Why is Cerakote so expensive?

How long does Cerakote last on a gun?

Longevity: 5+ Years. Sometimes when the two are visually compared side by side in the same camouflage pattern, there may be a difference in color saturation. With cerakote, color is applied directly to the surface of the gun, which may slightly alter the tone depending on the color of the surface prior to application.

Is Cerakote bad for your gun?

Much like most paints, cerakote is applied with a spray gun of sorts. And yes, it is toxic, so protective equipment must be worn. You know, like, blindness or permanent nerve damage toxic — protection isn’t optional.

How good is a Cerakote finish?

5.0 out of 5 stars Extremely smooth and durable coating as long as you follow instructions. Cerakote is an awesome coating as long as you prep/apply correctly. … I’ve used it several times to coat watch cases, which have stood up to significant abuse over the years, but wanted to coat a recently purchased shotgun.

Does Cerakote scratch easily?

Hardness: Test reports have rated cerakote coatings with a pencil hardness of 9H. Other than hardness, there is a scratch resistance rating of 6H. Cerakote ensures that you don’t end up spoiling your firearm because of any scratches or nails.

Will Cerakote wear off?

As far as wear, it’s natural for items to wear due to heat and friction. Cerakote isn’t the cure-all, end-all solution but it will last if it is properly taken care of. … It helps reduce friction and prolong your Cerakote finish.

Can you use gun oil on Cerakote?

If you have a firearm completely refinished in Cerakote or Duracoat, a period of 200 to 300 rounds is typically required for break in with quality gun oil or grease. … After this period you can run your weapon lightly lubricated!

Do Cerakote guns rust?

Cerakote is a type of gun coating as well as a finish, so it’s kind of like a lacquer for your gun. … It isn’t moisture proof, as blued steel needs a coat of water-repellant oil (such as a good gun lube or oil) to keep water out and rust from forming.

Does acetone remove Cerakote?

Acetone will not harm a fully cured Cerakote finish.

What is the most durable gun coating?

Black Oxide (Bluing)

As one of the least expensive corrosion-resistant finishes on the market, black oxide is often the preferred finish used on gun barrels and small components. Gun oil is important to this type of finish to avoid rusting.

Does Cerakote add thickness?

Most Cerakote applications, especially on firearms, involve a coating and curing process that leaves you with a 1 mil final thickness on top of the part, though this can be as low as a quarter of a mil, depending on the Cerakote Series.

Can you Cerakote anything?

Cerakote is a ceramic based finish that can be applied to metals, plastics, polymers and wood. … Each of these properties is rigorously tested to guarantee that Cerakote products remain at the forefront of the ceramic coatings market.

Is Cerakote better than bluing?

Cerakote ceramic coatings provide the durability and corrosion protection you need with the color you want, making it the perfect alternative to blueing. For the best in corrosion protection, Finish Strong™ with Cerakote.

What’s better DuraCoat or Cerakote?

DuraCoat – Weighing Your Options For the Best Firearm Finish. … Cured Cerakote absolutely beats cured DuraCoat in every measurable respect with regard to finish quality, abrasion resistance, and overall toughness.

Which is better anodized or Cerakote?

More durable than anodizing, this is the highest end finish you can apply to your rifle. Cerakote consistently wins all durability, lubricity, heat resistance, and endurance tests.

Can you touch up Cerakote?

(1mL) bottle of Cerakote (a part B catalyst is included with some as not all colors are air cure) to touch up any marks or scratches on your parts during assembly. … This eliminates the need for hardner and allows you to reuse the same bottle as often as needed until empty.