exteriors.

What sizes does PVC trim come in?

Stealth Trim

Stealth Trim	Length
Nominal Sizes	Actual Sizes	18′
5/4” x 4”	1” x 3 1/2”
5/4” x 6 ”	1” x 5 1/2”
5/4” x 8”	1” x 7 1/4”

Is AZEK worth the money?

Azek is quite a bit more expensive due to how it’s made but it’s a great long term value that’s more durable than Trex. However, premium grade Trex isn’t cheap, it’s also very durable but has a more natural look and feel than Azek.

Does AZEK decking get slippery?

Water on any surface increases the risk of slips and falls. Decking is no exception. But when deciding between wood or composite decking, how slippery they are matters.
…
What Increases Grip on Composite Decking?

	Slip Resistance (Dry)	Slip Resistance (Wet)
Azek Harvest	0.54	0.43
TimberTech Terrain	0.54	0.43

Does AZEK decking get hot?

*Although TimberTech AZEK decking products are cooler to the touch than many other deck board products, all decking products will get hot in the sun. Additionally, the darker the decking color, the hotter it will feel. For hotter climates, consider choosing a lighter color.

Is AZEK better than wood?

Azek and Trex Deck Care

This is where both materials shine! Trex and Azek require far less maintenance than a traditional wood structure. From resistance to moisture and mildew to the elimination of the regular painting or staining cycle, these materials require far less care than wood.

Is AZEK waterproof?

Besides being waterproof and incapable of rotting, Azek and other PVC trims will not allow damage from termites, carpenter bees or other woodboring insects, and it is naturally antimicrobal and mildew-resistant.

Is AZEK structural?

AZEK® Column Wraps are not structural and are not intended for load bearing applications. Manufactured edges of the column wrap are sharp and should be handled with care.

Can AZEK be sanded?

porch building with Azek – sanding, plugging, durabond – YouTube

How do you fill holes in AZEK Trim?

Filling Nail Holes in VERSATEX PVC Trimboard – YouTube

Is AZEK yellow?

Can AZEK^® Moulding yellow over time? Unlike some exterior moulding on the market, AZEK Moulding resists yellowing over time due to the UV protection throughout the product.

What is a 5 4 inch board?

5/4 means approximately 1-1/4″ thick. 6/4 means approximately 1-1/2″ thick. 8/4 means approximately 2″ thick.

How wide is a 5 4 deck board?

5/4 Decking Actual Dimensions 1″ x 5.5.”

If you use 5/4 decking, you are getting two-thirds of the board of a 2×6.

How thick is a 1×6 deck board?

1×4 and 1×6 boards lose 1/4 inch in thickness and 1/2 inch in width before leaving the mill. That means a 1 x 4 board is actually 3/4 inches by 3 1/2 inches. The larger 1x boards (1×8, 1×10, etc.)

Can you use a nail gun on PVC trim?

Nail guns can be used – PSI between 80- 100 dependent upon gun, nail, outside temperature and substrate. Use 7d trim screws to better control expansion / contraction. In temps under 40°F pre-drilling may be required, depending on the fastener used.

How do you seal PVC trim edges?

How to Finish PVC Trim Cut Edges and Ends – YouTube

Can you nail interior PVC trim?

Tip 2: PVC is an entirely different material than wood. However, its workability is similar to wood. You can easily cut, nail, screw PVC Trim board with the same tools as you would use with wood.

How much space should be between AZEK deck boards?

Attach rim joist covers using screws roughly 12” on center. Use a spacer to create a gap of 1/8” to 1/4” between each deck board. Fasten and space deck boards until surface is covered.

Can you pressure wash AZEK decking?

Because it’s so strong, you can power wash AZEK decking. Just keep the pressure under 1200 PSI. People with industrial strength power washers should tone it down on all products. The most power you’ll ever need is 1600 PSI tops.

How do you hide screws in azek?

Cortex® Hidden Fastener System for TimberTech® AZEK® Decking

How do you glue azek?

How to Use AZEK PVC Adhesive – YouTube

What does AZEK Trim weigh?

How to Use AZEK PVC Adhesive – YouTube

What is azek made of?

It is made from 95 percent recycled materials, including recycled sawdust, and claims to be the most eco-friendly decking material on the market. What Is AZEK? AZEK is a cellular PVC material that’s made using weather-resistant technology.

Is AZEK a PVC?

AZEK decks are made from polyvinyl chloride, or PVC, which is the same material used in vinyl siding. AZEK decking is known for its exceptional strength, durability, and low maintenance. Since it doesn’t contain any wood or wood by-products, AZEK boards don’t absorb moisture that can cause wooden boards to warp or rot.

What is a good LRV for exterior?

A good white exterior paint should have an LRV between 73-ish to 85.

Should I prime PVC trim before painting?

Does PVC trim require a primer? A primer is only needed if you want the paint manufacturer’s warranty. Excellent adhesion can be achieved by properly cleaning the board before applying a topcoat of paint to PVC trim.

Can AZEK paint black?

PaintPro has the same high-performance and low-maintenance benefits of traditional AZEK trim, but can be painted any color. No primer needed. Just one coat of paint provides solid, clean coverage, even in dark colors. Get work finished faster thanks to quicker drying time.

Should PVC trim be painted?

PVC comes in white, so it typically has to be painted to match any existing trim, it also comes in the same shapes and sizes as wood, so it is nearly indistinguishable from any nearby trim that has not been replaced.

Does AZEK make siding?

Siding. Deliver timeless beauty without the constant maintenance. AZEK Siding products are made from engineered polymers with moisture resistant performance which makes them adaptable to complement the entire home exterior, from dormers and gables to full homes.

Can you waterproof shiplap?

Is shiplap waterproof? In a short answer, no. Wood is susceptible to rot, so precautions need to be taken in a moist environment like a bathroom. Paint or a top coat will help seal the wood to make it more waterproof.

Can you use azek in shower?

The Azek material is a completely water proof PVC material, and only needs to be installed so that it doesn’t fall off. Since the shower cavity is already water tight, the Azek is laid on from the bottom of the shower up. An excellent water proof adhesive that sticks to PVC and the wall is used.

Is shiplap OK to use in bathroom?

Whether you decide to install shiplap as an accent wall, on your ceiling, or as a half wall application, shiplap is a great addition for virtually any bathroom.