What size Mitre saw for trim work?
If you only expect to use your miter saw for cutting trim or siding, and don’t plan on cutting anything more than an inch thick or 6 inches wide, a 10-inch miter saw should be sufficient. But if you need to cut larger boards, or just want more versatility, a 12-inch miter saw is the better choice.
Is a 12-inch miter saw overkill?
But if you’re not a millionaire, think carefully about what you expect to do with your miter saw. If you’ve never even thought about needing the extra capacity the 12-inch provides, save your money and get the 10-inch. Don’t buy more tool than you need – buy the right tool for the job.
How big of a board will a 12-inch miter saw cut?
Saws start to differ when you look at their blade diameter—commonly 10 inches or 12 inches. The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees, a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.
What size saw blade for trim?
The best saw blade for cutting trim will be a thin blade with a tooth count of 80-100. This type of blade will yield a precision cut with little tear out. When selecting a blade for trim work try to find a blade with a thin kerf for better results.
Can a 12 miter saw cut a 6X6?
The 12-inch miter saw will be able to cut through a 6X6 piece of lumber however not on a single go. These are great saws for 2X6 cuts.
Can a 12 inch miter saw cut a 4×6?
Yes! A 12” miter saw can easily cut a 4 x 6 lumber. A 12 inch miter saw clearly has a bigger blade and has the capability to cut 4×6 lumber in a single pass.
CONTINUE READING BELOW
Can a 10 miter saw cut a 4×4?
If you really want to cut 4x4s reliably, and if you foresee many future projects involving 4x4s, then you’re asking the wrong question. It shouldn’t be a matter of whether a 10-inch miter saw can cut a 4×4, but rather what miter saw is better suited for cutting 4x4s? The short answer is, you need a 12 inch miter saw.
How thick of wood can a 10 miter saw cut?
A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
What is a 10-inch miter saw good for?
Common Uses for a 10-Inch Miter Saw
Perfectly angled miter cuts. More complex bevel and compound angle cuts. Cutting plastic and metal pipes to length. Precise repeated cuts.
Can you put a 10 inch blade on a 12 inch saw?
Putting a 10-inch blade on a 12-inch saw isn’t a good idea. It’ll spoil the dynamics, probably won’t run at the intended speed, and will reduce cutting capacity. It’s also important to check the arbor size (effectively the hole in the middle) as this is how it mounts onto the saw.
How long can a sliding miter saw cut?
Sliding compound-miter saws will work just like chop saws, but because their blades move back and forth on horizontal rails, they also can slice stock up to 15 inches wide in one stroke.
Can you cut a 2×12 with a miter saw?
Miter Saw Limitations
The biggest drawback of a miter saw is that the smaller (and cheaper) sizes can’t cut completely through wide material, such as 2×10 or 2×12 boards, in one pass. Well, a sliding miter saw can make these cuts, but you’ll spend twice as much for one.
How do I choose a miter saw?
How to choose a miter saw – YouTube
How do I choose a miter saw blade?
Choosing a miter saw blade means identifying:
- the materials to be cut – wood, non-ferrous materials, plastic – determine the plate ,
- the type of tooth – relative to the material cut and the type of cut desired – and the step , the greater the space of the step, the more the is preferred,
What is a 7 1 4 miter saw used for?
The compact size of this single bevel compound miter saw makes it easy to transport, set up and take down. The high power 9.5 amp, 5200 RPM motor for quickly cutting trim and molding – even 2 x 4 lumber. The compound saw is designed for 45° left bevel cuts and 47° miter cuts left or right with positive stops.
How do you cut 4×6 lumber?
How to Accurately Cut a 6×6 – YouTube
Is a miter saw worth it?
Miter saws are a valuable tool for the DIYer, and a must-have tool for a fully functioning workshop. They are designed to quickly cut crown molding, door frames, window casings, and picture frames. Miter saws can also make straight cuts for general do-it-yourself woodworking projects.
How do you notch a 6×6?
2 Easy Ways To Notch A Post – YouTube
Can a 7 1 4 miter saw cut a 4×4?
No not with one cut. You would have to turn the 4×4 over. Blade is a 7 1/4″ diameter, same as a hand held circular saw.
Do you push or pull a sliding miter saw?
Sliding miter saws are designed to cut on the push stroke. Pulling a miter saw through the cut results in a climb cut that could cause the blade to rise up out of the wood and chase after you. Also, it is important to use a blade with teeth that angle forward between 0° and 5°.
How wide can a 7 1 4 miter saw cut?
The RYOBI 7-1/4 in. Sliding Miter Saw is a new edition to the miter family. It can make angled cuts up to 45° on boards all the way up to 6 in. wide, and has a max RPM of 5,350.
What do you use to cut a 4×4 post?
The best way to cut a 4×4 post is by using a 12-inch miter saw, 10-inch radial arm saw, both of which can cut completely through a post in one pass, or a standard circular saw that can make precise cuts in two passes with the help of a simple jig.
How thick can a 10 table saw cut?
Cutting Depth and Blade Size
With a 10-inch table saw, you can make a maximum cut up to 3½ inches deep, and with a 12-inch table saw, you can cut up to 4 inches deep.
What is the best way to cut a 4×4 post?
2 Ways to Cut a 4×4 Without a Miter Saw – YouTube
What is the difference between a compound miter saw and a miter saw?
While compound miter saws tilt in only one direction, dual compound miter saws can tilt both left and right. They can quickly create bevels at any angle.
What does a dual bevel miter saw mean?
Dual-Bevel Compound Miter Saws. The blade angles of a dual bevel miter saw can adjust to both the left and right, as opposed to just one side, like the single bevel saw. … Double bevel miter saws allow you to make precise and uniform cuts on both sides of your workpiece.
What is the highest rated 10 inch sliding miter saw?
The Best 10-inch &, 12-inch Miter Saws in 2022 (Compound/ Sliding)
- Hitachi C10FCH2 10” Miter Saw.
- Makita LS1016L10” Miter Saw.
- DEWALT DW713 10” Miter Saw.
- DeWalt DWS780 12” Miter Saw.
- Bosch GCM12SD 12” Miter Saw.
- DeWalt DWS715 12” Miter Saw.
What’s the difference between a single bevel and a double bevel miter saw?
What’s the Difference Between a Single Bevel and Double Bevel Miter Saw? A single bevel miter saw can only tilt in one direction (either left or right). A dual bevel miter saw can tilt in both directions.
Can I use a 12 blade on a 14 miter saw?
Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″).
Can you put a 7 blade on a 10 miter saw?
Yes you can.
The only real difference, besides maximum cutting depth, is that smaller blades are often thinner and have a narrower kerf.
Can you put an 8 blade on a 10 miter saw?
As long as the diameter of the arbor hole on the stacked dado blade set matches the arbor diameter of your table saw or radial-arm saw—and the arbor is long enough for a dado blade—you can use an 8-inch dado blade on a 10-inch table saw.
Can I use a miter saw on the ground?
We don’t recommend using a miter saw on the ground. It’s a trip hazard and can lead to a back injury from handling a heavy saw (often 50lbs+) and lumber. Most manufacturers recommend bolting down a miter saw before use, which is difficult to do on the floor but can be achieved on a workbench.
Can you use a miter saw for long cuts?
To make level cuts, a miter saw works by pulling a saw blade spinning down onto lumber or workpiece in a short controlled movement. This rugged wood cutting tool is mounted on a mitering table that is adjustable for crosscut. Thus, there are no miter saw with the capability of cutting a board lengthwise.
How do you miter a 2×12?
Cutting Wide Boards – YouTube
How do you use a miter saw for beginners?
MITER SAW FOR BEGINNERS – YouTube
How much does a good miter saw cost?
A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.
What kind of miter saw do I need for crown molding?
A power miter saw is the best way to cut crown moulding once you measure the angles. The saw can be adjusted to cut at any angle – set it to 45 degrees for one side of a standard 90-degree corner. The saw can be set to 45 degrees to the left or 45 degrees to the right.
How many teeth is best for a miter saw blade?
60 tooth miter saw blades are the best options for ripping the wood. While the 80 tooth miter saw blades produce finer results due to the higher number of teeth. Both have their pros and cons though.
Is more teeth on a saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
How many teeth should my saw blade have?
Ripping: 10-inch blades with 24-30 teeth and 12-inch blades with 40 or fewer teeth. Crosscutting: 10-inch blades with 60 teeth and 12-inch with 80 teeth.