What size tires fit 20×9 wheels?

What is the widest tire for a 20×9 rim?

275/40/20 Is the largest recommended, but plenty (myself included) run 295/45/20 in the rear for a bit taller sidewall.

What size tire fits a 9 inch wide wheel?

Equivalency table

Rim width	Minimum tire width	Ideal tire width
8,0 Inches	215 mm	225 or 235 mm
8,5 Inches	225 mm	235 or 245 mm
9,0 Inches	235 mm	245 or 255 mm
9,5 Inches	245 mm	255 or 265 mm

What size tires can I put on 20 inch rims?

19 inch wheels: 245/45 R19. 20 inch wheels: 245/40 R20.

How do I know what tires fit my rims?

Width and diameter are the two factors that determine tire and rim compatibility. For diameter you’ll need to be sure that your tires and wheels are an exact match, e.g. a 215/65R17 tire will only fit on a 17″ diameter wheel. There’s a bit more flexibility when it comes to wheel widths.

What does 20×12 mean?

20 inches in diameter by 12 inches wide. Wheels are referenced: Diameter x Width. 15.

What tire sizes mean?

The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.

Can you run a 285 tire on a 9 inch rim?

The tire manufacturers state that a 285 needs to be on a 9.5.

Will a 305 tire fit a 9 inch rim?

305 nittos are fine on a 9 inch rim…. biggest size you can go on a nine inch rim is nitto 555r 315.

Can you put 305 tires on 9.5 rims?

Dossey said: Yeah, this. There’s no real performance benefit to running a 305 on a 9.5″ wheel.

Can a 19 inch tire fit on a 20 inch rim?

Can I put a 19-inch tire on a 20-inch rim? – Quora. Yes, you could with enough effort. However, it will not seal and act as a tire should.

What size is a 285 65R20?

285/65R20 tires have a diameter of 34.6″, a section width of 11.2″, and a wheel diameter of 20″. The circumference is 108.6″ and they have 583 revolutions per mile. Generally they are approved to be mounted on 8-10″ wide wheels.

What is 285 60R20 in inches?

P-Metric Tire Sizes – P-Metric to Inches Conversion Chart

Rim Size	P-Metric Size	Actual Tire Height
20 Inch	285/60R20	33.4 inches
285/65R20	34.5 inches
295/55R20	32.8 inches
295/60R20	33.9 inches

What is the difference between a 60 and 65 series tire?

The 65% aspect ratio (as in 235/65/17), compared to 60%, adds almost 12 mm (1/2″) to the radius of the tire (0.65-0.60)*(235mm)=11.75mm.

Can different size tires fit on the same rim?

You can change the size of your tires with the same rims, as long as the tire and rims have the same internal diameter. Tires are flexible, however, so the width and height may be changed.

Can any tire fit on any rim?

Wheels and tires are not interchangeable words. Tires are a part of the wheel setup. For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size.

What does JJ mean on a wheel?

Helpful Expert Reply: The “JJ” that you mentioned finding on the wheel size listed for the units mounted to your trailer refer to the contour of the bead seat on the wheel, essentially its shape ( “J” indicates the shape of the letter J).

What do numbers on wheels mean?

The wheel size is the size designation of a wheel given by its diameter, width, and offset. … For example, 17 x 8.5 x +35 designates a diameter of 17 inches, width of 8.5 inches, and +35 mm positive offset (432 × 216 x +35 in fully metric numbers).

What does et30 mean in wheels?

The “et30” in [17×9 et30 5×100] represents the Wheel Offset(millimeters). Now we’re switching to metric. The wheel offset is a bit harder to explain. Looking at the picture here: We can see that with a “0 (zero)” offset, the point at which the wheel is bolted onto the wheel hub “splits” the wheel width in 2.

Can I use 60 instead of 55 tires?

Most likely yes. The 55 or 60 in this case is the aspect ratio. It’s how tall the tire is as a percentage of its width. A 60 means the tire’s sidewall height is 60% of the width of the tire.

Will a 65 tire fit a 60?

Yes, the only real difference is that ratio between the tread width and the height of the sidewall will change. The lower the middle number the lower the profile of the tire the larger the number the higher the tire profile.

What does the R mean in tire size?

R indicates the construction used within the tires casing. R stands for radial construction. B means belted bias and D stands for diagonal bias construction. 17 The last dimension listed in the size is the diameter of the wheel rim, which is most often measured in inches.

Will a 265 tire fit a 9 inch rim?

A 265 on a 9″ rim is the minimum rim size and will slightly pinch the tire….which means you may not get the full benefit your seeking of a wider foot print. A 255 would be a better match, or svn a 245 where you would have a slight stretch.

Will a 225 tire fit a 9 inch rim?

yes it will…. I’m running a 225 on a 9. Depending on what tire you get will depend on how much stretch will happen. Some tires stretch better then others.

Will a 235 tire fit on a 9 inch rim?

235mm tread tires theoretically shouldn’t be a stretch on 9″ wide wheel, seeing as 235/25.4=9.25 inches.

Will a 295 tire fit a 9 inch rim?

Premium Member. Yes it will technically fit for the rears but most probably will recommend not to go over a size of 275/40/20 for a 9″ wheel.

How wide is a 295 tire?

295/50R15 tires have a diameter of 26.6″, a section width of 11.6″, and a wheel diameter of 15″. The circumference is 83.6″ and they have 758 revolutions per mile. Generally they are approved to be mounted on 8-10.5″ wide wheels.

Will a 12.5 tire fit a 9.5 rim?

You can fit a 12.5 or 13″ wide tire on a 9.5″ wheel without any problems.

Will a 275 tire fit a 9.5 wheel?

Yep, you’ll be completely fine with a 275 on a 9.5″ wheel.

Will a 285 tire fit a 9.5 rim?

Registered. 285’s will look better and help protect the wheel more, if they dont rub of course. i have 275’s on a 9.5″ rim and 285’s would look better. 285’s on a 9.5″ rim is in no way unsafe.

What does 35X12 50R17 mean?

35X12.50R17. Diameter : 35.0″ Width : 12.5″ Wheel : 17″ x 8.5-11″

Are 19 or 20 inch wheels better?

19″ to a 20″ set up is not a very big jump. The difference is minimal. The nice thing about a 20″ rim is that you will have 10x the tire choices. That means you have options with better grip, better ride and better cost.

What is the advantage of 20 inch wheels?

They can provide additional control. Since 20-inch tires typically have a smaller sidewall, they tend to retain relatively more rigidity on the road. The additional rigidity may give drivers of certain vehicles slightly better handling when cornering.

What size tire is a 295 65 20?

295/65R20 tires have a diameter of 35.1″, a section width of 11.6″, and a wheel diameter of 20″. The circumference is 110.2″ and they have 575 revolutions per mile. Generally they are approved to be mounted on 8-10″ wide wheels.

How tall is a 285 60R20?

This number indicates that your tire has a width of 285 millimeters. This number means that your tire has an aspect ratio of 60%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 60% of the width. In this case, the sidewall height works out to be 171 millimeters.

What size tire is 285 60R20?

Tire Size Calculator – Tire &amp, Wheel Plus Sizing BETA

	Unit: Imperial Imperial Metric
Section Width	11.22 in
Rim Diameter	20.00 in
Rim Width Range	8.00 in – 10.00 in
Overall Diameter	33.46 in

Are 33 inch tires the same as 285?

YES, 285 wide tires are the same as 33” tires although 285 is the tread width in millimeters and 33″ is the tire diameter. 285/75/16 is usually the accepted metric equivalent size for 33’s.

How tall is a 295 60R20?

The 295/60R20 is only 11.62 wide and 33.94 tall. The 295 will also hold more weight.

What size is a 33 inch tire on a 20 inch rim?

Tire size equivalent chart for 33″, 35″, 37″ or 40″ tires

33″ Tires (+/- 0.50″ in overall diameter)
275/65-20	35X12.50-22	325/45-24
285/65-20	325/50-22
295/65-20
315/60-20

Can I use 55 tires instead of 65?

They will fit all be it a lower profile tire. The 55 is the “height” of the tire. From a strictly ‘will it fit’ stand point, yes. 205 is the height, the 55 is slightly wider than the 65 (it’s a ratio), and the 16 is the rim diameter.

Which tire is wider a 65 or 70?

The series number in a tire-numbering system refers to the aspect ratio of the tire’s sidewall height to its width. A series 65 tire’s height is 65 percent of its width, a series 70 tire’s height is 70 percent of its width and so on. These differences in height affect both performance and safety issues while driving.

Will 275 65R20 fit 275 60r20?

they will be fine, speedo will be out by a hair but nothing noticable, the 65 is the height of the sidewall so its just a slightly smaller profile. 275 is the width in millimeters and the 65 r 60 is the percent of that.

Is it OK to go up one tire size?

As a general rule of thumb, it’s safe to fit a tire up to 20 millimeters wider than stock on the original rim. The actual width of the tire will vary depending on the width of the rim: The tire will expand 5 millimeters for every half inch (12.5 millimeters) increase in rim width.

Can I change my tire size without changing rims?

It’s possible to change the size of your tires without actually changing the diameter. One example is if you want larger rims – you can buy tires that compensate for the larger rims by reducing the “height” of the outer tire.

How much difference in tire size is acceptable?

When changing tire sizes, we recommend staying within 3% of the diameter/height of the original tire. Any more than this and you face the risk of brake failure.