What size is a #36 drill bit?

Drill Bit Size Chart

Size	Decimal Equivalent	Size
81	0.013	1-5/32″
80	0.0135	29.50 mm
.35 mm	0.0138	1-11/64″
.36 mm	0.0142	30.00 mm

What decimal size is the #36 tap drill?

Tapping and Clearance Drills for Number Machine Screws

Number	Threads /Inch	Equivalents
(decimal)
3	56	0.0820
4	36	0.0860
40	0.0890

What size is a number 40 drill bit?

Number Size Drills

No.	Dia.
37	.1040
38	.1015
39	.0995
40	.0980

What drill bit is 4mm?

Metric Tap and Drill Bit Size Table

Tap	Metric Drill	US Drill
4mm x 0.7	3.4mm	–
5mm x 0.8	4.3mm	–
6mm x 1.0	5.2mm	–
7mm x 1.0	6.1mm	15/64″

What is the diameter of a number 21 drill bit?

Wire Gauge (Number) M2 High-Speed Steel Drills – Premium Swift Bore

Product No.	01421
Drill Size	No. 21
Decimal Inches	0.1590
For Tap Size	10-32 NF (National Fine SAE)
Weight	0.015 lbs

What size drill bit is 11 32?

Wire Gauge (Number) M2 High-Speed Steel Drills – Premium Swift Bore

Product No.	01421
Drill Size	No. 21
Decimal Inches	0.1590
For Tap Size	10-32 NF (National Fine SAE)
Weight	0.015 lbs

What size is a number 25 drill?

Wire Gauge (Number) M2 High-Speed Steel Drills – Premium Swift Bore

Product No.	01421
Drill Size	No. 21
Decimal Inches	0.1590
For Tap Size	10-32 NF (National Fine SAE)
Weight	0.015 lbs

What size is a number 44 drill bit?

The #44 drill bit (. 086 inch OD) is the standard bit used for nail axles from Cub Scout kits and other kits. It can be used to drill axle holes, or to create pilot holes in the standard axle slots.

What size is a number 43 drill bit?

Downloadable versions:

Drill size	Diameter (in)	Diameter (mm)
#43	0.0890	2.2606
2.3 mm	0.0906	2.3000
#42	0.0935	2.3749
3/32 in	0.0938	2.3813

How do I know what size my drill bit is?

Quick way to determine right size drill bit – YouTube

What size is a 4.5 mm drill bit?

Standard metric drill bit sizes

Drill size	Diameter (in)
4.3 mm	0.1693
4.4 mm	0.1732
4.5 mm	0.1772
4.6 mm	0.1811

What can I use instead of a 5/16 drill bit?

5/16 converts to 10/32. Assuming your bit set is that granular, the next larger size is 11/32, and the next smallest size is 9/32. Those aren’t necessarily common sizes, however. The next size up in x/16 would be 6/16, which is 3/8.

What size is a #31 drill bit?

Wire Gauge (Number) M2 High-Speed Steel Drills – Premium Swift Bore

Product No.	01531
Drill Size	No. 31
Decimal Inches	0.1200
For Tap Size	6-48 NS (National Special)
Weight	0.02 lbs

What size is a No 20 drill bit?

20 x 54mm HSS Double-Ended Panel Drill Bit – 10 Piece.

What size is a number 47 drill bit?

Standard Drill Sizes – Inches

Drill Size	.	Drill Size
49	=	57/64
48	=	29/32
5/64	=	59/64
47	=	15/16

What size is a number 30 drill?

Number Drill Sizes

Drill	Inch	mm
33	0.113	2.87
32	0.116	2.95
31	0.120	3.05
30	0.1285	3.26

What number is a 10mm drill bit?

Drill Bits. Wilko 10mm Masonry Drill Bit Number 21.

Is 3/8 drill bit the same as 10mm?

3/8″ bits have a nominal size being just ever so slightly under 10mm. You can’t drill a hole of any size and put something in it the same size. It must be a bit smaller than the hole you drill.

What size drill bit is a number 7?

A number 7 drill bit is 0.2010 inches. As a fraction, the 0.2010 decimal is 201/1000.

What is equivalent to a number 25 drill bit?

Decimal Equivalents from # 80 to 1″, .0135″ to 1.000″

Drill	Decimal	Decimal
9/64	.1406″	.2720″
27	.1440″	.2770″
26	.1470″	.2810″
25	.1495″	.2812″

How many 64ths are in a 16th?

Decimal Equivalents from # 80 to 1″, .0135″ to 1.000″

Drill	Decimal	Decimal
9/64	.1406″	.2720″
27	.1440″	.2770″
26	.1470″	.2810″
25	.1495″	.2812″

What is the most common drill bit size?

Drill Bit Size

There are drill bit sets or packs that usually contain bit sizes that range from 1/16 of an inch to 1/4 of an inch, which are common sizes for home and shop projects. Other sizes of use would include 1/2 of an inch, 7/16 of an inch, 5/16 of an inch and 3/8 of an inch.

What size is #8 drill bit?

What Size Drill Bit for a #8 Screw?

Size of Screw	Drill Hole Size (Softwood)	Drill Hole Size (Hardwood)
#5	1/16″	5/64″
#6	5/64″	3/32″
#8	3/32″	1/8″
#10	7/64″	1/8″

What size drill bit is M8?

Tap Size

Tap Size	Drill Size
M6.3 x 1	5.5mm
M7 x 1	6.1mm
M8 x 1	7.1mm
M8 x 1.25	6.7mm

What number drill bit is 1 8?

Drill Bit Size Chart

Size	Decimal Equivalent	Size
84	0.0115	3.10 mm
.30 mm	0.0118	1/8″
83	0.012	3.20 mm
82	0.0125	3.25 mm

What do the numbers on drill bits mean?

The numbers indicate how easily the drill will “cam out”, or stop driving the bit. Lower numbers mean the drill will cam out with less torque, for example when you are driving a screw into something soft and you don’t want to overdrive it and strip the screw.

What is a 6mm drill bit in standard?

6mm is 0.2362198 inches. 15/64 is 0.234 inches. That’s about as close as you can get in fractions.

Is a 1/4 drill bit 6mm?

6mm Drill Bit (~1/4″)

What size drill bit do you use for a 5/16 bolt?

I would go with a 3/8″ hole for a 5/16″ bolt or an 11/32″ hole if you need a tighter tolerance.

What size drill bit do you use for a 5’8 tap?

Contact us for more information.
…
Tap and Drill Size Chart.

THREADSIZE	DRILL DIAMETER Coarse Thread	TAP DRILLSIZE
7/16-20	.3906	25/64
1/2-20	.4531	29/64
9/16-18	.5156	33/64
5/8-18	.5781	37/64

What drill bit can I use instead of 3 8?

If it’s UNF 3/8 24TPI, you need 1/24″ smaller drill, which means a 0.3333″. 21/64″ would be slightly under, 11/32″ slightly over. A letter R drill would probably be “perfect”, a letter Q drill is about a thou under.