Tables are typically 36 inches wide, says Home Stratosphere. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
How big is a 10 top table?
A standard, rectangular 10-person table measures 96-inches long.
How long is a 10 seat dining table?
Standard Dining Table Sizes
| Seats | Length |
|---|---|
| 4-6 | 68-72″ |
| 6-8 | 72-80″ |
| 8-10 | 80-92″ |
| 10-12 | 92-110″ |
How wide should a 10 person table be?
To seat 10, five side-by-side, you should aim for a minimum length of 10 feet and width of 2 feet 6 inches (305 x 76cm). If you want to include a head and foot setting, aim for 10’6″ x 3 feet (323 x 91cm), or ideally 11′ 6″ x 4’6″ (354 x 140cm) for generous seating space.
What is the diameter of a 10 Top Round table?
Small round tables for two start at a diameter of 2’6” (76 cm) and grow up to sizes for four to six people at of 3′-4’6” (91-137 cm). Large circular tables for groups of 10-12 people have diameters between 7′-8′ (213-244 cm).
What size table fits in a 10×10 room?
There is adequate space for seating and a walkway behind the diners with a clearance of 36 to 42 inches from table edge to a wall or other furniture. A table 36 to 42 inches wide and 60 to 72 inches long can be accommodated in a dining room.
CONTINUE READING BELOW
How long is a 12 seater table?
You need about 1 1/2 to 2 feet to seat a diner comfortably, so a table about 9-10 feet long would work for 12. Pedestal tables can accommodate guests better since there’s no leg to get in the way.
How many does a 72 inch table seat?
If you have a 6 foot round table (72 inches), you can seat 8-10 people at the table. If it is a 30 inch by 72 inch rectangular table, 6-8 seats will fit around the table, with 3 chairs on either side and 1 chair at either end.
How long is a table for 6?
For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.
What is a good size dining table?
Most rectangular tables are between 36″ and 40″ wide. A table that seats four should be about 48″ long. To seat four to six people, look for a table that is at least 60″ long. For six to eight guests, your table should be at least 78″ long.
How many inches is a 10 person round table?
How many people can sit at a 60 inch round table? 8-10 people can fit at a 60″ round table. If you seat 10, everyone will not be able to slide their chairs under the table. If you have formal place settings, you definitely can’t fit more than 8.
What is the standard size of a dining room?
According to Home Stratosphere, the average dining room size in the United States is 14 x 16 feet or 224 square feet. More “generous” dining rooms are sized at 14 x 18 feet or 252 square feet. This larger size allows for a formal table and larger size chairs.
What size round fits 10 people?
Seating Planner
| Seating Capacity for Tables | |
|---|---|
| Table Size | Number of People |
| 72 inch Round (6′) | Seats 10 – 12 Adults |
| 60 inch Round (5′) | Seats 8 – 10 Adults |
| 48 inch Round (4′) | Seats 6 – 8 Adults |
How wide is a 60 inch round table?
60 inch round table: 120 inch cloth (30 inch full drop) 72 inch round table: Seats 10 People: 120 inch cloth (24 inch drop) 72 inch round table: 132 inch cloth (30 inch full drop)
How big of a room do you need for a 60 inch round table?
Use 12 sq ft per person for 60 in round tables with 8 per table or any other round table.
How long is a farmhouse table?
1. What size farmhouse table do I need?
| # of people | Seats comfortably | Workable size |
|---|---|---|
| 4 | 4′ rect / 48″ round | 42″ round |
| 6 | 6′ rect / 60″ round | 5′ rect / 54″ round |
| 8 | 8′ rect / 72″ round | 7′ rect / 66″ round |
| 10 | 10′ rect | 9′ rect |
How much room do you need for an 8 seater dining table?
Rectangular and Oval Dining
| People 2 | No Shared area 2′ x 2’6″ (61 x 76cm) | Ideal Size (with shared area) N/A N/A |
|---|---|---|
| 6 | 6′ x 2’6″ (183 x 76cm) | 8′ x 4’6″ (244 x 137cm) |
| 8 | 8′ x 2’6″ (244 x 76cm) | 10’6″ x 4’6″ (320 x 137cm) |
| 10 | 10′ x 2’6″ (305 x 76cm) | 11’6″ x 4’6″ (350 x 137cm) |
| 12 | 12′ x 2’6″ (366 x 76cm) | 11’6″ x 5′ (350 x 152cm) |
How do you pick the right size dining table?
Measure the length and width of your dining space. Subtract 6 feet from both the length + width of the space to allow a 3′ clearance on all sides. The result is the maximum recommended size for your dining table. For example, if you have a 12′ x 9½’ space, the maximum size for your table would be 72” x 40”.
How many chairs fit around a 10ft table?
4. How many chairs should I fit around a table? Plan for at least 2 feet of table surface for each chair. For example, a 10-foot-long table can have five chairs across and two at each end to seat 12 people.
How long is a table that seats 20?
So if you’re looking for a large rectangular table to seat 20, you can start by putting 2 folks on the ends of the table, then count 2 people each 2′ to seat the remaining 18 — or a total table length of 18′ (216″).
How many chairs do I need for an 84 table?
An 84″ rectangular dining table can seat up to 8 people comfortably. A 90″ rectangular dining table can seat up to 8 people comfortably. A 108″ rectangular dining table can seat up to 10 people comfortably.
How long is a rectangle table that seats 10?
To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
How many does a 90 inch table seat?
Tables that measure 90 inches and above are best for comfortably seating 8 or more people. Many of our large dining tables even come with extension leaves, which will expand the designs to greater lengths and fit more guests.
What size is a 8 seater table?
Dining Table Size Guide
| Size of Dining Table | Length | Width |
|---|---|---|
| 4 seater dining table | 75cm – 90cm | 75cm – 90cm |
| 6 seater dining table | 118cm – 140cm | 75cm – 90cm |
| 8 seater dining table | 150cm – 220cm | 75cm – 90cm |
| 10 seater dining table | 180cm – 280cm | 90cm – 100cm |
How long should a table be for 8 chairs?
Choosing the Right Dining Table Size
| Size (Diameter): | Oval &, Rectangular Will Comfortably Seat: | Round &, Square Will Comfortably Seat: |
|---|---|---|
| 5 feet (60 inches) | 6 people | 6 people |
| 6 feet (72 inches) | 6 people | 6 people |
| 8 feet (96 inches) | 8 people | Not a typical size |
| 10 feet (120 inches) | 10 people | Not a typical size |
What is the minimum width of a dining table?
Dining table width for place settings and serving pieces is a minimum of 36 inches (though it might be a little cozy). The minimum width of a table for reaching across to pass a dish is 48 inches. Dining table height is 28 to 30 inches.
What size room do you need for a 12 person table?
Large dining room for 12
You need about 16ft x 17ft 6″ of dining room space to fit in a dining table for 12, a sideboard and a few plants or dumb waiters.
How much space does a 72 round table with chairs require?
So let’s break this down into inches. The circumference of a 72-inch table is about 226 inches. In general, to sit comfortably most people need about 24 inches of table space.
How many tables do you need for 30 guests?
Common setup includes 4 eight foot tables. Conference style is NOT ideal for groups of more than 30 people. For groups of more than 30 and discussion/interaction needs to be made, U shaped is ideal.
What size room do I need for a 72 inch round table?
Using this guideline, a dining room 10-by-12-feet long accommodates a table 36 to 42 inches wide and 60 to 72 inches long.
How many square feet is 40 people?
Hollow square: 35 to 40 square feet per person. The hollow square is a popular option for groups of about 17 to 40. Classroom-style seating: 14 to 18 square feet per person at desks. Auditorium-style seating: 6 to 8 square feet per person.
How much room do you need for a 48 round table?
As a general rule, you need about 36 inches (3′) of space for a chair. It won’t take up that much space when drawn up to the table, but you need to be able to push the chair back to get up. Hence a 48-inch diameter round table actually needs a space of 10 square feet.